• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.695-702
• /
• 2002

Nonlinear dynamics of striped diffusion flames, by the diffusional-thermal instability with Lewis numbers sufficiently less than unity, is numerically investigated by examining various two-dimensional flame-structure solutions. The Lewis numbers for fuel and oxidizer are assumed to be identical and an overall single-step Arrhenius-type chemical reaction rate is employed in the model. Particular attention is focused on identifying the flame-stripe solution branches corresponding to each distinct stripe pattern and hysteresis encountered during the transition. At a Damkohler number slightly greater than the extinction Damkohler number, eight-stripe solution first emerges from one dimensional solution. The eight-stripe solution survives Damkohler numbers much smaller than the extinction Damkohler number until the transition to four-stripe solution occurs at the first forward transition Damkohler number. At the second forward transition Damkohler number, somewhat smaller than the first transition Damkohler number, the transition to two-stripe solution occurs. However, anu further transition from two-stripe solution to one-stripe solution is not always possible even if one-stripe solution can be independently accessed for particular initial conditions. The Damkohler number ranges for two-stripe and one-stripe solutions are found to be virtually identical because each stripe is an independent structure if distance between stripes is sufficiently large. By increasing the Damkohler number, the backward transition can be observed. In comparison with the forward transition Damkohler numbers, the corresponding backward transition Damkohler numbers are always much greater, thereby indicating significant hysteresis between the stripe patterns of strained diffusion flames.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.31-39
• /
• 2016

Power system engineers use power systems solution programs such as PSS/E, DSATool, Power World simulators for power system analysis. In this reason, KEPCO has begun to develop independent power system program, KW-PSS(KEPCO World Power system Solution) since 2002 and KW-PSS ver2.0 development was completed in 2011. However, it did not have much better functions compared with other programs. Therefore, we focused on the development of the practical and specialized functions. Consequently, PAZ(Power system AnalyZer) ver3.0 has been developed and it realized a differentiation than previous version. In other words, previous version focused on the basic function of power system analysis, PAZ ver3.0 has implemented many automated functions for power system operators were driven maximize operational efficiency. The unique feature of the implementation is as follows : Automated check for exceeding the breaker capacity, Scheduled outage automation, Control-file wizard for various voltage stability analysis, Scenario-based multiple transient stability analysis and Auto calculation of transmission line impedance. As shown in these functions, Those functions provide to use power system analysis easily by automation and simplification for power system engineers. We will secure national expertise through PAZ ver3.0. In addition it will be able to gain competitive edge through the steady development in the world market.

• 한국지형공간정보학회:학술대회논문집
• /
• 한국지형공간정보학회 2002년도 추계학술대회
• /
• pp.73-80
• /
• 2002

다항식비례모형(Rational Function Model)은 센서의 종류에 상관없이 적용이 가능한 범용적 모델이다. 다항식비례모형계수를 결정하기 위해서는 고르게 분포된 다수의 지상기준점이 필요한데 기준점의 취득 방법에 따라 크게 terrain-independent solution과 terrain-dependent solution 두 가지로 나눌 수 있다. 최근에 이루어진 대부분의 연구는 terrain-independent solution에 집중되어 있다. 그러나 비전문가 집단에서의 위성영상 활용성을 증가시키기 위해서는 terrain-dependent solution 방법을 적용한 정확도 향상에 관한 연구가 필요하다. 따라서 이번 연구에서는 KOMPSAT 입체영상에 대하여 terrain-dependent solution을 이용해 다항식비례모형계수를 구하였으며 상관도 분석을 통해 정확도를 향상시켰다. 또한 이를 이용해 영상정합을 수행하고 수치고도모형을 생성하였다. 엄밀 센서모델을 통해 제작한 수치고도모형과 비교해 정확도를 검증해본 결과 두 수치고도모형사이에 각각의 방향별로 dx=18.11m, dy=32.29m, dz=34.58m의 표준편차를 나타내었다. 또한 서로 다른 위성영상으로부터 상관도 분석을 통해 다항식비례모형계수를 구하고 3차원 위치결정을 한 후 검사점과 비교하여 정확도를 분석한 결과 수평방향의 평균오차는 dx=13.08m, dy=18.12m 이고 수직평균오차는 23.75m를 나타내었다.

• 대한기계학회논문집B
• /
• 제28권6호
• /
• pp.688-696
• /
• 2004

Nonlinear dynamic behavior of diffusive-thermal instability in diluted CH$_4$/O$_2$ diffusion flames is numerically investigated by adopting detailed chemistry and transport. Counterflow diffusion flame is adopted as a model flamelet. Particular attention is focused on the pulsating-instability regime, which arises for Lewis numbers greater than unity, and the instability occurs at high strain rate near extinction condition in this flame configuration. Once a steady flame structure is obtained for a prescribed value of initial strain rate, transient solution of the flame is calculated after a finite amount of strain-rate perturbation is imposed on the steady flame. Transient evolution of the flame depends on the initial strain rate and the amount of perturbed strain rate. Basically, the dynamic behaviors can be classified into two types, namely non-oscillatory decaying solution and diverging solution leading to extinction. The peculiar oscillatory solution, which has been found in the previous study adopting one-step chemistry and constant Lewis numbers, is net observed in this study, which is attributed to both convective flow and preferential diffusion effects.

• 펄프종이기술
• /
• 제47권1호
• /
• pp.17-23
• /
• 2015

In bioethanol from acid hydrolysis process, neutralization of acid hydrolyzate is essential step, which resulted in dissolved cations in glucose solution. Impact of cations to Saccharomyces cerevisiae in glucose solution was investigated focused on ethanol fermentation. Both potassium and sodium cations decreased the ethanol fermentation and glucose to ethanol conversion as potassium or sodium cations. In sodium cation, more than 1.13 N sodium cation in glucose solution led to ethanol production less than theoretical yield with severe inhibition. In 1.13 N sodium cation concentration, ethanol fermentation was slowed down to reach the maximum ethanol concentration with 48 h fermentation compared with 24 h fermentation in control (no sodium cation in glucose solution). In case of potassium cation, three different levels of potassium led to silimar ethanol concentration even though slight slow down of ethanol fermentation with increasing potassium cation concentration at 12 h fermentation. Sodium cation showed more inhibition than potassium cation as ethanol concentration and glucose consumption by Saccharomyces cerevisiae.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.868-869
• /
• 2011

Domestic Foreign automaker's are focused on the high-efficiency, low emission cars development. On the way, the hybrid car is the first priority. Hybrid electric vehicle battery pack configurations, EV Relay one of the key components of the engine driving, to assist in the drive motor to supply electrical energy to the battery is a device for opening and closing of the output device. EV Relay determine the longevity and the replacement cycle, The EV Relay environmental conditions and duty cycle considering the reliability tests are essential requirements of many automotive companies to respond to RFQ, this test is essential. This paper using Maxwell Software for Prediction of the Ev Relay impulse, the theoretical data to obtain the impulse to develop methods for mechanical testing after to take advantage of it.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.95-101
• /
• 2004

Dynamic behavior of diffusive-thermal instability in diluted $CH_4/O_2$ diffusion flames is numerically investigated by adopting detailed chemistry and transport. Counterflow diffusion flame is adopted as a model flamelet. Particular attention is focused on the pulsating-instability regime, which arises for Lewis numbers greater than unity, and the instability occurs at high strain rate near extinction condition in this flame configuration. Once a steady flame structure is obtained for a prescribed value of initial strain rate. transient solution of the flame is calculated after a finite amount of strain-rate perturbation is imposed Oil the steady flame. Transient evolution of the flame depends on the initial strain rate and the amount of perturbed strain rate. Basically, the dynamic behaviors can be classified into two types, namely non-oscillatory decaying solution and diverging solution leading to extinction. The peculiar oscillatory solution. which has been found in the previous study adopting one-step chemistry and constant Lewis numbers, is not observed in this study, which is attributed to both convective flow and preferential diffusion effects.

• 한국주조공학회지
• /
• 제38권1호
• /
• pp.1-8
• /
• 2018

In this study, we focused on the correlation between the solidification structure, heat treatment and mechanical properties of the A356 alloy according to the conditions of Sr modification. The microstructural evolution of the eutectic Si and ${\alpha}-Al$ phase in the A356 alloy castings depending on the amount of Sr were investigated during solid solution heat treatment using an optical microscope, a scanning electron microscope and an image analyzer. In addition, tensile tests on the heat treated materials examined the relationship between the microstructure and the fracture surface. The as-cast A356 alloys under 40 ppm Sr showed an undermodified microstructure, but that of the added 60-80 ppm Sr had well modified structure of fine fibrous silicon. After solid solution treatment, the microstructure of the undermodified A356 alloy exhibited a partially spheroidized morphology, but the remainder showed the fragmentation of fibrous shaped silicon. The spheroidization of the eutectic silicon in the modified A356 alloys was completed during heat treatment, which was very effective in increasing the elongation. This is supported by the fracture surface in the tensile test.

• 한국과학교육학회지
• /
• 제16권3호
• /
• pp.295-302
• /
• 1996

The purpose of this study was to investigate the effects of training and use of worked-example on chemical problem-solving learning. Schema acquisition and rule automation are the basic components of skilled problem-solving, which are dependent on appropriately focused attention and sufficient cognitive resources. Training and use of worked-example facilitate schema acquisition and rule automation, so improve problem-solving learning. The subjects of this study were 60 high school students. The average age was 17 years old. Then, they were randomly assigned to each groups and the chemical reaction problems used as experimental materials. The independent variables of this study were training and use of worked-examples and dependent variables were time for solution and the number of error. The results of this study were as follows; 1. The worked-example groups spent significantly less time on solution for acquisition problems than the conventional problem groups. 2. The long-acquisition groups spent significantly less time on solution for acquisition problems than the short-acquisition groups. 3. The modified worked-example groups did not spend significantly less time on solution for acquisition problems than the worked-example groups.

• 대한교통학회지
• /
• 제20권6호
• /
• pp.99-113
• /
• 2002

교통량배분문제 가운데 다중계층 교통량배분문제는 유일해가 보장되지 않는 대표적 사례로 최근 들어 모형의 정식화 및 해법에 관해서 활발하게 전개되고 있다. 정식화에 있어서는 변동부등식이나 고정점 문제를 활용한 정식화가 보편적으로 활용되고 있으나 해법(알고리즘)에 관한 연구는 미흡한 실정이다. 본 연구에서는 변동부등식으로 정의된 다중계층 이용자균형 교통량배분문제의 해법으로서 GA알고리즘과 대각화알고리즘, 군집화알고리즘을 조합한 Hybrid Algorithm을 개발, 제안한다. GA알고리즘과 군집화알고리즘은 해의 탐색을 전역적이면서도 효과적으로 수행하기 위해서 도입된 대각화 알고리즘의 보완적 알고리즘이라 할 수 있다. 본 연구에서는 또한, 다중계층 이용자균형 교통량배분문제의 해법으로서의 제안된 AMSA(The Algorithm of Multiclass Static User Equilibrium Assignment)의 특징을 예제풀이를 통해서 설명하고 있다.