• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.965-970
• /
• 2008

The separation of sulfone components using light cycle oil(LCO) after oxidation was carried out by solvent extraction method using various polar solvents such as water, n-methyl-2-pyrrolidone(NMP), dimethyl sulfoxide, ethyl acetate, acetonitrile, dimethyl formamide, and methyl alcohol. It was found that phase separation between LCO layer and solvent occurred under mixed solvent adding a proper amount of water. The mixture solvent of NMP and water was a promising extraction solvent due to the selective removal and high distribution coefficient of sulfone component in LCO. 99.5% over of sulfur contents in LCO can be removed by 4 stages equilibrium extraction.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.3
• /
• pp.307-316
• /
• 2016

Objectives: In general, NIOSH method 5506 is most widely used for the occupational exposure measurement of PAHs, but 2-4 ring PAHs have poor desorption efficiency, especially for a filter. The purpose of this study was to determine a method to increase the desorption efficiency of 16-PAHs using an ultrasonic extraction procedure. Methods: Test samples prepared spiked XAD-2 tubes and PTFE filters in the range of $0.01-1.0{\mu}g/mL$ for desorption efficiency study. Four different extraction solvents, acetonitrile, acetone, tetrahydrofuran and dichloromethane, were tested in order to select the most suitable solvent for the extraction of the 16 PAHs. The addition of dimethyl sulfoxide and sonication time were considered in order to determine the method with the highest extraction efficiency. All samples were made in three sets and analysis was replicated seven times by HPLC. Results: Acetonitrile and acetone were the optimized as an extraction solvent and desorption efficiency of 2-ring PAHs such as naphthalene, acenaphthylene were increased 3~19% with dimethyl sulfoxide for XAD-2. Acetone was the best extraction solvent for PTFE filter and the desorption efficiency was increased 3~13% for 2- to 4-ring PAHs. The optimum sonication time was 60 minutes and desorption efficiency increased with extraction time. Conclusions: As a result, the best extraction solvent was acetone with dimethyl sulfoxide for ultrasonic extraction procedure and the desorption efficiency of this method was better than NIOSH 5506's. This study could be applied as a method for occupational exposure measurement of PAHs.

• Food Science and Biotechnology
• /
• v.18 no.4
• /
• pp.996-1000
• /
• 2009

Sapium japonicum was extracted by a pressurized liquid. Operating parameters such as the type and the ratio of solvent to water, temperature, pressure, and number of extractions were investigated as the main variables that influence the extraction efficiencies of total phenolics (TP). MeOH extracted the highest level of TP as 50.4 mg GAE/g compared to 48.8 and 27.2 mg GAE/g with $H_2O$ and EtOH, respectively. $EtOH:H_2O$ (40:60, v/v) was found to be the best solvent for TP extraction as 90.3 mg GAE/g compared to 85.0 and 84.3 mg GAE/g in 40:60 and 60:40 of $MeOH:H_2O$, respectively. TP were increased with the increase of the number of extraction steps. TP content was increased by 11% as the extraction temperature was increased from 40 (97.4) to $50{\circ}C$ (108.3 mg GAE/g). The optimum extraction conditions of TP were; extraction solvent, $EtOH:H_2O$ (40:60, v/v); temperature, $50{\circ}C$; pressure, 10.2 MPa; 2 extraction steps.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.123-131
• /
• 2006

This paper reports the apparatus and method for the safe treatment of pentachlorophenol(PCP)-treated ammunition box by solvent extraction. Experimental variables were chosen as the composition of solvents, types of substance(chips and sawdust), temperatures and sonication to obtain maximum PCP removal from wood samples of the dismantled ammunition box. Up to 99% of PCP in the wood chip was extracted within 2 hours at room temperature when using methanol as the solvent. The extraction volume ratio of methanol per dried sample was about 10. Type of samples, extraction temperature and sonification showed little effects on PCP extraction. Based on this study, a resource recycling system for the treatment of ammunition boxes was recommended.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.3
• /
• pp.207-211
• /
• 2004

Predispersed solvent extraction (PDSE) of succinic acid with Tri-n-octylamine (TOA) dissolved in 1-octanol from aqueous solutions of 50 g/L succinic acid was examined. It was found that the equilibrium data in PDSE was equal to that in conventional solvent extraction in spite of the lack of mechanical mixing in PDSE. The influence of salts on succinic acid extraction and the stability of colloidal liquid aphrons (CLAs) were also investigated. Results indicated that in the presence of sodium chloride, less succinic acid was extracted by CLAs and the stability of CLAs decreased. However, the stability of CLAs was sufficient to make PDSE practically applicable to real fermentation broth, considering the concentration range of salts in the fermentation process for succinic acid.

• Natural Product Sciences
• /
• v.19 no.2
• /
• pp.166-172
• /
• 2013

Caffeine and epigallocatechin gallate (EGCG) are major constituents of green tea, the leaves of Camellia sinensis (Theaceae). Although EGCG is well known for diverse beneficial effect, caffeine is sometimes harmful with adverse effects. Therefore, the extraction efficiency was investigated using different extraction method such as extraction solvent, extraction time, extraction method, and repeated extraction. The content of EGCG and caffeine in green tea extract was quantitated by HPLC analysis. The extraction condition exerted difference on the extraction yield. The content of EGCG was also affected by different extraction condition. Especially, the extraction solvent greatly affected the content of EGCG in the extract. However, the content of caffeine was less affected compared to that of EGCG. The inhibitory effect of green tea extract on pancreatic lipase was almost similar regardless of extraction condition. Taken together, optimization of extraction condition will provide best efficacy for further development of green tea as anti-obesity therapeutics.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.10
• /
• pp.1381-1391
• /
• 2002

The solvent sublation using ion pairs of metal-2-naphthoate(2-HNph) and tetrabutyl ammonium ($TBA^+$) ion has been studied for the concentration and determination of ultra trace Bi(III), In(III) and Tl(Ⅲ) ions in water samples. The partition coefficients ($K_p$) and the extraction percentages of 2-HNph and the ion pairs to methyl isobutyl ketone (MIBK) were obtained as basic data. After the ion pair $TBA^+$·M$(Nph)_4^-$ was formed in water samples, the analytes were concentrated by the solvent sublation and the elements were determined by GF-AAS. The pH of the sample solution, the amount of the ligand and counter ion added and stirring time were optimized for the efficient formation of the ion pair. The type and amount of optimum surfactant, bubbling time with nitrogen and the type of solvent were investigated for the solvent sublation as well. 10.0 mL of 0.1 M 2-HNph and 2.0 mL of 0.1 M $TBA^+$ were added to a 1.0 L sample solution at pH 5.0. After 2.0 mL of 0.2%(w/v) Triton X-100 was added, the ion pairs were extracted into 20.0 mL MIBK in a flotation cell by bubbling. The analytes were determined by a calibration curve method with measured absorbances in MIBK, and the recovery was 80-120%.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.2
• /
• pp.520-529
• /
• 2024

Lycium barbarum extract has a high potential to be developed as a health functional food due to the various health-promoting effects of Lycium barbarum. This study analyzed changes in nutritional and functional components depending on the extraction solvent (purified water and a mixture of purified water and alcohol) and the condition of the sample. The nutritional components (carbohydrates, protein, fat, ash), organic acids, amino acids, total phenolic compounds, and total flavonoids of the extract produced during the extraction process were analyzed. The nutritional composition and functional substances of the extracts showed some differences depending on the type of solvent and the condition of the sample. The amounts of crude protein (7.61%), crude fat (1.63%), carbohydrate (90.22%), and ash (0.54%) of dried Lycium barbarum extract using purified water as a solvent were similar to those of the powder sample extract. The highest content of citric acid was 4.31 mg/mL, similar to the case of acetic acid, when the powder sample used a mixture of purified water and alcohol as a solvent. The highest amino acid content was 357.39 mg/mL when the powder sample was mixed with purified water and alcohol as a solvent. The total amount of phenolic compounds was 686.16 g/L when the powder sample was extracted with a mixture of purified water and alcohol as a solvent. The highest total flavonoid content was 111.32 g/L when the powder sample was extracted with a mixture of purified water and alcohol as a solvent.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.13-18
• /
• 2008

For the evaluation of brominated flame retardants included in polymeric electronic devices, we investigated the extraction methods and solvent systems for four different types of polymers of PC (polycarbonate), PP (polyropylene), PET (poly(ethylene terephthalate)) and PBT (poly(butylene terephthalate)) using different solvent systems of hexane/acetone, THF, toluene, and THF/toluene. In order to compare the extraction efficiency of different methods and solvent systems, the deca-BDE (decabromo diphenyl ether) flame retardant was included in PC, PP, PET and PBT systems and subsequently extracted by soxhlet, ultrasonic, accelerated solvent, microwave and supercritical fluid extraction methods. The amount of the extracted flame retardant was monitored to evaluate the extraction efficiency. The ultrasonic extraction method was found not to be acceptable as an extraction method for the polymer systems mainly due to a low salvation efficiency of the organic solvents. Soxhlet, accelerated solvent and microwave extraction methods exhibited over 80% of extraction efficiency for toluene. The supercritical fluid extraction method, which has been used as an extraction method for flame retardants in polymers, showed the extraction efficiencies of ca. 100% for PC and PP in the optimal extraction conditions of $60^{\circ}C$ and 120 bar.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.5
• /
• pp.450-458
• /
• 2024

Litsea elliptica, a Southeast Asian tree with a rich history of medicinal applications, is attracting increasing research attention. This study investigated the effects of leaf maturity and solvent selection on the extraction of bioactive compounds from L. elliptica leaves, specifically with regard to their antioxidant activity. 2,2'-Azino-bis(3-ethylbenzothiazoline)-6-sulfonic acid (ABTS) method was employed to quantify the free radical scavenging capacity of L. elliptica leaf extracts prepared using three different solvents (n-hexane, ethyl acetate, and ethanol) at three different leaf stages (tender, immature, and mature). These results highlight the significant effects of leaf maturity and solvent selection on the extraction of phenolic compounds and flavonoids from L. elliptica leaves. Ethanol is the most effective solvent for the extraction of bioactive compounds, particularly from mature leaves. The ethanol extraction of tender leaves demonstrated potential for optimizing the antioxidant content. Further research is necessary to investigate the specific factors influencing the observed differences in antioxidant activity between leaves of varying ages and the potential impacts of other bioactive compounds present in the leaves.