• Analytical Science and Technology
• /
• v.34 no.4
• /
• pp.153-159
• /
• 2021

In this study, we describe the development of a new high-performance liquid chromatography (HPLC) method for the simultaneous analysis of six bioactive compounds (including gallic acid, epicatechin 3-gallate, quercitrin, afzelin, quercetin, and kaempferol) from Orostachys japonicus. The extraction method was investigated and optimization of the extraction time (min), solvent composition (%), and solvent to material ratio were conducted. As a result, 30 min extraction with 50% methanol and 40:1 mL/g of solvent: material ratio achieved the highest extraction efficiency with a yield of 3.32 mg/g. Furthermore, the developed HPLC method was validated and the correlation coefficient (R) values were within the satisfactory range of 0.9995-0.9999 over the linearity range of 1.53-417 ㎍/mL. The limit of detection and limit of quantification for the six active components were between 0.03-0.08 ㎍/mL and 0.08-0.26 ㎍/mL, respectively. With these newly optimized and developed methods, four batches of O. japonicus were analyzed to confirm the high extraction efficiency of the method and the feasibility of an application.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.9
• /
• pp.2711-2716
• /
• 2014

The high content of potassium in molasses limits its usage as a raw material for stock feed. Moreover, its high viscosity makes it difficult to develop an efficient removal process. In this study, ion exchange and solvent extraction experiments have been performed to investigate the removal of potassium from a mixture of molasses with water. Cationic exchange resins (AG50W-X8 and Diphonix) showed a high loading percentage of potassium but the occurrence of breakthrough in few bed volumes was a drawback to the industrial application. Among the cationic extractants (D2EHPA, PC 88A, Cyanex 272) tested in this study, saponified PC 88A was found to be the best extractant for the removal of potassium. Batch simulation studies on a three stage counter current extraction confirmed that 85% of potassium was removed from 50 wt % molasses solution in water by using saponifed PC 88A.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.234-238
• /
• 2015

The separation of nitrogen heterocyclic compound (NHC) contained in a model coal tar fraction was compared by the methanol and formamide extraction. The model coal tar fraction comprising four kinds of NHC (NHCs : quinoline, iso-quinoline, indole, quinaldine) and three kinds of bicyclic aromatic compound (BACs : 1-methylnaphthalene, 2-methylnaphthalene, dimethylnaphthalene), biphenyl and phenyl ether was used as a raw material. The aqueous solution of methanol and formamide were used as solvents. A batch-stirred tank was used as the raw material - a solvent contact unit of this work. Independent of the solvent used, the distribution coefficient of NHCs sharply increased by decreasing the initial volume ratio of water to the solvent and increasing the equilibrium operation temperature, whereas, the selectivity of NHCs in reference to BACs decreased. Decreasing the initial volume ratio of solvent to feed resulted in deteriorating distribution coefficients, but the selectivity of NHCs in reference to BAC was almost the constant. The distribution coefficient of NHCs by the methanol extraction was 3~5 times higher than that of NHCs by the formamide extraction, inversely, the selectivity of NHCs based on BACs by the formamide extraction was 3~7 times higher than that of NHCs by the methanol extraction. Furthermore, two different solvent extraction methods by adding the extraction processing speed to the balance between solvency and selectivity of NHCs were compared.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.695-699
• /
• 2012

The objective of this study was to set the optimal extraction condition of flavonoids from onion peels as a by-product generated from the onion industry without suitable processing. Four independent variables, affecting extraction conditions, which are solvent concentration ($X_1$), extraction temperature ($X_2$), pH of the solvent ($X_3$), and solvent ratio to onion peel ($X_4$) were optimized using response surface methodology (RSM). A model equation obtained from RSM is 0.772 of R-square and 0.278 of lack of fit (p>0.05) for the optimal extraction conditions. From the ridge analysis, the conditions flavoring the highest extraction were solvent concentration (v/v) of 70%, extraction temperature of $40^{\circ}C$, extraction solvent pH of 5.3, and a solvent ratio to onion peel ratio of 1:63 (w/v). The flavonoid content obtained under optimal conditions showed 302.63 mg/g, which is 1.12 times higher than the prediction value.

• Preventive Nutrition and Food Science
• /
• v.14 no.2
• /
• pp.129-133
• /
• 2009

Salicornia herbacea is rich in natural minerals, dietary fibers, and potentially health-promoting phenolic compounds. In this paper, an experimental design was applied for the optimization of the ultrasound-assisted extraction of phenolic compounds from lyophilized Salicornia herbacea powder. The experiments were conducted in accordance with a five-level, three-variable central composite rotatable design (CCRD), and the effects of solvent concentration, extraction time, and extraction temperature were evaluated via response surface methodology (RSM). The optimal extraction conditions were as follows: ethanol concentration, 76.80%; extraction time, 20 min; and extraction temperature, $33.21^{\circ}C$; and the solvent concentration was the most significant parameter in this process, under which the predicted total phenolic content was 49.91 mg GAE/g sample.

• Journal of Marine Bioscience and Biotechnology
• /
• v.2 no.1
• /
• pp.55-59
• /
• 2007

The oil and concentrated protein powder from squid viscera was extracted and recovered by a semi-batch supercritical carbon dioxide ($SCO_2$) extraction system and the degree of oxidation in the extracted oil was measured in order to compare with extracted oils using organic solvents. The degree of storage in treated squid viscera by $SCO_2$ extraction was measured in order to compare with untreated squid viscera. As results obtained, it was found that the auto-oxidation of the oils using $SCO_2$ extraction occurred very slowly compared to the oils by organic solvent extraction. And the treated squid viscera by $SCO_2$ extraction was reached the point of initial rottenness slowly than untreated squid viscera.

• Food Science and Preservation
• /
• v.22 no.4
• /
• pp.553-558
• /
• 2015

The aims of this study was to optimize the extraction conditions of sinigrin from Dolsan leaf mustard. Dolsan leaf mustard (Dolsan-eup, Yeosu-si) harvested during at May 2014 was used for sinigrin extraction. After the extraction of sinigrin using 50% $CH_3CN$, 10% $NH_4Cl$, 60% $CH_2OH$, and 70% $CH_3OH$, the sinigrin content was measured by HPLC analysis. The results showed that sinigrin content was highest with 50% $CH_3CN$ solvent extraction and UV detector sensitivity was greater at 228 nm rather than at 242 nm. The sinigrin concentrations of leaf, stem and root with 50% $CH_3CN$ extraction were 345 ppm, 728 ppm, and 539 ppm, respectively. After extraction of the different parts of Dolsan leaf mustard, The standard retention time by HPLC analysis of sinigrin content was 2.054, 2.032, 2.059, and 2.035 min from the root, stalk, and leaf, respectively. On the other hand, HPLC analysis showed that the leaf extracts contained glucoraphanin, one of glucosinolates. The optimum time and extraction solvent for the sinigrin extraction from Dolsan leaf mustard was found to be 24 hr with 50% $CH_3CN$ solvent. In addition, opotimum UV detector k at 228 nm. These results showed that the optimum extraction conditions for Dolsan leaf mustard were 24 hr extraction with 50% $CH_3CN$ solvent. In addition, the optimum wavelength of UV detector was determined to be 228 nm for sinigrin analysis. Therefore, this study could provide a useful information for sinigrin extraction and its systematic analysis during the storage.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3196-3202
• /
• 2012

Post-synthesis is used to synthesize organic hybrid inorganic mesoporous sieves. In this method, the activity and structure of the base sieve are crucial to obtain the definable hybrid materials. The chemical and physical properties of the base can be largely changed either by the final step of its synthesizing processes, by template removal which is accomplished with the oxidative thermal decomposition (burning) method or by solvent extraction method. In this paper we compared two methods for the post-synthesis of organic hybrid MCM-48. When the template was extracted with HCl/alcohol mixture, the final product showed larger pore size, larger pore volume and better crystallinity compared to the case of the thermal decomposition. The reactivity of the surface silanol group of template free MCM-48 was also checked with an alkylsilylation reagent $CH_2=CHSi(OC_2H_5)_3$. Raman and $^{29}Si$ NMR spectra of MCM-48 in the test reaction indicated that more of the organic group was grafted to the surface of the sample after the template was removed with the solvent extraction method. Direct synthesis of vinyl-MCM-48 was also investigated and its characteristics were compared with the case of post-synthesis. From the results, it was suggested that the structure and chemical reactivity can be maintained in the solvent extraction method and that organic grafting after the solvent extraction can be a good candidate to synthesize a definable hybrid porous material.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2675-2679
• /
• 2009

This paper reports the example of headspace mulberry paper bag micro solid phase extraction (HS-MPB-$\mu$-SPE) as a new sampling method for the determination of volatile flavor composition of coriander seeds. Adsorption efficiencies between two configurations of mulberry paper bag were compared, and several parameters affecting the HS-MPB-$\mu$-SPE were investigated and optimized. The optimized technique uses an adsorbent (Tenax TA, 0.1 mg) contained in a mulberry paper bag of front configuration where fine surface was outside, and minimal amount of organic solvent (0.6 mL). Linalool and $\gamma$-terpinene were found as abundant flavor compounds from coriander seeds. The limit of detection (LOD) and the limit of quantitation (LOQ) for linalool of major flavor in coriander seeds were 10.3 ng/mL and 34.4 ng/mL, respectively. The proposed method showed good reproducibility and good recovery. The HS-MPB-$\mu$-SPE is very simple to use, inexpensive, requires small sample amounts and solvent consumption. Because the solvent for extraction is reduced to only a very small volume, there is minimal waste or exposure to toxic organic solvent and no further concentration step.

• Journal of the Korean Society of Tobacco Science
• /
• v.36 no.1
• /
• pp.26-33
• /
• 2014

Simultaneous determination of crop protection agents(CPAs) in food are done with multi-residue methods, which are composed of sample clean-up, concentration, chromatographic separation and detection. Stir Bar Sorptive Extraction(SBSE) technique is used for sample preparation of various analytes in several fields. The aim of this study was to develop a sensitive and fast method based on SBSE followed by thermal desorption - gas chromatography - mass spectrometry(TD - GC/MS) to determine CPAs in tobacco sample. For the analysis of tobacco sample prior to the SBSE method, solvent extraction or ultrasound-assisted solvent extraction was performed. methanol was used as the extraction solvent. The extract was then diluted with water. Finally, the sample was subjected to SBSE. A method for fast screening of crop protection agents in tobacco using SBSE-TD - GC/MS has been developed. About 17 CPAs including organochlorine, organophosphorous and others were identified and quantified. This method showed good linearity and high sensitivity for most of the target CPAs. The method was applied to the determination of CPAs at ng/mL levels in tobacco sample. This method is simple, rapid and may be applied in detection of other components.