• Membrane Journal
• /
• v.9 no.3
• /
• pp.151-156
• /
• 1999

Silicone was used in this study to enhance the oxygene permeability of gas separation membranes. PMP and PMMA were used to prepare the copolymers and IPN membranes, respectively. In the case of copolymers, there were two methodsCswelling and solvent evaporation) in this study and it was revealed that this preparation method affected the oxygene permeability. It was also shown that the IPN method brought the enhacement of oxygen permeability and slight decrease of separation factor. Regarding oxygen permeability 10 wt% of PMMA was the best composition of IPN membrane.

• Journal of Environmental Impact Assessment
• /
• v.11 no.3
• /
• pp.173-187
• /
• 2002

토양 속에서 발생될 수 있는 용질과 용매의 복합 수송시스템을 대상으로 한 연구 중 회석상태로부터 포화상태에 이르기까지의 넓은 농도분포를 가지는 토양 용액에 적용될 수 있는 물리 화학적 이론에 입각한 지배방정식을 발표한 연구는 전무한 실정이다. 본 연구는 용매와 토양기체간 그리고 용질과 결정간의 상변화를 고려한 연립물질수지방정식을 제시하고, 여기에 타율적 대류를 포함하는 상호확산 분산수송방정식을 도입하여 대류와 확산에 관한 프럭스를 분리, 결정하는 것을 목적으로 한다. 대류 플럭스의 결정은 타율적으로 이루어지는 것이 이론적으로 타당하며, 이러한 타율적 대류 플럭스가 제공된다면 본 연구에서 제시된 지배방정식을 이용해서 토양용액의 복합수송 시스템을 범용적으로 해석, 예측할 수 있을 것으로 판단된다.

• Microbiology and Biotechnology Letters
• /
• v.27 no.2
• /
• pp.159-165
• /
• 1999

Pseudomonas aeruginosa JRT-4 strain was used as a biosurfactant-producing microorganism in this study. It was one of the microorganisms isolated from the sewage sludge, the main and branch streams of Han river. The surface tension of the culture broth of P. aeruginosa JRT-4 decreased to 30mN/m. The crude biosurfactant was obtained from the culture broth by acid precipitation, solvent extraction, evaporation, and freeze drying. The CMC value of the crude biosurfactant was 0.006%(w/v). From analysis of the chemical structure of biosurfactant, it was determined as rhamnolipid 1 and 3 structures by FAB mass spectrometer. In the washing test for artificially contaminated textiles, the biosurfactant showed better bleachness than the two chemically synthesized surfactant, LAS and SLES. Finally, the biodegradation and ecotoxidolorical tests showed that the biosurfactant was readily biodegradable in the environment and a mild material for microorganisms and green algae.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.83-90
• /
• 1999

A cellulose acetate membrane containing silver nitrate was prepared by gelatinizing in water at $2^{\circ}C$ after evaporating solvent from the casting solution on a glass plate. Permeation experiments for oxygen and nitrogen were conducted in the ranges of temperature, $5-40^{\circ}C$ and pressure difference, $1-5kg/cm^2$ in order to investigate the effects of temperature and pressure difference on permeation characteristics of the membrane. When the evaporation time was increased, the permeability of oxygen decreased but the separation factor of oxygen against nitrogen increased since a more dense layer was formed on the membrane surface. When the silver nitrate was added, the permeation flux was doubled and the separation factor was improved from 3.0 to 3.3. This implies that silver nitrate acts as an oxygen carrier in the membrane.

• Korean Membrane Journal
• /
• v.1 no.1
• /
• pp.50-58
• /
• 1999

Symmetric asymmetric and composite perfluoropolymer membranes made with HYFLON AD have been prepared and evaluated. Porous and non porous symmetric membranes have been prepared by solvent evaporation with various processing conditions. Non-contact atomic force microscopy (AFM) was used to investigate the membrane morphology in air. Analysis of the images gave quantitative imformation on the surface pore strcture in particular on the pore size distributin. Possible useful uses of porous membranes are envisaged in the field of gas-liquid separations such as membrane contactors (MSc) Molecular Dynamics(MD) simulations structure of HYFLON AD 60X copolymer supporting these results are also reported. Amorphous perfluoropolymer membranes appears to be ideal other than in MCs when separation processes have to be performed in hostile environments i.e. high temperatures and aggressive non-aqueous media such as chemicals and solvents. In these cases HYFLON AD mem-branes can exploit the outstanding resistance of perfluoropolymers.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.4
• /
• pp.479-485
• /
• 1996

Volatile organic compounds are air pollutants exhausting from industrial process, evaporation of solvent, and so on. Most of VOCs are the combustible gas of low calorific value as it is diluted by air. The systems burning such a hazardous gas need to increase enthalpy in order to increase flame stability. In this study an incinerator with reciprocating flow in the honeycomb ceramic has been used for the experiment of VOCs control. By the reciprocating flow system, the enthalpy of combustion gas is effectively regenerated into the enthalpy increases of the combustible gas through the honeycomb ceramic, which provides a heat storage. The position of the reaction zone is strongly dependent on the parameters of mixture velocity and time frequency. Flame front is changed to the point where burning velocity is coincided with burning velocity in the honeycomb ceramic. In this system it is important that flame front should be located symmetrically at the center of honeycomb ceramic for the purpose of increasing the reaction rate at one point. Peak temperature becomes higher with decreasing time frequency, at which the flow direction is regularly reversed.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.1
• /
• pp.13-22
• /
• 1996

Poly(D,L-lactic acid) (PLA) microspheres containing alprazolam(APZ) were prepared by a solvent-emulsion evaporation method and their release patterns were investigated in vitro. Various batches of microspheres with different size and drug content were obtained by changing the ratio of APZ to PLA, PLA concentration in the dispersed phase and stirring rate. Rod-like APZ crystals on microsphere surface, which were released rapidly and could act as a loading dose, were observed with increasing drug content. The release rate was increased with increase in drug contents and decrease in the molecular weight of PLA. The release rate of APZ for long-acting injectable delivery system in vitro, which would aid in predicting in vitro release profile, could be controlled by properly optimizing various factors affecting characteristics of microspheres.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1345-1350
• /
• 2003

Principal component analysis based two-dimensional (PCA-2D) correlation analysis is applied to FTIR spectra of polystyrene/methyl ethyl ketone/toluene solution mixture during the solvent evaporation. Substantial amount of artificial noise were added to the experimental data to demonstrate the practical noise-suppressing benefit of PCA-2D technique. 2D correlation analysis of the reconstructed data matrix from PCA loading vectors and scores successfully extracted only the most important features of synchronicity and asynchronicity without interference from noise or insignificant minor components. 2D correlation spectra constructed with only one principal component yield strictly synchronous response with no discernible a asynchronous features, while those involving at least two or more principal components generated meaningful asynchronous 2D correlation spectra. Deliberate manipulation of the rank of the reconstructed data matrix, by choosing the appropriate number and type of PCs, yields potentially more refined 2D correlation spectra.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.87-89
• /
• 2003

Thermoplastic polyurethane(PU)-based blend membranes were prepared by the solvent evaporation process. The gas sorption, diffusion, and permeation properties of PU-based blend membranes have been studied. The morphology of PU-based blend membranes was investigated by SEM. The result showed that phase separation occurred with increasing blend ratio. $CO_2$ permeation behaviors of blend membranes were affect by blend composition. Thermoplastic polyurethane(PU)-based membranes showed high $CO_2$ permeation and $CO_2$/$N_2$ selectivity of the blend membrane was improved with increasing the blend ratio.

• Journal of Powder Materials
• /
• v.30 no.1
• /
• pp.47-52
• /
• 2023

The purpose of this study is to develop and evaluate amorphous spray-dried microparticles (SDM) containing levosulpiride to increase its solubility. SDM are prepared via solvent evaporation using polyvinylpyrrolidone (PVP) as the water-soluble polymer and Cremophor RH40 as the surfactant. The SDM is prepared by varying the amounts of PVP and Cremophor RH40, and its physicochemical properties, solubility, and dissolution are confirmed. All levosulpiride-loaded SDMs converted the crystalline drug into an amorphous form, significantly improving drug solubility and dissolution compared with the drug alone. SDM consisting of drug/PVP/Cremophor RH40 in a weight ratio of 5:10:3, with increased solubility (720 ± 36 vs. 1822 ± 51 ㎍/mL) and dissolution rate (10.3 ± 2.2 vs. 92.6 ± 6.0%) compared with drug alone, shows potential as a commercial drug for improved oral bioavailability of levosulpiride.