• Journal of Oral Medicine and Pain
• /
• 제17권1호
• /
• pp.9-17
• /
• 1992

The purpose of this study was to investigate the characteristics of TMJ sounds by computerized sound power-spectrum analyser(SONOPAK, Bioresearch Inc., U.S.A.). TMJ sounds were recorded and anaylsed in the 87 patients wit TMJ noises by SONOPAK. The followings are the criteria of TMJ sound analysis. 1. It is possible to record the location of the TMJ sound in relation to the opening/closing cycle of mouth. 2. It is possible to record amplitude of sound(loudness) and frequency of sound (Hz) 3. Clicks display a narrow band of sound within the 0-300 Hz range. The peak frequency generally occurs between 50-150 Hz. And crepitus appear as a wide band of sound, occuring from 0-1300Hz. The data obtained from quantitative TMJ sound analysis give lots of information, but further researches are needed.

• KIEAE Journal
• /
• 제9권5호
• /
• pp.63-68
• /
• 2009

As with the disappearance of a living room window due to the trend in apartment housing construction that prefers a larger, expanded living room, the sound insulation performance of the balcony window is becoming an important factor to determine the level of indoor noise at an apartment unit. Considering that the indoor noise inside an apartment unit is mandated by law at or below 45dB(A), the balcony window is increasingly assuming an even more important role. Sound insulation performance of the window was measured by examining differences in data involving varying angles of incidence of the sound source as obtained from the same balcony window. Also, acoustic intensity measuring was performed at and around the window to determine its sound insulation quality. Results of measuring on the sound source's angles of incidence indicated that the performance showed some differences in lower frequency ranges, though with no significance. Intensity measuring results showed that the sound insulation performance was reduced near the connection part of the window and the window frame.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1467-1472
• /
• 2000

This paper describes an investigative study for Fuel Filler Door open sound. Using statistical method of analyzing jury preference data, we extract important factor for subjective feeling and also define sound quality index and sound quality guideline for development of fuel filler system.

• 산업기술연구
• /
• 제20권B호
• /
• pp.9-14
• /
• 2000

Sound insulation performance is investigated on the corrugated panel used for a rail way vehicle. Random incidence sound transmission loss is calculated by using the equivalent orthotropic plate model. Analysis results on several kinds of corrugated panels are in good agreement with the measured data. The analysis method is applied to predict the sound transmission loss of the corrugated panel used for Korean high speed train.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.9-13
• /
• 1993

This paper describes the impact of reflected sound in tunnel. The impact of reflected sound is obtained from making a comparision between measurements of tunnel and bridge. Sound level of tunnel is higher than that of bridge because reflected sound is generated in tunnel. Road traffic noise cannot be freely propagated because there are many buildings in urban. Therefore, a tunnel effect is generated in urban road. The impact of reflected sound is generated not only in tunnel, but also in urban road. This study provides the basic data for tunneling work and noise control strategy in urban road.

• 한국지구과학회지
• /
• 제37권7호
• /
• pp.408-419
• /
• 2016

동해 남서해역 퇴적물의 현장 음파전달속도를 파악하기 위하여 신호투과법을 이용하여 퇴적물의 실험실 음파전달속도를 측정하였다. 측정된 실험실 음파전달속도는 해저면 온도, 해수 음파전달속도, Kim et al. (2004)과 Hamilton (1980) 모델을 적용하여 현장 음파전달속도로 보정하였다. Kim et al. (2004)과 Hamilton (1980)의 현장 음파전달속도는 연구지역 퇴적물 특성을 반영하며, 유사한 분포를 보인다. 현장 음파전달속도 보정에는 해저면 온도의 영향을 크게 받는 것을 확인할 수 있다. 따라서 퇴적물의 실험실 음파전달속도를 통해 현장 음파전달속도를 파악하기 위해서는 해저표층 온도 자료를 통한 온도 보정이 반드시 수행되어야 한다.

• 한국소음진동공학회논문집
• /
• 제19권4호
• /
• pp.335-346
• /
• 2009

As the economy has grown and the main industry in Korea has been changed from secondary industry to tertiary industry, the importance of indoor environment has been a matter of common concern, in which one of the main concerns is to improve the indoor acoustic conditions. However, even though this is required more than before, there are no measures to protect the human being from the noise of electric home appliances. This is owing to the absence of the data about sound power level of electric home appliances. So, we investigate the sound power level of them and analyze the acoustical characteristics of each one. First, we tried to investigate the sound power measurement method of each electric home appliance. After it we test the sound power level of them. From the survey, we can know that the vacuum cleaner is the most noisy electric home appliance, and the refrigerator is the least noisy one. This results will help us predict the indoor noise level using the basic data of sound power level.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권4호
• /
• pp.592-598
• /
• 2015

Stress adversely affects the wellbeing of commercial chickens, and comes with an economic cost to the industry that cannot be ignored. In this paper, we first develop an inexpensive and non-invasive, automatic online-monitoring prototype that uses sound data to notify producers of a stressful situation in a commercial poultry facility. The proposed system is structured hierarchically with three binary-classifier support vector machines. First, it selects an optimal acoustic feature subset from the sound emitted by the laying hens. The detection and classification module detects the stress from changes in the sound and classifies it into subsidiary sound types, such as physical stress from changes in temperature, and mental stress from fear. Finally, an experimental evaluation was performed using real sound data from an audio-surveillance system. The accuracy in detecting stress approached 96.2%, and the classification model was validated, confirming that the average classification accuracy was 96.7%, and that its recall and precision measures were satisfactory.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1985년도 학술발표회 논문집
• /
• pp.68-71
• /
• 1985

In this paper, Sentence-Sip E Il Ka Gi Seo U1 E Gan Da was spoken by 4 men and 3 see sound is used for the experiment. A/D conversion time is 30 sec. Data are obtained using the microcomputer and compressed by ADPCM Rate of compression is 1/8. Data compressed by ADPCM are synthesized and compared to the original sound. Rate of speech identification is analysed using the sound pressure, white noise. Coding of ADPCM is done for 5bit. As the result of fixing starting voltage by 2.6V. It is acertained that variable value increases in initial speech signal and then process is made by minimum value "3". From the result of processing, synthesized sound is almost eaual to original sound. Minimum values cause distorition, Dummy Head System is used in this experiment.xperiment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.580-586
• /
• 2005

In this study, experimental tests for driving noise of various optical disk drives (ODD) have been performed using 1/2' microphone noise measurement system. Several new and old ODD models by different manufacturers are practically considered and compared far realistic driving conditions. Sound insulation case with absorbing material fur the present experimental tests is designed and constructed using CATIA system. It is found that average data transfer rate, operating RPM, and sound noise level seems to be different for the same opposed speed ODD by different manufacturers. Moreover, driving sound noise level can be largely affected by both tray shape and driving speed even for the same apparent data transfer rate.