• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.2918-2925
• /
• 2021

The efficiency of decontamination of model spent ion exchange resins, contaminated with magnetite and hematite, with mineral acid solutions, and using electro-decontamination, was evaluated. It has been shown that effective hematite dissolution occurs in concentrated mineral acid solutions. However, the use of direct current increases the decontamination efficiency of spent ion exchange resins contaminated with hematite. It is determined that with increasing voltage and acid concentration, the dissolution efficiency of hematite deposits increases and can exceed 99%. It has been shown that hematite dissolution is accompanied by secondary adsorption of radionuclides due to ion exchange, which can be removed with sodium nitrate solutions.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.79-84
• /
• 2004

The existing technological schemes for processing rhenium-containing raw materials involve the recovery of Re from solutions, which can be effectively achieved by anion exchange method. The application of anion exchange also allows to study rhenium state in aqueous solutions and to develop analytical control methods. The present work is focused on investigation of ion exchange equilibrium in the analytical system Re(VII)-HCl-$SnCl_2$-KSCN-anion exchanger by means of sorption-desorption method as well as by electron, IR- and diffuse reflection spectroscopy. It was shown that rhenium can be quantitatively recovered from this system. It is proposed to use the sorption-spectroscopic method for Re(VII) determination in aqueous solutions. The calibration curve is linear in the concentration range of 0.5-20.0 mg/L (sample volume is 25.0 mL) and the detection limit is 0.05 mg/L. The presence of Mo(VI), Cu(II), Fe(II, III), Ni(II), Zn(II) as well as $K^+,\;Na^+$ do not hinder the solid-phase determination of rhenium. Rhenium (VII) determination by diffuse reflection spectroscopy was carried out in model solutions as well as in samples of river-derived water and in solutions obtained after the dissolution of spent catalysts.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.9
• /
• pp.748-751
• /
• 1994

Poly(ethylene oxide) (PEO) in aqueous solutions has a hydrophobic character which can induce the hydrophobic interaction between its nonpolar parts. The hydrophobic properties of aqueous PEO solutions are studied by the viscometry in terms of the water structure-making and -breaking capabilities of added solutes of ureas. The results show that the contracted conformation of PEO of low molecular weight, namely poly(ethylene glycol) (PEG), does not result from the hydrophobic interaction between the nonpolar parts of PEO but it can participate in a hydrophobic interaction between the nonpolar parts of PEO and added ureas solutes with nonpolar groups, which can induce a large hydrodynamic volume and increase the viscosity. On the other hand, the PEO of large molecular weight seems to behave like any other water soluble polymers with nonpolar parts and its conformation in aqueous solutions is well explained in terms of water structure perturbing capabilities of added ureas.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.177-182
• /
• 2009

We present the geminate rebinding kinetics measurements of CO to 2-methylimidazole (2-MeIm) bound ferrous protoporphyrin- IX (FePPIX) in alkaline glycerol/water mixtures at 293 K after photolysis. The kinetics was probed by monitoring the CO stretching mode using femtosecond vibrational spectroscopy. When 2-MeIm is used in excess, heme dimers that typically form in low viscosity solutions disappear as the viscosity of the solvent increases. Heme aggregates formed in low viscosity solutions turn monomeric as more 2-MeIm is added, suggesting that 6-coordinated heme, including a strong proximal histidine tends to be in the monomeric form. The vibrational band of CO in the 2-MeIM-FePPIX-CO is well described by a single Gaussian function centered at 1958 $cm^-1$ and 28 $cm^-1$ full width at half maximum. The efficiency and rate of the geminate rebinding of CO to the heme increase with viscosity of the solvent, suggesting that retention of the dissociated CO near the heme, for a longer period by the viscous solvent media, accelerates rebinding.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.569-574
• /
• 1991

Methyl red diffusion in polymer solutions was studied by a transient holographic method, forced Rayleigh scattering. In semi-dilute solutions of a polystyrene, where no specific interaction with the probe exists, we found within experimental uncertainty that the retardation of diffusion rate of methyl red is independent of the solvents used. This indicates that the hydrodynamic interaction in polymer coils is not affected by the nature of solvents enough to exhibit a detectable change in the diffusion rate of the probe. On the other hand, a substantial reduction of diffusion rate was observed in poly(methyl methacrylate) solutions in toluene. Together with the similar observation reported with poly(vinyl acetate), it is confirmed that hydrogen bond between the probe and the polymer is responsible for the retarded diffusion. The decay-growth-decay profile found in this system reveals a finite difference in diffusion coefficients of cis and trans isomer of methyl red. We estimate the difference and suggest that the cis isomer interacts with the polymer more strongly than the trans isomer.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.6
• /
• pp.337-343
• /
• 1985

A statistical mechanical approach to elucidate the solvent effects on the high polymer solutions has been carried out on the basis of the simple model of liquids improved by Pak. In our works, the partition function of the polymer solutions is formulated by the lattice model and our simple treatment of liquid structures. For the ideal polymer solutions proposed by Flory, thermodynamic functions of the polymer solutions are obtained and equations of mixing properties and partial molar quantities are derived from the presented partition function of the polymer solutions. Partial molar quantities are calculated for the rubber solutions in carbon disulfide, benzene and carbon tetrachloride. Comparisons have been made between our equations and those of Flory's original paper for partial molar properties of the rubber-benzene system. Comparing the experimental data of the osmotic pressure of polystyrene-cyclohexane system with our calculated values and those of Flory's, our values fit to the agreeable degrees better than those of Flory's.

• Bulletin of the Korean Chemical Society
• /
• v.1 no.2
• /
• pp.49-54
• /
• 1980

Solutions of $Ni^{2+}$ and $Cd^{2+}$ were mixed with the solutions of various dibasic organic acids in the presence of cation exchange resin at room temperature. The distribution ratios of the metal ions between resin and solution were measured, using radioactive metal ions as tracer. From the observed variation of the distribution ratios with acid anion concentrations, it was concluded that $Ni^{2+}$ and $Cd^{2+}$ formed one-to-one complexes with succinate, malonate, o-phthalate and tartarate ions in aqueous, 20 % ethanol-water and 20 % acetone-water solutions. The results of the present study indicated that the relative stabilities of the complexes in solution increased generally in the order : $Ni^{2+}$ < $Cd^{2+}$ complexes. Succinate < malonate < o-phthalate < tartarate complexes. Aqueous < mixed solvent systems.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.6
• /
• pp.552-557
• /
• 1990

Luminescence quenching reactions of photoexcited tris(2,2'-bipyridine)ruthenium (Ⅱ) complex cation, $Ru(bpy)_3\;^{2+}$, by dialkylviologens (dimethyl, dioctyl, dibenzyl, methyloctyl, methyldodecyl, and methylbenzyl) were studied in sodium dodecylsulfate (SDS), poly(styrenesulfonate) (PSS), and poly(vinylsulfonate) (PVS) solutions. The relative quenching rate varies widely with the microheterogeneous media employed: the highest quenching rate is observed for methyldodecylviologen in homogeneous aqueous medium, dibenzylviologen in SDS and PVS solutions, and dimethylviologen in PSS solution; the lowest rate is found for dimethylviologen in homogeneous medium and SDS solution, methyldodecylviologen in PSS and PVS solutions. These results were interpreted in terms of reduction potential of viologens, affinity of $Ru(bpy)_3\;^{2+}$ and viologens to the microparticles, and the structures of the viologen-colloid complexes.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.3
• /
• pp.259-265
• /
• 1992

Cyclic voltammetric behavior of symmetric (dimethyl, diheptyl, dioctyl, dibenzyl) and asymmetric (methyloctyl, methyldodecyl, methylbenzyl) viologens was investigated in homogeneous aqueous solution and sodium dodecyl sulfate (SDS) micellar media. In SDS-free 0.1 M NaCl solutions, the reduction potential is less negative as the chain length of alkyl substituent is longer. This is due to the stabilization of the reduced cationic radical and neutral form of viologen by adsorption on electrode surface. The adsorbed species show the "aging-effect". With the exceptions of methyldodecyl viologen and methylbenzyl viologen, the viologens show strong tendency of conproportionation reaction between viologen dications and neutral forms. In cases of methyldodecyl viologen and methylbenzyl viologen, the conproportionation reaction is kinetically disfavored, though it is thermodynamically favorable. SDS micelles dissolve the adsorbed species and the viologens exhibit two reversible redox processes in SDS micellar solutions. The reduction potentials of viologens in SDS micellar solutions depend little on the length of alkyl chain. Benzyl-substituted viologens are more easily reduced than the alkyl substituted viologens, presumably due to electron-withdrawing character of benzyl group.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3580-3585
• /
• 2022

The thermal stability of carbohydrazide, hydrazine nitrate, acetohydroxamic acid in nitric acid solutions has been studied at atmospheric pressure and above atmospheric pressure. The volumes of gaseous products of thermolysis and the maximum rate of gas evolution have been determined at atmospheric pressure. It has been shown that, despite the high rate of gas evolution and large volumes of evolved gases, the conditions for the development of autocatalytic oxidation are not created. Exothermic processes are observed in a closed vessel in the temperature range of 50-250 ℃. With an increase in the concentration of nitric acid, the temperatures of the onset of exothermic effects for all mixtures decrease, and the values of the total thermal effects of reactions increase, to the greatest extent for solutions with carbohydrazide.