• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.38-46
• /
• 2010

For the development of 100[W] stage lighting, quantitative and uniform color mixing that applied through color adopted Simple-Inverse matching so that color mixing can be possible along Black Body Locus. R,G,B(Red, Green, Blue) LED(Light Emitting Diode) arrangement through LED package character analysis, LED module, and the characteristic of device were considered for uniform color mixing. A distance changeable optical device was built to assure high uniformity and high diffusion of not only the middle of diffusion side but also the border side. Also, we developed the control power circuit that can expand up to 6 channels which are possible for quantitative color mixing, and the high uniformity and high quantified border light for color mixing control and the verification of color mixing characteristics by composing GUI(Graphical user interface) including color mixing simulator. By presenting the experimental results of light color control, we proved the usefulness of our developed border light and the proposed color mixing method.

• Journal of the Korea Furniture Society
• /
• v.25 no.4
• /
• pp.239-249
• /
• 2014

Color is an important subject of interest for cognitive developmental stages of children and it also correlate to emotional and physical development. Children can acquire concept of color by 'play'. Color play can be experienced to children through diversity activity and theses activities contain creative craft art activity. The color-paly with art activity for kids can be called 'kids color-design play'. Recently, indoor playgrounds are rapidly grow-up because parent's concern degree that about play activity get higher. The indoor playground being enlargement and it contains various paly contents. Color-design play is also enacted animatedly in kids indoor playground. The great part of color-design plays are enacted through program that needs teaching. On the other hand, color-design play facility that children can play spontaneously is not composed sufficiently. Therefore this study aim at design proposal of 'Kids color-design playground apparatus' in indoor playground.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.131-134
• /
• 2009

The red-eye effect in photography occurs when using a photographic flash very close to the camera lens, in ambient low light due to in experience. Once occurred, the photographer needs to remove it with image tool that requires time consuming, skillful process. In this paper, we propose a new method to extract and remove such red-eye area automatically. Our method starts with transforming ROB space to YCbCr and HSI space and it extracts the face area by using skin color information. The target red-eye area is then extracted by applying 8-direction contour tracking algorithm and removed. The experiment shows our method's effectiveness.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.85-88
• /
• 2007

A number of R, G and B LEDs for reference color temperature mixing ratio of RGB was determined by the theory of RGB mixing as a baseline. Once the number of LEDs was determined the objective color temperature from baseline has been achieved by the control the RGB duty ratio. And a practical prototype of 50W floodlighting adjusted by the above algorithm. The micro controller was developed with control algorithm for RGB duty ratio to obtain the objective color temperature. Detailed experiments to optimize algorithm of duty ratio and color temperature will be discussed in this paper as well.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.72-73
• /
• 2005

In this paper, the simulation of the n-p-n-p layer stacked color detector is presented. A color detector based on vertically integrated structures of silicon can overcome color moire or color aliasing effect. The color detector is designed to separate the fundamental chromatic components at each junction and exhibits maxima of the spectral sensitivity at red, green, and blue region, respectively. From this result, it is observed that the spectral response can be controlled by the doping concentration and structure of the devices.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.108-111
• /
• 2005

The Communication Ocean, Meteorological Satellite (COMS) as the one of the national space program has been developed by Korea Aerospace Research Institute (KARl). The Geostationary Ocean Color Imager (GOCI) is one of the main payloads ofCOMS which will provide consistent monitoring of ocean-colour around the Korean Peninsula from geostationary platforms. The ocean color observation from geostationary platform is required to remedy the coverage constraints imposed by polar orbiting platforms. In this paper the main characteristics of GOCI are described and compared with the current ocean color sensors. The GOCI will provide the measurement data of 6 visible channels and 2 nearinfrared channels (40Onm - 900nm). The high radiometric sensitivity is essential of ocean color sensor because of the weak water leaving radiance.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.121-133
• /
• 2007

The CMS(color management system) software was to enable consistent color reproduction from original to reproduction. The CMS was to create RGB monitor and printer characterization profiles and then use the profiles for device independent color transformation. The implemented CMM(color management module) used the CIELAB color space for the profile connection. Various monitor characterization model was evaluated for proper color transformation. To construct output device profile, SLI(sequential linear interpolation) method was used for the color conversion from CMYK device color to device independent CIELAB color space and tetrahedral interpolation method was used for backward transformation. UCR(under color removal) based black generation algorithm was used to construct CIELAB to CMYK LUT(lookup table). When transforming the CIE Lab colour space to CMYK, it was possible to involve the gray revision method regularized in the brightness into colour transformation process and optimize the colour transformation by black generation method based on UCR technique. For soft copy colour proofing, evaluating several monitor specialism methods showed that LUT algorithm was useful. And it was possible to simplify colour gamut mapping by constructing both the look-up table and the colour gamut mapping algorithm to a reference table.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.4
• /
• pp.272-280
• /
• 2015

This paper proposes color databases that can be used for various purposes for people with a color vision deficiency (CVD). The purpose of this paper is to group colors within the sRGB gamut into the CIE $L^*a^*b^*$ color space using the Brettel algorithm to simulate the representative colors of each group into colors visible to people with a CVD, and to establish a confusion line database by comparing colors that might cause confusion for people with different types of color vision deficiency. The validity of the established confusion lines were verified by using an Ishihara chart. The different colors that confuse those with a CVD in an Ishihara chart are located in the same confusion line database for both protanopia and deutanopia. Instead of the 3D RGB color space, we have grouped confusion colors to the CIE $L^*a^*b^*$ space coordinates in a more distinctive and intuitive manner, and can establish a database of colors that can be perceived by people with a CVD more accurately. Editor - Highlight - Do these changes reflect the intended meaning? If not, please rephrase as intended.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.9
• /
• pp.577-579
• /
• 2005

In this study, the automatic tracking algorithm tracing a human face is proposed by using YCbCr color coordinated information and its thermal properties expressed in terms of thermal indexes in an infra-red image. The facial candidates are separately estimated in CbCr color and infra-red domain, respectively with applying the morphological image processing operations and the geometrical shape measures for fitting the elliptical features of a human face. The identification of a true face is accomplished by logical 'AND' operation between the refined image in CbCr color and infra-red domain.

• Journal of the Korean Ceramic Society
• /
• v.49 no.3
• /
• pp.221-225
• /
• 2012

It is possible to enhance the color of the natural diamond with a high pressure high temperature(HPHT) process. We employed a pyrophyllite tube cell and cubic press apparatus for HPHT treatment on the brown colored Type II (5.6 GPa/ $1700^{\circ}C$/ 52 min), and Type I aB(5.6 GPa/ $1650^{\circ}C$/ 30 min) diamond samples. We investigated the microstructure, Types, fluorescence, properties of the diamonds with an optical microscopy, FT-IR, photoluminescence(PL) spectroscopy, Diamond-View, and micro-Raman spectroscopy. Two tinted brown diamonds changed into colorless just after the HPHT process. Optical microscopy showed that no crack and significant inclusion evolution occurred during the HPHT process except the small graphite spot appeared in Type I aB sample. FTIR spectrum confirmed that no Type, amber center, and platelet defect change with the HPHT treatment. Diamond-View could not distinguish the HPHT treated diamonds from the naturals. PL spectroscopy showed that N3 and H3 color centers remained even after HPHT process. Consequently, we successfully changed the color of diamonds into colorless by 5.6 GPa HPHT process.