• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2212-2216
• /
• 2011

An ionic liquid-based ultrasonic-assisted extraction method has been successfully applied to the effective extraction of phenolic compounds from Laminaria japonica Aresch. Three kinds of 1-alkyl-3-methyl-imidazolium with different cations and anions were evaluated for extraction efficiency. The results showed that both the characteristics of anions and cations have remarkable effects on the extraction efficiency. In addition, the ionic liquid-based ultrasonic-assisted extraction procedure was also optimized on some extraction parameters, such as ultrasonic power, extraction time and solid-liquid ratio. Compared with the conventional solvent, the optimum approach gained the highest extraction efficiency within the shortest extraction time. Average recoveries of phenolic compounds were from 75.5% to 88.3% at three concentration levels.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.04a
• /
• pp.25-27
• /
• 1993

Multiphase equilibrium-based processes for separation and purification generally utilize dispersed systems in which one phase is dispersed in the other as bubbles or drops or thin films. Using microporous membranes, novel techniques have been developed such that multiphase processes can now be carried out in a nondispersive fashion for gas-liquid (Sirkar, 1992) and liquid-liquid (Prasad and Sirkar, 1992) contacting processes. Among such processes, only nondispersive solvent extraction of pollutants using microporous membranes will be of concern here. These processes employ immobilized immiscible phase interfaces at the pore mouths in a microporous membrane. Through such interfaces, solutes are extracted into the solvent as two immiscible phases flow on two sides of a microporous membrane. Many advantages of such a technique over conventional dispersion-based extractors have been summarized (Prasad and Sirkar, 1992).

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.6
• /
• pp.386-394
• /
• 2001

Carboxylic acids are examples of compounds with wide industrial applications and high potential, This article presents the principles of reactive extraction along with the character-istics of tertiary amine extractants, while is given on considering the effect of the amine class and chain length, As such a brief overview the current research on reactive extraction, including the recovery of citric acid, selective amine-based extraction , and extractive fermentation is given. When discussing extractive fermentation strategies for reducing solvent toxicity are also suggested based on specific examples. Finally, solvent regeneration and stripping of extracted acid explained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.320-320
• /
• 2010

The dye-sensitized solar cells (DSSCs) have achieved so far the highest validated efficiency over 11%. However, the cells with the best performance utilize volatile solvent as a electrolyte, which can cause some practical limitations for the long-term operation. This is one of the most substantial problems to be resolved for the commercialization of DSSCs. In order to improve the long-term stability, many research groups have reported new electrolyte system, to replace the liquid type electrolyte by non-volatile ones. In this work, we studied long-term stability of the DSSCs with various types of electrolytes such as (PVDF HFP) based polymer, eutectic melts of ionic liquids, and liquid based solvent. The cells with various electrolytes have been exposed to the condition under thermal stress and illumination over 1000 hours. We will report the change of photovoltaic properties with time and investigate the degradation mechanism with the impedance spectroscopic analysis.

• Resources Recycling
• /
• v.11 no.6
• /
• pp.38-46
• /
• 2002

Fundamental investigations were conducted far the recovery process of waste organic solvent by fractional distillation in the aspects of equilibrium and kinetics. Mixture of toluene and xylene, which were both being used in the largest amount as industrial organic solvent, was taken as the artificial waste organic solvent and their distillation behaviors were studied. The purity of recovered solvent was investigated by Cir Chromatography and shown to be in the range of 94～98%. Based upon equilibrium calculations, the changes in the Gibbs free energy, standard enthalpy, and standard entropy for distillation reaction have been estimated. The standard enthalpy changes for toluene and xylene were shown to be 44.833 and 47.044 kJ $mol^{-1}$ respectively, which were similar to their molar heats of evaporation. The activation energies of distillation fur toluene and xylene obtained from kinetic studies were 3.281 and 2.699 kJ $mol^{-1}$ and they were about one tenths of the standard enthalpy changes of distillation reaction. The highness of the purity of recovered organic solvents suggested the possibility that the recovered waste organic sol-vent could partly replace the original solvent.

• Toxicological Research
• /
• v.34 no.2
• /
• pp.111-125
• /
• 2018

Solvents can be used in the manufacture of medicinal products provided their residual levels in the final product comply with the acceptable limits based on safety data. At worldwide level, these limits are set by the "Guideline Q3C (R6) on impurities: guideline for residual solvents" issued by the ICH. Diisopropyl ether (DIPE) is a widely used solvent but the possibility of using it in the pharmaceutical manufacture is uncertain because the ICH Q3C guideline includes it in the group of solvents for which "no adequate toxicological data on which to base a Permitted Daily Exposure (PDE) was found". We performed a risk assessment of DIPE based on available toxicological data, after carefully assessing their reliability using the Klimisch score approach. We found sufficiently reliable studies investigating subchronic, developmental, neurological toxicity and carcinogenicity in rats and genotoxicity in vitro. Recent studies also investigated a wide array of toxic effects of gasoline/DIPE mixtures as compared to gasoline alone, thus allowing identifying the effects of DIPE itself. These data allowed a comprehensive toxicological evaluation of DIPE. The main target organs of DIPE toxicity were liver and kidney. DIPE was not teratogen and had no genotoxic effects, either in vitro or in vivo. However, it appeared to increase the number of malignant tumors in rats. Therefore, DIPE could be considered as a non-genotoxic animal carcinogen and a PDE of 0.98 mg/day was calculated based on the lowest No Observed Effect Level (NOEL) value of $356mg/m^3$ (corresponding to 49 mg/kg/day) for maternal toxicity in developmental rat toxicity study. In a worst-case scenario, using an exceedingly high daily dose of 10 g/day, allowed DIPE concentration in pharmaceutical substances would be 98 ppm, which is in the range of concentration limits for ICH Q3C guideline class 2 solvents. This result might be considered for regulatory decisions.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.15-37
• /
• 2013

Split digital printing into interior and outdoors on present advertisement. When is printing machine for interior mainly, use ink of water-based type. Equipment of this type embodies high resolution, but ink special quality light stability is weak. Also, when is printing machine for outdoors, printing machines of solvent or UV type are used because of water resistance and light stability. This printing machines hard to embody ink special quality high resolution mainly. And because outside is far visibility range, is uncommon in case high resolution requires embodiment. Therefore, high resolution of inside is water-based type considering this item and outside printing machine of low resolution solvent type mainly announce. Also, divide into eco-friendly latex ink type that is announced to water-based, solvent, UV according to ink type and the latest market using in occasion of digital printing machine used as advertisement industry. Color management that is been consistent of original image has a lot of difficulties by using substrate that is also various to digital printing machine for such various advertisement. But, consumers is rising realization about color or desire about quality improvement of color gradually in interior outside advertisement market. So, require solution method. Therefore, in this paper, eco-friendly ink use applied device calibration through linearization in done latex digital printing machine to basis. And studied right color management plan of digital printing for interior outside advertisement through three steps such as G7 calibration application and ICC profile application.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.829-835
• /
• 2011

A dispersive liquid-liquid microextraction based on solidification of floating organic droplet (DLLME-SFO) has been developed as a new approach for the extraction of trace copper in water and beverage samples followed by the determination with flame atomic absorption spectrometry. In the DLLME-SFO, 8-hydroxy quinoline, 1-dodecanol, and methanol were used as chelating agent, extraction solvent and dispersive solvent, respectively. The experimental parameters related to the DLLME-SFO such as the type and volume of the extraction and dispersive solvent, extraction time, sample volume, the concentration of chelating agent and salt addition were investigated and optimized. Under the optimum conditions, the enrichment factor for copper was 122. The method was linear in the range from 0.5 to $300\;ng\;mL^{-1}$ of copper in the samples with a correlation coefficient (r) of 0.9996 and a limit of detection of $0.1\;ng\;mL^{-1}$. The method was applied to the determination of copper in water and beverage samples. The recoveries for the spiked water and beverage samples at the copper concentration levels of 5.0 and $10.0\;ng\;mL^{-1}$ were in the range between 92.0% and 108.0%. The relative standard deviations (RSD) varied from 3.0% to 5.6%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.4
• /
• pp.139-144
• /
• 2023

Stone papers made of inorganic filler and plastic polymer do not use pulp, which is the main raw material of existing papers, so they contribute to the preservation of nature and can be used as more eco-friendly materials when they have biodegradability. Since most stone papers are manufactured by hot extrusion, the amount of ceramic fillers and related physical properties are limited to control manufacturing workability. In this study, the stone paper composition was prepared in a liquid form using solvents, so that there was little limitation on the amount of ceramic filler added and it was also easy to add additives to control biodegradability. They were fabricated from eco-friendly raw materials using waste oyster shells as an inorganic filler and (recyclable) PVC materials as an organic binder. After making a solution using common solvents for PVC, inorganic filler and cellulose to impart biodegradability were mixed and processed into sheets to prepare solvent-based stone papers, and their paper properties were evaluated.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.542-554
• /
• 2023

This study is a continuation of our previous work, which focused on the resistance of jabon wood to termites after impregnation with wood vinegar (WV) and animal-based adhesive (kak). This paper presents the physicomechanical properties of fast-growing jabon wood impregnated with kak at two concentrations (8% and 10%) in wood vinegar or water as a solvent with and without 4% borax. The physical properties of the impregnation solution, that is, viscosity, density, pH, and solid content, were evaluated according to SNI 06-4567-1998. Some physical parameters, such as weight percent gain (WPG), density, water uptake, anti-swelling efficiency (ASE), crystallinity, and mechanical properties, i.e., modulus of elasticity (MOE), modulus of rupture (MOR), and compression strength parallel to the grain (CS), of the impregnated wood were determined. Based on these results, wood impregnated using a mixture of kak in WV presented better physical (increased WPG, density, dimensional stability, and crystallinity) and mechanical (increased MOE/MOR and compression strength) properties than wood impregnated with a water solvent or untreated wood. The wood impregnated using WV and water solvent improved the physical and mechanical properties. The density of the wood increased by 44%-58% and 32%-47%, ASE radial-tangential increased by 38%-45%; 15%-28% after 24 h of water immersion, crystallinity increased by 59%-74%; 36%, MOE increased by 46%-57%; 28%-31%, MOR increased by 29%-34%; 14%-27%, and compression strength increased by 40%-76%; 38%-72% values to untreated wood.