• 공업화학
• /
• 제32권5호
• /
• pp.532-540
• /
• 2021

4-도데카노일옥시벤젠술폰산나트륨(sodium dodecanoyl-4-oxybenzenesulfonate; DOBS) 염은 저온에서도 효과적인 표백력과 살균력을 나타내는 물질이다. 본 연구에서는 물(W)-극성 비양자성 용매 계를 사용하는 알칼리 조건하에서 dodecanoyl chloride와 sodium 4-hydroxybenzene sulfonate로부터 DOBS의 온화하고 효율적인 합성방법을 조사하였다. 먼저 물만을 용매로 사용하고 온도 또는 시간을 변화시키며 반응한 결과, 수율은 30 ℃와 1 h 이상의 반응 조건에서 대부분 약 5% 정도로 낮게 나타났다. 효율적인 용매 계를 발견하기 위하여 극성 비양자성 용매의 종류를 변화시키며 물과 혼합하여 제조한 다양한 용매계에서 수율에 미치는 영향을 평가하였다. 수율은 아세톤(acetone; AC)과 물을 혼합한 용매 계에서 가장 우수하였으며, 온화한 반응조건(30 ℃, 1 h 및 상압)의 반응에서 약 82%의 높은 값을 나타냈다. 제조한 DOBS는 높은 표백력 및 살균력을 보여 표백활성화제로서 활용이 가능함을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.123-131
• /
• 2002

Solvolyses rate constant of 1- and 2- naphthoyl chlorides (1 and 2) are reported for aqueous binary mixtures with methanol, ethanol, fluorinated alcohol, acetonitrile and dioxane. Kinetic solvent isotope effects (KISE) in methanol and product selectivities (S) of 2-naphthoyl chloride (2) in alcohol-water are also reported. Dispersions in Grunwald-Winstein correlations $(r{\leq}0.901)$ are discussed by multiple regression analysis incorporating ionizing power $(Y_{Cl})$ scale and rate-rate profiles. Major causes for these phenomena are investigated as an aromatic ring solvation effects, in conjunction with weakly nucleophilic solvation effects ($S_N2$ character), for solvolyses of 1 and for solvolyses of 2, as dual reaction channels, described as $S_N1$-$S_N2$ and $S_AN$-$S_N2$ processes. Distinct border lines between the two pathways are derived from solvolyses rates of 2 in 18 solvent using the results of $log(k/k_o)=mY_{Cl}+lN_T+hI$ plot with values of 1.13 for m, 0.37 for l and 0.15 for h value in 5 aqueous fluorinated alcohol mixtures. Using rate-product correlation, the validity of a third order model based on a general base catalyzed by solvent and contribution from these rate constants, $k_{aa},\;k_{aw}$ and $k_{aw}$, are investigated for $S_AN$-$S_N2$ solvolyses of 2 favored in more rich alcohol media and gradual addition of water to alcohol solvent shows a great shift away from stoichiometric solvation to predominantly medium effects. Rate-rate correlation between solvolyses of 2 and trimethyl acetylchloride (5) with alkyl group in the 29 aqueous solvent mixtures shows appreciable linearity (slope = 0.84, r = 0.987), caused by the same pathway ($S_N1$-$S_N2$ process), even if this correlation coincides with appreciable dispersion (different solvation effect).

• 보존과학회지
• /
• 제36권2호
• /
• pp.103-111
• /
• 2020

건조칠기 유물 세척 시 사용되는 다양한 용매을 대상으로 클리닝 효과를 비교하기 위해 실험을 진행하였다. 건조칠과 자외선에 24일 노출시킨 건조칠에 물, 에탄올, 아세톤, 헥산을 가하여 녹아 나오는 물질을 열분해/GC/MS로 검출하였다. 용출되는 양은 아세톤과 에탄올에서 많았으며, 극성이 높은 용매인 물은 저분자량 용출에 비교적 효율이 좋았다. 비극성 용매인 헥산은 용출량이 매우 낮았다. UV에 24일 노출되어 열화가 많이 진행된 건조칠은 노출되기 전 건조칠에 비해 용출되는 물질이 크게 증가하였다. 열화가 되면서 고분자 형태의 우루시올 사슬이 절단되고 산화되는 과정을 거쳐 dicarboxylic acid를 포함한 저분자량의 극성 물질을 생성하기 때문인 것으로 보인다. 이와 같은 용출특성은 칠기유물을 클리닝하는 용매를 선택할 때 유물의 열화 상태와 더불어 중요한 참고자료가 될 것이다.

• 대한한의학회지
• /
• 제32권1호
• /
• pp.141-150
• /
• 2011

Objectives: The aim of this study was to elucidate the antioxidant effect of solvent fractions of Angelica gigas root. Methods: The ethanol extract of Angelica gigas root was suspended in water and then partitioned with dichloromethane (MC Fr.), ethyl acetate (EA Fr.) and butanol (BuOH Fr.), sequentially. The antioxidant activities of solvent fractions of Angelica gigas root were evaluated for radical scavenging activity against stable free radicals (2,2-diphenyl-1-picrylhydrazyl) DPPH, hydrogen peroxide and superoxide anion radicals. In addition the antioxidant activities of solvent fractions of Angelica gigas root against peroxyl radicals, hydroxyl radicals and peroxynitrites were determined by the total oxy-radical scavenging capacity (TOSC) assay. Results: Among the solvent fractions of MC Fr., EA Fr., and BuOH Fr., BuOH Fr. was found to have stronger antioxidant activity with $IC_{50}$ values of 59.72, 14.36, 30.96 and $44.75\;{\mu}g/m{\ell}$ on the DPPH radical, nitrite, superoxide anion and hydrogen peroxide, respectively, than BHA used as a positive control. Moreover, specific TOSC values(564.8, 276.4 and 405.5 TOSC/mM) of BuOH fr. against peroxyl radicals, hydroxyl radical and peroxynitrite were 4 times higher than GSH (136.5, 67.4 102.6 TOSC/mM) used as a positive control. Conclusions: These results suggest that the BuOH fr. of Angelica gigas root has a high antioxidant activity and can be useful to develop functional food against oxidative stress conditions.

• 한국항해항만학회지
• /
• 제28권5호
• /
• pp.463-468
• /
• 2004

수리조선소에서 발생하는 TBT 함유 선박세척폐수의 용매추출 처리기술을 개발하기 위한 기초연구로서 인공 선박세척폐수를 이용하여 선박용 및 자동차용 디젤, 벙커 B유, 신너, 톨루엔, 에테르 등의 여러 가지 용매들의 TBT 추출효율을 비교하였으며, 추출효율에 대한 추출용매의 양 및 교반시간, 강도, pH 등의 추출조건의 영향을 평가하였다. 선박용 경유는 신나, 병커B 등에 비해 상대적으로 우수한 TBT 추출효율을 보였으며, 적정 추출용매 주입량은 폐수 IL 당 용매 10mL로 평가되었다 TBT 추출을 위한 교반강도가 50rpm에서 250rpm으로 증가함에 따라 잔류 TBT 농도는 약 120ppb에서 2.8ppb로 크게 감소하였다 잔류 TBT는 추출 1시간이후 크게 감소하였으며, 5시간 이후부터는 다시 증가하였다. 추출효율에 대한 Ph의 영향은 크지 않았으나, pH 6∼7의 약산성영역에서 양호한 추출효율을 보였다.

• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.273-279
• /
• 2020

본 연구에서는 바이오매스로부터 파클리탁셀 회수를 위한 전통적 용매 추출(conventional solvent extraction, CSE), 마이크로웨이브를 이용한 추출(microwave-assisted extraction, MAE), 초음파를 이용한 추출(ultrasound-assisted extraction, UAE) 방법을 비교하였다. 추출 용매 종류(아세톤, 클로로포름, 에탄올, 메탄올, 메틸렌 클로라이드)에 따른 영향을 조사한 결과, 메탄올이 모든 추출 방법에서 가장 적합하였다. 메탄올을 이용한 MAE와 UAE의 경우, 단 1회의 추출로 대부분의 파클리탁셀 회수(>95%)가 가능하였다. 또한 MAE와 UAE의 경우 추출 온도(25-45 ℃), 마이크로웨이브 파워(50-150 W), 초음파 파워(180-380 W)의 증가에 따라 파클리탁셀 회수율이 증가하였다. 또한 SEM 분석을 통해 바이오매스 표면을 조사한 결과, 표면 구조가 CSE의 경우에는 조금 주름진 형태를 보인 반면 MAE와 UAE의 경우에는 강한 충격으로 매우 거칠고 파괴된 형태를 보였다.

• Toxicological Research
• /
• 제27권2호
• /
• pp.77-83
• /
• 2011

The objective of this study was to evaluate and compare the antitumor activity of different solvent fractions (ethanol, dichloromethane, ethyl acetate, butanol and water) of the Auricularia auricula-judae 70% ethanol extract on the P388D1 macrophage and sarcoma 180 cells. A dose-dependent antitumor activity of each solvent fraction (from 0.01 mg/ml to 0.3 mg/ml) was shown against both cell types. These cytotoxic effects of all the tested fractions were confirmed on the MTT and SRB assays, without statistical differences each other. $IC_{50}$ value of dichloromethane fraction was 94.2 ${\mu}g/ml$ against sarcoma 180 cells lower than any other solvent fractions. The potent antitumor effect of the dichloromethane (DCM) fraction was also found against solid tumor in BALB/c mice. The splenomegaly and higher splenic index were found in tumor-bearing mice, with the DCM fraction returning to the negative control values. Thus, the results indicated the dichloromethane fraction may have potential ingredients as antitumor candidates.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.316-316
• /
• 2010

Thin films spin-coated from solvent solutions are characterized by solution parameters and spin-coating process. In this study, performance characteristics of polymer solar cells were investigated with changing solution parameters such as solvent and additives. The phase-separation between polymer and fullerene is needed to make the percolation pathway for better transportation of hole and electron in polymer solar cells. For this reason, cooperative effects of solvent mixtures adding additives with distinct solubility have been studied recently. In this study, chlorobezene, 1, 2-dichlorbenzene, and chloroform were used as solvent. 1, 8-diiodoctaned and 1, 8-octanedithiol were used as additives and were added into poly(3-hexylthiophene-2, 5-diyl)/[6, 6]-phenyl C61 butyric acid methyl ester (P3HT/PCBM) blends. Pre-patterned ITO glass was cleaned using ultrasonication in mixed solvent with ethyl alcohol, isopropyl alcohol and acetone. PEDOT:PSS was spin-coated on to the ITO substrate at 3000rpm and was baked at $120^{\circ}C$ for 10min on the hotplate. The prepared solution was spin-coated at 1000rpm and the spin-coated thin film was dried in the Petri dishes. Al electrode was deposited on the thin film by thermal evaporation. The devices were annealed at $120^{\circ}C$ for 30min. By adding 2.5 volume percent of additives into the chlorobenzene from that bulk heterojunction films consisting of P3HT/PCBM, the power efficiency (AM 1.5G conditions) was increased from 2.16% to 2.69% and 3.12% respectively. We have investigated the effect of additives in P3HT/PCBM blends and the film characteristics and the film characteristics including J-V characteristics, absorption, photoluminescence, X-ray diffraction, and atomic force microscopy to mainly depict the morphology control by doping additives.

• 보존과학회지
• /
• 제37권4호
• /
• pp.370-379
• /
• 2021

In the past, PVAc [poly(vinyl acetate)] was used as a fixative for the conservation of the murals in the murals of the Payathonzu temple located in Bagan, Myanmar. In this study, attention was paid to gel cleaning as a method for stably removing such PVAc fixatives. Based on the recent research trend related to the cleaning of murals in Bagan ruins, 3 types of gelling agents (Nevek^®, Laponite^®RD, Carbopol^®980) and 2 types of organic solvents (Acetone, Dimethyl carbonate) were selected. Six types of gel cleaners were prepared by mixing gelling agents and organic solvents, and the properties and fixative removability of these cleaners were compared. As a result of confirming the properties of the prepared gel cleaners, the pH of the cleaners was all in the weak acidic to weakly alkaline range, which was a stable condition for mural application. Also, there was no difference in the viscosity of the cleaners depending on the type of solvent, but there was a difference depending on the type of gelling agent used. Regarding the weight loss ratio of PVAc, which is an indicator of removability, the exposure conditions of the gel cleaners, the boiling point of the solvent used, and the viscosity of the gelling agent acted as factors affecting. As a result of comparing the removability of gel cleaners, it was confirmed that the solvent's fixative solubility, the volatility of the solvent itself, and the solvent release control properties of the gelling agent had a great effect on the removability of the gel cleaners. In Part 2, the stability and the running applicability of the gel cleaners will be investigated by making mockup samples reflecting the properties of the materials and techniques used to produce the mural paintings in the Payathonzu Temple.

• Journal of Electrochemical Science and Technology
• /
• 제14권3호
• /
• pp.262-271
• /
• 2023

For electrode stability and the electrochemical performance of the Li-ion cell, it is essential that the active ingredients and unique additives in the polymer binder be well dispersed with the solvent-based slurry. The efficient procedure used to create the slurry affects the rheological characteristics of the electrode slurry. When successively adding different steps of Nmethyl-2-pyrrolidone (NMP) solvent to the cathode composition, it is evenly disseminated. The electrochemical performance of the Li-ion cells and the electrodes made with slurry formed by single step and multiple steps of addition of NMP solvent are examined. To preform rheological properties of cathode electrode slurry on Ni-rich Lithium Nickel-Cobalt-Aluminum Oxide (LiNi_0.80Co_0.15Al_0.05) (NCA). Also, we investigate different step addition of electrode formation and mechanical strength characterization like peel strength. According to the EIS study, a multi-step electrode slurry has lower internal resistance than a single-step electrode slurry, which results in better electrical characteristics and efficiency. Further, microstructure of electrodes is obtained electrochemical performance in the 18650 cylindrical cells with targeted capacity of 1.5 Ah. The slurry of electrodes prepared by single step and multiple steps of addition of NMP solvent and its effect on the fabrication of 1.5 Ah cells. A three-step solvent addition on slurry has been found to be a lower internal resistance than a single-step electrode slurry as confirmed by the EIS analysis, yielding improved electrical properties and efficiency.