• Journal of Pharmaceutical Investigation
• /
• 제34권4호
• /
• pp.289-297
• /
• 2004

Acyclovir (ACV) is one of the most effective and selective agents against viruses of the herpes group. Because of low solubility, bioavailability of ACV has shown below 30% with oral dosage form. In our previous study, we reported that the fabrication of solid dispersion of ACV was possible and the solid dispersion of ACV and PVP was the most useful in all samples. In this study, we examined the effect of mixture ratio of polymers (PEG and PVP) to ACV. Solubility of ACV was dramatically increased up to 25 mg/ml in $80^{\circ}C$ distilled water. So water was used as a solvent to eliminate problem of residual solvent. Spray drying method was used for the solid dispersion of ACV as solvent extraction. Different scanning calorimeter was used to check degradation of drug. Polymer carriers were PEG 6,000 and PVP. In summary, ACV-PVP (1:3) showed the best solubility in distilled water.

• 분석과학
• /
• 제10권1호
• /
• pp.60-65
• /
• 1997

mono-crown ether(benzo-15-crown-5)와 benzo-15-crown-5를 포함한 bis-(crown ether)s(ethylenediamine bis(4'-formylbenzo-15-crown-5))에 의한 알칼리금속과 알칼리토금속 양이온들의 용매추출을 $25^{\circ}C$, 물-클로로포름계에서 조사하였다. mono-crown ether와 bis-(crown ether)s를 사용한 경우 알칼리금속과 알칼리토금속 양이온들에 대한 추출평형상수($K_e$)와 착물형성상수($K_c$)의 크기 순위는 각각 Ca(II)>Na(I)>Sr(II)>K(I)>Mg(II)>Rb(I)와 Sr(II)>Ca(II)>K(I)>Rb(I)>Mg(II)>Na(I) 순으로 증가하였다. 이들 크기 순위는 금속 양이온의 크기 및 전자밀도효과로서 설명할 수 있었다. 또한 mono-crown ether에 비해서 bis-(crown ether)s를 사용한 경우 금속양이온들에 대한 추출효율이 좋게 나타남을 알 수 있었다.

• 자원리싸이클링
• /
• 제13권4호
• /
• pp.39-45
• /
• 2004

염산용액에서 PC88A에 의한 Nd의 용매추출에 관한 연구를 하였다. 추출조건과 실험결과에 이온평형을 적용하여 Nd과 PC88A의 추출반응식 및 평형상수 값을 얻었다. $Nd_{aq}$ $^{ 3+}$ + $1.5H_2$$A_2$,org = $NdA_3$,org + 3H/sun $aq^{+}$ , K=0.25 본 연구에서 구한 Nd의 추출반응의 평형상수를 초기 추출조건에 적용하여 예측한 Nd 분배계수와 측정값은 서로 잘 일치하였다. PC88A의 비누화가 Nd의 추출 및 평형 pH 변화에 미치는 영향을 조사하였다. 비누화된 PC88A는 단위체로 추출반응에 참여하여 Nd의 추출율을 증가시켰다. 수상의 초기 pH에 대한 평형 pH의 변화는 Nd과 PC88A의 초기농도비에 크게 의존했다.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.907-911
• /
• 2012

High purity silicon can be obtained from Al-Si alloys by a combination of solvent refining and centrifugation. Silicon purification by crystallization of silicon from an Al-Si alloy melt was carried out using 2N and 4N purity aluminum and 2N purity silicon as raw materials. The effect of the purity of raw materials on the final silicon ingot purity by centrifugation was investigated for an Al-50 wt% Si alloy. Alloys were melted using an electrical resistance furnace, and then poured into a centrifuging apparatus. A silicon lump like foam was obtained after centrifugation and was leached by an acid in order to get pure silicon flakes. Then silicon flakes were melted to make a silicon ingot using an induction furnace. The purities of the silicon flakes and silicon ingot were enhanced significantly compared to those of the raw materials of silicon and aluminum. The silicon ingot made of 4N aluminum and 2N silicon showed the lowest impurities.

• Composites Research
• /
• 제35권1호
• /
• pp.23-30
• /
• 2022

폴리카보실란은 탄화규소 섬유 방사와 세라믹 제조를 위해 필요한 중요한 전구체이며, 이 전구체는 제조방법 및 공정에 따라 고내열성 및 내산화성 및 연속적인 탄화규소 섬유 생산 능력이 달라진다. 탄화규소 섬유는 폴리카보실란의 합성, 정제 및 분자구조제어기술, 그리고 이를 이용한 용융방사 및 안정화, 열처리 공정을 통해 제조된다. 본 논문에서는 폴리카보실란 전구체를 다양한 용매처리를 통하여 전구체 내에 존재하는 미반응물 및 저분자량의 정제효과를 파악하였으며, 또한 다양한 온도에서의 열처리에 따른 폴리카보실란 전구체의 중합 및 네트워크 재배열에 의한 변화에 대해 열적 분석을 실시하였다. 특히, 폴리카보실란 전구체의 유변물성 특성을 통해 용매처리 및 열처리에 따른 복합점도 및 구조적 배열의 변화를 분석하였다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2022년도 추계학술대회
• /
• pp.112-112
• /
• 2022

This study aims to confirm the possibility of using the invasive alien plants in Jeju as a functional biomaterial. To achieve this purpose, 70% ethanol extract and solvent fractions were prepared for five invasive alien plants (Hypochaeris radicata, Rumex acetosella, Humulus japonicus Siebold & Zucc., Solanum viarum, Lactuca scariolar) and their antioxidant, antibacterial anti-inflammatory and anti-obesity effects were investigated. The DPPH radical scavenging activity of ethanol extract from invasive alien plants was shown in the order of Rumex acetosella > Hypochaeris radicata > Humulus japonicus. Antimicrobial activity of ethanol extract against food poisoning bacteria (4 species) and oral cavity-induced microorganisms (6 species) was measured. As a result, the extract of Humulus japonicus showed high antibacterial effects against food poisoning bacteria (E. coli, V. parahaemolyticus) and oral microbes (L. casei, S. epidermidis, E. faecalis). In LPS-induced RAW 264.7 cells, the anti-inflammatory effect of ethanol extract from invasive alien plants was investigated. As a result, the NO production inhibition activity was highest in the Rumex acetosella and the Humulus japonicus Siebold & Zucc. ethanol extract, and the NO production inhibition activity was concentration-dependent. In addition, the Rumex acetosella and the Humulus japonicus Siebold & Zucc. ethanol extract showed a concentration-dependent inhibitory effect on cytokine (IL-6) production. These extracts also showed inhibitory activity of COX-2, an inflammatory protein. This suggests that NO production inhibition activity by the extract of invasive alien plants is the result of inhibition of iNOS and COX-2 expression. Currently, organic solvent fractions of crude extract are manufactured and the investigation of active ingredients is continuing along with evaluation of biological activity such as anti-inflammatory. These results are expected to be a major data for the study on the separation and utilization of active ingredients with antioxidant, antibacterial and anti-inflammatory effects using foreign plant crude extract and solvent fractions, and are highly likely to be applied to the development of functional food and cosmetics materials.

• Journal of Microbiology and Biotechnology
• /
• 제25권5호
• /
• pp.718-722
• /
• 2015

Techniques for immobilizing effective enzymes on nanoparticles for stabilization of the activity of free enzymes have been developing as a pharmaceutical field. In this study, we examined the effect of three different pH conditions of phosphate buffer, as a dissolving solvent for lysosomal enzymes, on the direct immobilization of lysosomal enzymes extracted from Hen's egg white and Saccharomyces cerevisiae. Titanium(IV) oxide (TiO₂) nanoparticles, which are extensively used in many research fields, were used in this study. The lysosomal enzymes immobilized on TiO₂ under each pH condition were evaluated to maintain the specific activity of lysosomal enzymes, so that we can determine the degree of melanin treatment in lysosomal enzymes immobilized on TiO₂. We found that the immobilization efficiency and melanin treatment activity in both lysosomal enzymes extracted from Hen's egg white and S. cerevisiae were the highest in an acidic condition of phosphate buffer (pH 4). However, the immobilization efficiency and melanin treatment activity were inversely proportional to the increase in pH under alkaline conditions. In addition, enhanced immobilization efficiency was shown in TiO₂ pretreated with a divalent, positively charged ion, Ca²⁺, and the melanin treatment activity of immobilized lysosomal enzymes on TiO₂ pretreated with Ca²⁺ was also increased. Therefore, this result suggests that the immobilization efficiency and melanin treatment activity of lysosomal enzymes can be enhanced according to the pH conditions of the dissolving solvent.

• 약학회지
• /
• 제44권6호
• /
• pp.511-520
• /
• 2000

Various bupivacaine-loaded microspheres were prepared from poly (d,l-lactide) (PLA) or poly (d,l-lactic-co-glycolide) (PLGA) by a solvent evaporation method for the sustained release of drug. PLA and PLGA microspheres were prepared by w/o/w and w/o/o multiple emulsion solvent evaporation, respectively. The effects of process conditions such as emulsification speed, emulsifier type, emulsifier concentration and internal/external phase ratio on the characteristics of microspheres were investigated. The prepared microspheres were characterized for their drug loading, size distribution, surface morphology and release kinetics. Drug loading efficiency was higher in the microspheres prepared by w/o/o multiple emulsion than that by w/o/w multiple emulsion method, because the solubility of bupivacaine HCI was decreased in oil phase compared with water phase. The prepared microspheres had an average diameter between 1 and $2\;{\mu}M$ in all conditions of two methods. In morphology studies the PLA microspheres showed an irregular shape and smooth surface, but PLGA microspheres had a spherical shape and smooth surface. The release pattern of the drug from microspheres was evaluated on the basis of the burst effect and the extent of the release after 24h. The in vitro release of bupivacaine HCl from microspheres showed a large initial burst release and $60{\sim}80%$ release within one day in all conditions of two methods. The extents of the burst release against PLA and PLGA microspheres were $30{\sim}50%$ and $50{\sim}80%$ within 20min, respectively. This burst release seems to be due to the smaller size of microspheres and the solubility of drug in water.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.272-272
• /
• 2010

We have fabricated alumina thick films by inkjet printing technology. Two different types of ink system were formulated in order to understand their evaporation behaviors and their evaporation effects on the powder distribution on, the surface during inkjet-printed alumina thick films. Single solvent system was formulated with N,N-dimethylformamide(DMF), which led to coffee ring effects which non-uniformly distributed alumina particles on the substrate during the ink evaporation. However, Co-solvent system which consists of both Water and DMF produced relatively uniform distribution of the particles on the substrate. We believe that these two different distributions of alumina particles are attributed to the ink fluid flow directions in the ink droplets ejected from the different ceramic ink system. We have modulated inkjet parameters such as dot-to-dot distance, line-to-line distance, jetting velocity and jetting drop size in order to find out the optimum condition for the printing of alumina thick films from two different ink systems. The surface roughness, microstructures and dielectric properties of these inkjet-printed alumina thick films were investigated.

• Journal of Plant Biotechnology
• /
• 제46권4호
• /
• pp.338-345
• /
• 2019

본 연구에서는 개똥쑥 차를 이용한 가공식품 및 천연소재를 개발하고자 물과 다양한 농도의 에탄올로 추출하여 페놀 및 플라보노이드 성분을 분석하였고 항산화 및 항효소 활성을 비교하였다. 개똥쑥 차 추출물은 용매에 따라 총 페놀과 플라보노이드 함량에 유의적인 차이를 보였고 이를 통해 추출요인으로서 에탄올 농도가 중요한 역할을 하는 것으로 확인되었다. 또한 HPLC로 분석된 페놀산과 플라보노이드 정량분석 결과 구성 성분의 차이가 있었으며 이에 따라 항산화 및 항효소 활성에도 영향을 주었다. 개똥쑥 차 이용 측면에서 에탄올 농도 조절을 통해 목적에 맞는 용매 선택을 제안하는 바이다.