• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2009

This paper describes the non-stringed guitar composed of laser strings, frets, sound synthesis algorithm and a processor. The laser strings that can depict stroke and playing arpeggios comprise laser modules and photo diodes. Frets are implemented by voltage divider. The guitar body does not need to implement physically because commuted waveguide synthesis is used. The proposed frets enable; players to represent all of chords by the chord glove as well as guitar solo. Sliding, hammering-on and pulling-off sounds are synthesized by using parameters from the voltage divider. Because the pitch shifting corresponds to the time-varying propagation speed in the digital waveguide model, the proposed model can synthesize vibrato as well. After transformation of signals from the laser strings and frets into parameters for synthesis algorithm, the digital signal processor, TMS320F2812, performs the real-time synthesis algorithm and communicates with the DAC. The demonstration movieclip available via the Internet shows one to play a song, 'Arirang', synthesized by proposed algorithm and interfaces in real-time. Consequently, we can conclude that the proposed synthesis algorithm is efficient in guitar solo and there is no problem to play the non-stringed guitar in real-time.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel. undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesio-distally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference on fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even of that portion consists of mainly enamel and a little dentin structure.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel, undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesiodistally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference in fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even if that portion consists of mainly enamel and a little dentin structure.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.59-68
• /
• 1998

Digital hearing aids offer many advantages over conventional analog hearing aids. With the advent of high speed digital signal processing chips, new digital techniques have been introduced to digital hearing aids. In addition, the evaluation of new ideas in hearing aids is necessarily accompanied by intensive subject-based clinical tests which requires much time and cost. In this paper, we present an objective method to evaluate and predict the performance of hearing aid systems without the help of such subject-based tests. In the hearing impairment simulation(HIS) algorithm, a sensorineural hearing impairment medel is established from auditory test data of the impaired subject being simulated. Also, the nonlinear behavior of the loudness recruitment is defined using hearing loss functions generated from the measurements. To transform the natural input sound into the impaired one, a frequency sampling filter is designed. The filter is continuously refreshed with the level-dependent frequency response function provided by the impairment model. To assess the performance, the HIS algorithm was implemented in real-time using a floating-point DSP. Signals processed with the real-time system were presented to normal subjects and their auditory data modified by the system was measured. The sensorineural hearing impairment was simulated and tested. The threshold of hearing and the speech discrimination tests exhibited the efficiency of the system in its use for the hearing impairment simulation. Using the HIS system we evaluated three typical hearing aid algorithms.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.3
• /
• pp.249-257
• /
• 2007

State of problem : The use of zirconium oxide all-ceramic material provides several advantages, including a high flexural strength(>1000MPa) and desirable optical properties, such as shading adaptation to the basic shades and a reduction in the layer thickness. Along with the strength of the materials, the cementation technique is also important to the clinical success of a restoration. Nevertheless, little information is available on the effect of different surface treatments on the bonding of zirconium high-crystalline ceramics and resin luting agents. Purpose : The aim of this study was to test the effects of surface treatments of zirconium on shear bond strengths between bovine teeth and a zirconia ceramic and evaluate differences among cements Material and methods : 54 sound bovine teeth extracted within a 1 months, were used. They were frozen in distilled water. These were rinsed by tap water to confirm that no granulation tissues have left. These were kept refrigerated at $4^{\circ}C$ until tested. Each tooth was placed horizontally at a plastic cylinder (diameter 20mm), and embedded in epoxy resin. Teeth were sectioned with diamond burs to expose dentin and grinded with #600 silicon carbide paper. To make sure there was no enamel left, each was observed under an optical microscope. 54 prefabricated zirconium oxide ceramic copings(Lava, 3M ESPE, USA) were assigned into 3 groups ; control, airborne-abraded with $110{\mu}m$ $Al_2O_3$ and scratched with diamond burs at 4 directions. They were cemented with a seating force of 10 ㎏ per tooth, using resin luting cement(Panavia $F^{(R)}$), resin cement(Superbond $C&B^{(R)}$), and resin modified GI cement(Rely X $Luting^{(R)}$). Those were thermocycled at $5^{\circ}C$ and $55^{\circ}C$ for 5000 cycles with a 30 second dwell time, and then shear bond strength was determined in a universal test machine(Model 4200, Instron Co., Canton, USA). The crosshead speed was 1 mm/min. The result was analyzed with one-way analysis of variance(ANOVA) and the Tukey test at a significance level of P<0.05. Results : Superbond $C&B^{(R)}$ at scratching with diamond burs showed the highest shear bond strength than others (p<.05). For Panavia $F^{(R)}$, groups of scratching and sandblasting showed significantly higher shear bond strength than control group(p<.05). For Rely X $Luting^{(R)}$, only between scratching & control group, significantly different shear bond strength was observed(p<.05). Conclusion : Within the limitation of this study, Superbond $C&B^{(R)}$ showed clinically acceptable shear bond between bovine teeth & zirconia ceramics regardless of surface treatments. For the surface treatment, scratching increased shear bond strength. Increase of shear bond strength by sandblasting with $110{\mu}m$ $Al_2O_3$ was not statistically different.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.351-360
• /
• 2000

The purpose of this study was to evaluate the microleakage of class V compomers according to acid etching treatment and treatment times. Extracted 180 sound human molar teeth were selected then prepared physiologic pulpal pressure far this experiment. In this study class V cavities were prepared on buccal surface with gingival margin located in 1mm superior to CEJ under simulate physiological conditions. These specimens were randomly divided into 6 groups of 30 each and restored following methods : A: Dyract AP + Prime&Bond 2.1 Group 1 : No acid etching, according to manufacturer's instruction. Group 2 : 15 seconds acid etching and same method with Group 1. Group 3 : 30 seconds acid etching and same method with Group 1. B: F2000 groups + Single Bond adhesive Group 1 : No acid etching, according to manufacturer's instruction. Group 2 : 15 seconds acid etching and same method with Group 1 Group 3 : 30 seconds acid etching and same method with Group 1. After 500 thermocycling between $5^{\circ}C\;and\;55^{\circ}C$, the specimens were sealed with glass ionomer and nail varnish then placed in 5% methylene blue dye for 5 hours and rinsed with tab water. The specimens were embedded in orthodontic clear resin, then sectioned buccolingually through the center of restoration with a low speed diamond saw. The dye penetration on each of the specimens were then observed with a stereomicroscope at $\times20$ magnification. The results of this study were statistically analyzed using the indepedent sample t-test and analysis of variance. Results were as follows, 1. In occlusal walls, microleakage were significantly reduced in acid etched group restored with Dyract AP but no statistically significance in F2000 groups. 2. In gingival walls, microleakage were significantly reduced in group 2 restored with Dyract AP, and group 2 and group 3 in F2000 groups. 3. All groups, except group 3 in Dyract AP, showed significantly less microleakage in occlusal wall than gingival wall. 4. No statistical significance were showed between group 2 and group 3 in both materials.

• Environmental and Resource Economics Review
• /
• v.13 no.3
• /
• pp.519-547
• /
• 2004

This paper analyze problems about scope of specific trade obligations(STOs), principle of dispute settlement procedure, and non-parties in context of the Cartagena Protocol on Biosafety(POB), which based on sub-paragraph 31(i) of DDA WTO Ministrial Declaration. The implications based on result of this study are as follows. First, to accept the wider scope of STOs under POB in Korea, importing country, won't be harmful to LMOs and Bioindustry. Instead, it will ensure a high level of biosafety concerning the import of LMOs. Exporters can take different kinds of trade measures to countervail adverse effect on the export of LMOs in this case. Therefore importer will endure the aftereffect. However, if korea were in exporter's place, to accept the wider scope STOs under POB will not have a good influence on the export of LMOs. Korea, therefore, should devise scheme for responding to debate about the STOs in MEAs, which have to be based on cost-benefit analysis and scenarios taking into account of speed and level in biotechology progress, status and trend of LMOs R&D and production, and condition of other industries. Second, it is not easy to agree with applying to what's rule between the POB and WTO for settlement dispute. Because there is the incompatibility between the POB characterized according to social rationality and WTO's rules for safety and environmental protection characterized according to scientific rationality. This issue have to be discussed for long period due to gap like that. Accordingly Korea, one of major LMOs importing countries, should suggest continuously that the effort is needed to ensure an adequate level of protection in transboundary movements of LMOs and scientific, environmental and socio-economic study. Third, in case of dispute between party and non-party of the POB, the duties under the WTO of non-party of the POB(if WTO member country) is valid. The country, therefore, will try to settle dispute based on WTO's rules. However, international society have to ensure for sound and safe use of LMOs in the field of transboundary movements. Accordingly Korea should devise scheme for preventing the possibility of dispute between party and non-party of the POB(if WTO member country), which is supported by policy options under the POB.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.230-236
• /
• 2017

This study was carried out to investigate the effects of ultrasonic thawing on physicochemical characteristics of frozen pork sirloin. To determine the velocity of an ultrasonic thawing machine, $-80^{\circ}C$ frozen pork sirloins were thawed using 132, 580, and 1,000 kHz ultrasonic thawing machines, and the physicochemical properties of pork sirloin thawed with $15^{\circ}C$ tap water and those using the ultrasonic thawing machines were compared. As a result, thawing speed by ultrasonic thawing was three times faster than that of tap water, but drip weight loss rate is increased by about 5% during ultrasonic thawing compared to that during thawing in tap water. However, biochemical properties, such as pH, volatile basic nitrogen, thiobarbituric acid, and total aerobic bacteria, were not improved by ultrasonic thawing. Hunter values, such as total color change and redness, improved slightly after 580 kHz ultrasonic thawing. The hardness and chewiness of the pork sirloin decreased significantly after 580 kHz ultrasonic thawing; however, springiness was not changed. These results indicate that ultrasonic thawing is faster than thawing in tap water, but the physicochemical characteristics of frozen pork sirloin was not significantly improve by ultrasonic sound.

• KDI Journal of Economic Policy
• /
• v.30 no.2
• /
• pp.225-270
• /
• 2008

We analyze macroeconomic consequences of pay-as-you-go (PAYGO) public pension system with a simple overlapping generations model. Contrary to large body of existing literatures offering quantitative results based on simulation study, we take another route by adopting a highly simplified framework in search of qualitatively tractable analytical results. The main contribution of our results lies in providing a sound theoretical foundation that can be utilized in interpreting various quantitative results offered by simulation studies of large scale general equilibrium models. We present a simple overlapping generations model with a defined benefit(DB) PAYGO public pension system as a benchmark case and derive an analytical equilibrium solution utilizing graphical illustration. We also discuss the modifications of the benchmark model required to encompass a defined contribution(DC) public pension system into the basic framework. Comparative statics analysis provides three important implications; First, introduction and expansion of the PAYGO public pension, DB or DC, result in lower level of capital accumulation and higher expected rate of return on the risky asset. Second, it is shown that the progress of population aging is accompanied by lower capital stock due to decrease in both demand and supply of risky asset. Moreover, risk premium for risky asset increases(decreases) as the speed of population aging accelerates(decelerates) so that the possibility of so-called "the great meltdown" of asset market cannot be excluded although the odds are not high. Third, it is most likely that the switch from DB PAYGO to DC PAYGO would result in lower capital stock and higher expected return on the risky asset mainly due to the fact that the young generation regards DC PAYGO pension as another risky asset competing against the risky asset traded in the market. This theoretical prediction coincides with one of the firmly established propositions in empirical literature that the currently dominant form of public pension system has the tendency to crowd out private capital accumulation.

• KDI Journal of Economic Policy
• /
• v.34 no.3
• /
• pp.31-65
• /
• 2012

We study the sustainability of the current fiscal policy of Korea, and the effects of the social welfare policy expansion, which has been recently discussed among the political circles, on the government budget and the generational equity, using generational accounting. We follow the generational accounting approach, considering the fact that most of the social welfare policies are the entitlement programs, which imposes the limitation of the policy maker's discretion to control the cost of their provision. The social welfare expenditure will change due to the change in the policy environments of the future, such as population aging. Therefore, we need to take into account the government cash flow of the future as well as of the present to investigate its effects on the fiscal sustainability, which implies that the national debt or the budget balance is not a proper index for the investigation. Our findings are as follows. The current fiscal policies are not sustainable, and the long-term budgetary imbalance is shown very serious. The required tax adjustment, which is defined as the percentage change of tax burden required to attain the long-term budgetary balance, is very large. Unless the level of the government expenditure is properly controlled, the tax burden and the social contribution level will rise to the untolerable level. Moreover, the expansion of the social welfare policies, which has been discussed among the political circles, will substantially increase the fiscal burden of the future generations. Even though the provision of the free lunch to the primary and the secondary school students, the free child care, and the discounted college tuition do not increase the fiscal burden much, because their magnitude at present is not large and will decrease due to the decrease in the number of the newborns and the students resulting from the fall in the fertility rate, that of the free health care service will increase tax burden of the future generations very much, because the magnitude of the government expenditure needed at present is very large and the population aging will further increase the magnitude of the health care expenditure. The findings indicate that the structural reforms, to prevent the explosive increase in the social welfare expenditure in the future, are necessary before the implementation of the welfare policy expansion. In particular, the cost control of the social transfers to the elderly needs to be made, because the speed of the population aging of Korea is among the highest in the world. The findings also indicate that the budget balance or the national debt can cause the fiscal illusion, which makes the Korean government budget look sound, even though the fiscal policy will rapidly increase the social welfare expenditure in the future, as the population ages. The generational accounting, which takes into account the cash flow of the future as well as of the present, unlike the budgetary balance and the national debt, which shows the results of the government financial activities of the past and the present, is a useful method to overcome the fiscal illusion.