• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.5
• /
• pp.603-609
• /
• 1999

The effect of an external acoustic excitation on the wake structure behind a circular cylinder was experimentally investigated. The sound wave was excited in the frequency range of the shear layer instability and two sound pressure levels of 114 and 120dB were used in this study. As a result, the acoustic excitation modified the wake structure by increasing the velocity fluctuation energy without changing the vortex shedding frequency. The acoustic excitation enhanced the vortex shedding process and promoted the shear layer instability. Consequently, the acoustic excitation reduced the length of the vortex formation region and decreased the base pressure. In addition, the vortex strength of vortices was increased and the width of the wake was spread out due to the acoustic excitation. When the excitation frequency was identical to the shear layer instability frequency, the effect of the external flow control on the cylinder wake was maximized. In addition, with increasing the sound pressure level, the effect of the external acoustic excitation on the wake structure increased.

• The KSFM Journal of Fluid Machinery
• /
• v.1 no.1 s.1
• /
• pp.32-40
• /
• 1998

Aerodynamic performance of a cooling fan of driving motor was enhanced modifying the vane-shroud configuration. Performance of a target model was evaluated to obtain baseline data. The aerodynamic performance and sound pressure level were tested and measured with different numbers of vane of increased length. The tested models show high and stable performance and low values of specific noise level. The long vane-shroud structure induces more stable through flow and decreases the tip leakage flow, which contributes to the increases of performance and efficiency. The sound pressure level increases for the modified model, however, specific noise level decreases.

• Speech Sciences
• /
• v.12 no.3
• /
• pp.125-136
• /
• 2005

Automatic speech recognition is much more difficult in real world. Speech recognition according to SIR (Signal to Interface Ratio) is difficult in situations in which noise of surrounding environment and multi-speaker exists. Therefore, study on main speaker's voice extractions a very important field in speech signal processing in binaural sound. In this paper, we used directional filter and harmonic filter among other existing methods to extract the main speaker's information in binaural sound. The main speaker's voice was extracted using directional filter, and other remaining speaker's information was removed using harmonic filter through main speaker's pitch detection. As a result, voice of the main speaker was enhanced.

• ETRI Journal
• /
• v.39 no.2
• /
• pp.145-150
• /
• 2017

As wearable devices are powered by batteries, they need to consume as little energy as possible. To address this challenge, in this article, we propose a synergistic technique for energy-efficient approximate speech signal processing (ASSP) for wearable devices. More specifically, to enable the efficient trade-off between energy consumption and sound quality, we synergistically integrate an approximate multiplier and a successive approximate register analog-to-digital converter using our enhanced conversion algorithm. The proposed ASSP technique provides ~40% lower energy consumption with ~5% higher sound quality than a traditional one that optimizes only the bit width of SSP.

• Journal of Korea Foundry Society
• /
• v.18 no.3
• /
• pp.262-270
• /
• 1998

Gravity tilt pour casting can effectively guarantee the reduction of various casting defects by controlling the rotation speed and the tilting angle of the mold during tilt pouring. The relationship between casting process parameters and the soundness of castings has been investigated in order to determine the optimum process variables in the gravity tilt pour casting process. In order to evaluate the effect of rotation speed on mold filling patterns, a video camera was employed to visualize the in-situ fluid flow behavior of the molten metal, and the relevant fluid velocity was also estimated. X-ray and mechanical tests were also performed to evaluate the effect of fluid velocity on casting quality. With the rotation speed lower than 0.5 r.p.m., which is nearly corresponding to the critical velocity of stability in the fluid flow, sound castings were obtained without having any casting defects. It can be concluded that the gravity tilt pour casting process is an effective process for manufacturing sound casting products with enhanced physical and mechanical properties.

• Korean journal of applied entomology
• /
• v.50 no.1
• /
• pp.39-46
• /
• 2011

This study analyzed effects of different sound treatments in frequencies and intensities on digestion and immune physiological processes of the beet armyworm, Spodoptera exigua larvae. Without effect on egg hatch, sound treatments with 100-5,000 Hz at 95 dB suppressed feeding behavior and inhibited a digestive enzyme activity. In addition, two dimensional electrophoresis of midgut luminal proteins indicated a marked difference of the sound-treated larvae. In response to 5,000 Hz at 95 dB, larvae showed a significant decrease in hemocyte nodule formation against fungal challenge along with significant suppression in phospholipase $A_2$ activity in hemocyte and plasma. With increase of sound frequencies, the treated larvae showed an enhanced susceptibility to insecticides. Such sound frequency effect was significantly modulated with different sound intensities. These results suggest that sound treatment may give adverse stress to physiological processes of S. exigua larvae and may be applied to a nonchemical insect pest control.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.2
• /
• pp.153-158
• /
• 2011

This paper presents subjective experimental results to understand how audio should be changed when a video clip is watched in 3D than 2D. This paper divided auditory perceptual information into two categories; distance and azimuth that a sound source contributes mostly, and spaciousness that scene or environment contribute mostly. According to the experiment for distance and azimuth, i.e. sound localization, we found that distance and azimuth of sound sources were magnified when heard with 3D than 2D video. This lead us to conclude 3D sound for localization should be designed to have more distance and azimuth than 2D sound. Also we found 3D sound are preferred to be played with not only 3D video clip but also 2D video clip. According to the experiment for spaciousness, we found people prefer sound with more reverberation when they watch 3D video clips than 2D video clips. This can be understood that 3D video provides more spacial information than 2D video. Those subjective experimental results can help audio engineer familiar with 2D audio to create 3D audio, and be fundamental information of future research to make 2D to 3D audio conversion system. Furthermore when designing 3D broadcasting system with limited bandwidth and with 2D TV supportive, we propose to consider transmitting stereoscopic video, audio with enhanced localization, and metadata for TV sets to generate reverberation for spaciousness.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1303-1308
• /
• 2018

A new sintering technique for enhancing a densification and hardness of sintered titanium body by supplying hydrogen was developed (Hydrogen Sintering Process, HSP). The HSP was developed by only injecting hydrogen into an argon atmosphere during the core time. As a result, sound titanium sintered bodies with high density and hardness were obtained by the HSP. In addition, a pore size and number of the HSP specimens were smaller than those of the argon atmosphere specimen. It was found that the injecting hydrogen into the argon atmosphere by HSP can prevent the formation of oxide layers, resulting in enhanced densification and hardness.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.599-602
• /
• 1998

In this paper, a speech enhancement method based on phonemic properties and masking effect is propsoed. It is a modified type of spectral subtraction wherein the spectral sharpening process is exploited in unvoiced state considering the phonemic properties. The masking threshold is used to remove the residual noise. The proposed spectral subtraction shows similar performance as that of the classical spectral subtraction method in view of the SNR. But by the prposed scheme, the unvoiced sound region is shown to exhibit relatively less signal distortion in the enhanced speech.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.241-242
• /
• 2023

This paper discusses an innovative acoustic membrane developed by doAZ Co., Ltd., offering enhanced noise barrier and dust control for urban construction and demolition, surpassing the performance of traditional non-woven fabrics. The membrane is made from recyclable bubble sheets and designed to be seamlessly integrated into single and double-row scaffolding systems, ensuring broader applicability and sustainability.