• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.876-876
• /
• 2001

Axisymmetric finite element model is developed to determine sound propagation characteristics in a circular duct lined with a poroelastic foam. The foam and air models are derived based on the Biot's theory and the Helmholtz equation respectively and finally result in a quadratic eigenvalue problem in the wave number. Some cross sectional mode shapes are shown and sound attenuations and phase speeds of some acoustic modes are given. Those of fundamental modes are compared with those by forced response solutions and those from measurement results. The influence of lining thickness is also described on sound propagation characteristics.

• 한국정밀공학회지
• /
• 제34권4호
• /
• pp.287-292
• /
• 2017

A gas turbine is the main equipment used in a combined heat and power plant. It generates a high sound pressure noise level. To reduce the noise level, an enclosure is installed around the turbine. The sound insulation performance of the enclosure affects the amount of external noise reduction. In this study, a sound transmission loss analysis is performed using the boundary element method to predict sound insulation performance according to the numbers and shapes of the supporter. Radiated noise analysis is also performed for the main external points of the enclosure using ray-acoustics. The results of these analyses are presented and a design plan is proposed that reduces the sound pressure noise level of the enclosure.

• 대한기계학회논문집A
• /
• 제35권12호
• /
• pp.1563-1571
• /
• 2011

본 연구에서는 인간중이의 소리전달특성 계산을 위한 유한요소모델을 개발하였다. 이소골의 형상을 얻기 위하여 한국인 사체에서 추출한 측두골을 마이크로 CT 촬영하여 3 차원 입체모델로 변환하였다. 유한요소모델은 이소골, 고막, 인대와 근육 등을 포함하여 구성하였다. 유한요소모델을 이용하여 고막에서 등골족판까지의 응답함수를 계산한 후 측정값을 갖는 선행연구와 비교하였고 그 결과 10 kHz 주파수 대역까지 소리전달특성을 잘 표현하고 있음을 보였다. 또한 유한요소 모델을 구성하는 주요 물성인자의 변화에 대한 소리전달특성의 변화를 살피고 침등골관절의 강성값이 중이의 소리전달특성에 큰 영향을 미침을 보였다.

• 복식
• /
• 제54권5호
• /
• pp.1-12
• /
• 2004

This Study has examined characteristics of the popular culture of the contemporary fashion show by each element as follows The fashion show place expanded its area when It moved its center because of not only the use of ordinary and public friendly place but also adjacent places post-modernism thought. The installation stage was produced by organic combination with the stage using object: The technology for the stage has produced dynamic variability and variety enough to expand the stage. The dramatic element of production technique was introduced to the fashion show to shorten gap with ordinary life and transfer a theme by facial expressions, gesture and pose. etc of a model In addition. its performance element combines other genre freely to be one time and viewers' participating type technique. At the minimalism element, clothing functions moderately as main factor of the fashion show: Technical elements are added to emphasize future Images. At sound tracks and sound effects, the show's overall atmosphere has been revived to remake various genre of music and improve images. At the fashion model, objective appearance boundary is collapsed to expand model concept and make tools of their own. The fashion show has external values of active movement of associated industry as well as economic boost enough to produce jobs, and internal values to provide aesthetic rest and satisfactions to let the ones. who are isolated from recreation values and the society, establish friendly relations with the society

• 한국소음진동공학회논문집
• /
• 제12권6호
• /
• pp.413-419
• /
• 2002

Noise barriers are widely used to reduce the sound level propagating from highways, railways or factories to residential areas. The reduced noise level at a receiver point is then determined by the diffracted waves around the edge of the barrier as well as by the transmitted waves through the barrier. 1'or proper usage, many studies either theoretical or experimental have been made with the objective of precisely Predicting the acoustic field and improving the noise attenuating properties of barriers. In this study. a simple scattering model. a line acoustic source scattered by an infinite cylinder, is introduced to simply Investigate the sound attenuation efficiency of a sound-resonating barrier. From this model study, it is observed that the sound-resonating harrier can be used as a good sound-shielding element especially for the pure-tone noise generated from the transformer. Large sound-attenuation is achieved by applying the sound-resonating barrier to the large transformers in a substation.

• 한국소음진동공학회논문집
• /
• 제25권8호
• /
• pp.525-531
• /
• 2015

Driving sound is an effective element to promote the product identity of a vehicle by providing customers with attractive sound which reflects the concept of a vehicle. Recently, major automakers are focusing on the target sound setting so that the sound can represent the brand image as well as the unique concept of a vehicle. In this study, a new method of target setting for the driving sound will be introduced based on using formant filter and musical harmonics characteristics. In addition, a target sound suggested from this method will be realized and verified by using active noise control in vehicle.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.659-664
• /
• 2001

Noise barriers are widely used to reduce the sound level propagating from highways, railways or factories to residential areas. The reduced noise level at a receiver point is then determined by the diffracted waves around the edge of the barrier as well as by the transmitted waves through the barrier. For proper usage, many studies either theoretical or experimental have been made with the objective of precisely predicting the acoustic field and improving the noise attenuating properties of barriers. In this study, a simple scattering model, a line acoustic source scattered by an infinite cylinder, is introduced to simply investigate the sound attenuation efficiency of a sound-resonating barrier. From this model study, it is observed that the sound-resonating barrier can be used as a good sound-shielding element especially for the pure-tone noise generated from the transformer. Large sound-attenuation is achieved by applying the sound-resonating barrier to the large transformers in a substation.

• International journal of advanced smart convergence
• /
• 제9권4호
• /
• pp.101-105
• /
• 2020

In this study, we are going to discuss the role of sound, which exists as the background of a movie scene, and the relationship between seeing and hearing. In order to analyze the form in which the scene and sound are matched, the visual content of the image must be analyzed first. In this study, we analyzed Stanley Kubrick's film . Generally, there are both visual and auditory features in the scene of the movie. In some cases, the sound is emphasized more than the scene, and the scene is emphasized more than the sound. In particular, the sound in movies enables a wider imagination and a three-dimensional experience. Images and sounds will have different meanings and effects depending on the purpose of use. By analyzing the correlation between visual scene and auditory sound based on the role sound plays in the film in this study, we would like to confirm that sound is one essential element that has the role of equivalent and independent expression, not the role of assisting images.

• 한국음향학회지
• /
• 제41권6호
• /
• pp.723-729
• /
• 2022

본 논문은 냉장고 기계실 내부 압축기의 저주파 대역에서 소음을 줄이기 위해 다공판을 사용하는 연구이다. 흡음 결과를 예측하기 위해 흡음재의 표면 임피던스를 측정하여, 측정된 임피던스 결과를 이용하여 Finite Element Method(FEM) 분석에 사용된 결과가 실험값과 거의 유사함을 확인하였다. 다공판의 구멍 직경과 배치를 조절하여 냉장고 기계실 내부의 목표 주파수 대역에서 동작할 수 있는 흡음구조를 설계하였다. 기계실에 다공판과 흡음재를 결합한 흡음구조를 적용하여 기존의 흡음재의 주파수 대역보다 낮아진 저주파대역 소음저감 효과를 확인하였다.

• 한국소음진동공학회논문집
• /
• 제13권3호
• /
• pp.180-185
• /
• 2003

The equivalent electroacoustic circuit approach has been conventionally used for the analysis of the multiple layer perforated plate system. However, it is found that an analogy error has been involved in the equivalent electroacoustic approach proposed by previous researchers for the element of straight pipe. Although the pipe between the perforated layers is a distributed element in the analogy, it has been treated as a parallel element by previous investigators. The analogy error is demonstrated by comparing the calculated absorption coefficients based on the parallel circuit and the distributed circuit, respectively, with the measured values by the two-microphone impedance tube method.