• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.67-72
• /
• 2011

Solvent-free paint is sprayed from higher-pressure conditions, because the viscosity is large. The hydraulic actuator which can be operated under higher-pressure condition is required to spray solvent-free paints in painting process for the environmental protection. The purpose of this paper is to develop the hydraulic actuator under higher-pressure conditions for solvent-free paint spraying system. The hydraulic actuator consists of inner spool, outer spool and ball. The analysis of a structural stability was conducted by using ANSYS V11 under the design condition of upward and downward movement of spool. As a result, the maximum von-Mises stress applied on spool under 4mm displacement showed a value of 106MPa which was greater than the allowable stress of the spool with a value of 250MPa and a value of safety factor 3. This result suggested that the spool system be unstable under the design condition so that it was necessary for the spool system to be reinforced to secure the structural stability.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.61-66
• /
• 2011

The purpose of this paper is to design a hydraulic actuator to operate under high pressure conditions. The flow characteristics under design conditions of hydraulic actuator were numerically conducted by commercial fluid dynamic code(ANSYS CFX V11). The numerical analysis was performed by transient technique according to the variation of stroke times, which was changed from 0 to 1 second by interval of 0.01. Turbulence model, $k-\omega$ SST was selected to secure more accurate prediction of hydraulic oil flow. The ICEM-CFD 11 and CFXMesher, reliable grid generation software was also adapted to secure high quality grid necessary for the reliable analysis. According to the simulation results, the flow rate which was supplied to the hydraulic actuator was 30.4l/min. These results are in good agreement with design results within 3.5% error.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권5호
• /
• pp.519-525
• /
• 2005

An electrochemical evaluation on the corrosion resistance for heavy anticorrosive paint(DFT:25um) was carried out for 5 kinds of heavy anticorrosive paints such as high solid epoxy(HE), solvent free epoxy(SE). tar epoxy(TE), phenol epoxy(PE). and ceramic epoxy(CE). Corrosion current densities obtained by Tafel extrapolation method from anodic and cathodic polarization curves didn't correspond with the values obtained by AC impedance measurement, however, the values of polarization resistance obtained from the cyclic voltammogram showed a good tendency corresponding well with the values of AC impedance measurement. Futhermore there was a good correlation against the corrosion resistance evaluation between passivity current density of the anodic polarization curve and diffusion limiting current density of the cathodic polarization curve. And corrosion resistance increased with corrosion potential shifting to noble direction. From the results discussed above. HE and CE had a relatively good corrosion resistance than other heavy anticorrosive paints.

• 공업화학
• /
• 제24권2호
• /
• pp.171-176
• /
• 2013

지구온난화 문제가 대두되면서 volatile organic compound (VOC) free 도료의 필요성이 크게 증가하고 있다. 현재 국내외적으로 사용되고 있는 도료의 약 70~80% 정도가 용매형 도료이다. 따라서 지구온난화 문제의 근본적인 해결을 위해서는 도료의 희석제로 사용되고 있는 용매인 휘발성 유기화합물(VOCs)의 배출을 최소화 할 수 있는 무용제형도료의 개발이 필수적이다. 본 연구에서는 무용제도료를 개발하기 위하여 기존의 페놀수지의 특성인 산성화로 인해 도료로 사용 시 부착성이 떨어지는 단점을 보완하기 위해 아크릴계 단량체들을 첨가하였다. 합성한 페놀수지와 PF/PMMA 블렌드 수지와 PF/PHEMA 블렌드 수지의 구조분석결과 블렌드된 형태를 확인하였고 접착인장강도실험을 통해 PF/PMMA 블렌드 수지가 2.818 Mpa의 값으로 도료시스템에 적용 가능성을 확인하였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.42-45
• /
• 2003

Polyurethane(PU) products are generally used in the automobile, paint, furniture, adhesive, the medical and textile industries. Recently, the increasing acceptance of waterborne polyurethane (WBPU) Is motivated by more stringent environmental requirements, such as the reduction of solvent emissions into the atmosphere [1]. The application for textiles includes suede processing, soft-hand processing, wrinkle-free processing, antistatic processing, sizing and adhesives. (omitted)

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.66-72
• /
• 2013

The demand for an ice class ship is rising expected to rise according to the increase of energy consumption and the opening of arctic sea routes. Ice class ship should be designed to cope with the severe environmental conditions of arctic sea such as a high mechanical impact and abrasion damage, caused by pack ice, ice bergs and low temperature. The ice class ship hulls are coated with an anti-abrasion and low friction coating such as a solvent free epoxy or high solid-volume epoxy. These coatings require two-component heating pump and a high grade surface preparation. In this study, the coating performances for the arctic vessels, such as puncture absorbed energy, abrasive wear loss, friction coefficients and impact absorbed energy were evaluated. Based on this study, a proper coating performance specification for the arctic vessels was proposed and coating selection guideline in terms of coating performance and workability was also established.

• 환경생물
• /
• 제26권2호
• /
• pp.102-108
• /
• 2008

방오도료로 많이 쓰인 유기주석화합물은 일반생물에게 미치는 독성이 매우 강하고 또한 내분비계 장애물질임이 밝혀지면서 이를 대체할 화합물들의 개발이 요구되고 있다. 그 가운데 이런 목적으로 만들어진 화합물인 Sea-Nine 211을 사용하여 이것이 해양생물 특히 저서생물인 패류에게 얼마나 영향을 미치는지를 살펴보고자 북방대합(P. sachalinensis)에게 강제 주사하여 생존율과 중장선의 미크로좀 중 I상 약물대사효소의 변화를 4일째가지 조사하였으며, 또한 비교를 위해 tributyltin chloride (TBTC)의 주사실험을 병행하였다. 생존율에서는 sham구나 Sea-Nine 211 실험구(5, 25 및 50 mg kg$^{-1}$)모두 생존하였으나 TBTC(1, 2 및 5 mg kg$^{-1}$) 실험구의 생존율은 4일째에 각각 70%, 30% 및 0%였다. 한편, 약물대사효소계 중 I상효소인 CYP는 Sea-Nine 211주사 후 시간이 지나면서 유도되었지만, TBTC는 반대로 저해되는 경향을 보였다. 그리고 P450R 활성은 Sea-Nine 211 실험구에서 시간 경과와 더불어 약간 증가하는 추세를 보였지만 sham구와는 유의적인 차이가 없었으나, TBTC실험구는 주사농도와 비례하면서 저해되었다. b5R활성도 마찬가지로 Sea-Nine 211 실험구는 큰 변화가 없었으나, TBTC실험 구에서는 유의적으로 저해되는 경향을 관찰할 수가 있었다. 이처럼 비주석계 방오도료 화합물인 Sea-Nine 211은 북방대합에 대한 독성이 TBTC에 비해 크게 낮았으며, 약물대사효소계에 미치는 영향도 TBTC는 저해하는데 반해서 P450R이나 b5R에는 별다른 변화를 일으키지 않았으나 CYP는 유도하였다.

• 환경생물
• /
• 제26권2호
• /
• pp.109-114
• /
• 2008

방오도료로 많이 쓰이던 유기주석화합물은 일반생물에게 미치는 독성이 매우 강하고 또한 내분비계 장애물질임이 밝혀지면서 이를 대체할 화합물들이 개발되고 있다. 그 가운데 본 연구에서는 Sea-Nine 211(4,5-dichlore-2-n-octyl-3(2H) isothiazolone)을 사용하여 이 화합물이 해양생물 특히 저서생물인 패류에게 얼마나 영향을 미치는지를 살펴보았다. 이를 위해 강원도 북부 해역에 주로 서식하는 북방대합(Pseudocardium sachalinensis)에게 Sea-Nine 211을 강제적으로 주사하여 alkoxyresorufin 탈알킬화효소인 EROD와 MROD의 활성 변화를 4일째까지 조사하였고, 비교를 위해서 tributyltin chloride (TBTC)도 사용하였다. 그 결과, CYP1A1의 지표효소인 EROD활성은 Sea-Nine 211 및 TBTC주사구 모두 sham구와 차이가 없었지만, CYP1A2의 지표효소인 MROD활성은 Sea-Nine 211 주사구가 sham구에 비해 유의적으로 높았으므로 Sea-Nine 211에 의해 유도된 것이라 여겨진다. 이것은 북방대합에도 CYP1A2가 존재할 수 있음을 보여준다.

• Journal of the Korean Wood Science and Technology
• /
• 제50권3호
• /
• pp.149-158
• /
• 2022

To realize the infinite possibilities of materials derived from wood, it is necessary to overcome the weak moisture stability of wood. Thus, the development of an eco-friendly hydrophobic coating agent is essential, and of these, woody biomass-based materials are strongly attractive as coatings. In this study, eco-friendly hydrophobic wood coatings were prepared using carnauba wax purified from palm leaves and sprouts, and kraft lignin. The physicochemical properties of the carnauba wax/lignin blends according to the ratio of carnauba wax and lignin were observed by morphology and functional group change. In addition, the coating performance of carnauba wax/lignin blend coatings was confirmed by measuring the contact angle change. It was found that the addition of lignin could accelerate the atomization of wax particles, and that micro-roughness can be realized when applied to the actual wood surface, to ensure that the coating effect over time lasts longer. In addition, it was confirmed that the addition of lignin increases the hydrogen-bond-based interaction with the wood of the coating, thereby providing better coating stability and increasing the durability of the coating solvent under friction. The carnauba wax/lignin paint developed in this way is eco-friendly because all components are made of wood-based raw materials and have an excellent affinity with wood surfaces. Therefore, it is expected to be applicable to the coating process of wood-plastic composites and timber composites.