• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2692-2695
• /
• 2008

Polydiacetylene (PDA) is chemosensor materials that exhibit non-fluorescent-to-fluorescent transition as well as blue-to-red visible color change upon chemical or thermal stress. They have been studied in forms of film or microarray chip, so far. In this paper, we provide a novel technique to fabricate continuous micro-fiber PDA sensor using in-situ laser-polymerization technique and 3-D hydrodynamic focusing on a microfluidic chip. The flow of a monomer solution with diacetylene (DA) monomer is focused by a sheath flow on a 3-D microfluidic chip. The focused flow is exposed to 365 nm UV laser beam for in-situ polymerization which generates a continuous fiber containing DA monomers. Then, the fiber is exposed to 254 nm UV light to polymerize DA monomers to PDA. Preliminary results indicate that the fiber size can be controlled by the flow rates of the monomer solution and sheath flows and that a PDA sensor fiber successively responds to chemical and thermal stress.

• 산경연구논집
• /
• 제11권6호
• /
• pp.19-28
• /
• 2020

Purpose: Current study aimed at exploring the effects of ambient anger versus sadness on motive type and coping strategy type when consumers make decision. It focused on whether the negative affects of the anger and the sadness differentially induce approach versus avoidance motive at the place of making decision, and also explored the coping strategy differences between the consumers under the anger and those under the sadness, that is, which strategy is more used between problem-focused strategy and affect-focused strategy when they are under each negative affect. Research design, data and methodology: The experimental groups were divided into two types of group such as the anger-felt group and the sadness-felt group. The experiment was performed with the between-subjects design based on the anger and the sadness. Questionnaire data were collected from undergraduate students assigned to each of the anger group and the sadness group operated by the scenario method, and the data were used to verify research hypotheses by t-test. Results: - First, the anger induced the approach motive more rather than the avoidance motive in making decision. Second, to cope the negative affects, consumers under the anger used problem-focused strategy more than affect-focused strategy, while those under the sadness used affect-focused strategy more than problem-focused strategy. Therefore, this article contributes to the theory related to motive and making decision taken place to consumers under ambient negative emotions. Conclusions: Focusing on the results of this study, there could be managerial implications to brand or product marketing managers. Checking which affect consumers previously felt between anger and sadness when they are under negative affects is at issue to the brand or product marketers when they appeal their brand or product to the consumers. The marketers should build and communicate the messages about their product or brand in the respect of the points of showing problem solution or the best way to handle things to appeal the consumers under the anger. And they should develop and communicate the messages about their product or brand emphasizing the aspects of letting consumers' sad feelings out somehow or controlling their emotions to the consumers under sadness.

• 소성∙가공
• /
• 제23권8호
• /
• pp.469-474
• /
• 2014

With the increased concerns of environmental issues, industries are paying more attention to lightweight metals. Because the high degree of springback is an obstacle to the widespread use of lightweight metals, many investigations have been conducted to reduce springback by increasing temperature. However, increasing the temperature of the whole die or the material is energy inefficient, since generally only a limited area of the material is deformed during sheet metal forming. As a solution to this problem, focused heating that only heats the area where plastic deformation occurs may be an alternative approach. In the current study, V-bending tests were conducted at various temperatures after the AZ31, Ti-GR2 sheets were locally heated using near-infrared (NIR) radiation in order to evaluate the effect of temperature on springback. The results of the experiment confirm that the NIR focused heating reduces the springback of AZ31, Ti-GR2 alloys with increasing temperature.

• 한국세라믹학회지
• /
• 제55권3호
• /
• pp.185-202
• /
• 2018

Photoelectrochemical (PEC) cells can convert solar energy, the largest potential source of renewable energy, into hydrogen fuel which can be stored, transported, and used on demand. In terms of cost competitiveness compared with fossil fuels, however, both photocatalytic efficiency and cost-effectiveness must be achieved simultaneously. Improvement of cost-effective, scalable, versatile, and eco-friendly fabrication methods has emerged as an urgent mission for PEC cells, and solution-based fabrication methods could be capable of meeting these demands. Herein, we review recent challenges for various nanostructured oxide photoelectrodes fabricated by solution-based processes. Hematite, tungsten oxide, bismuth vanadate, titanium oxide, and copper oxides are the main oxides focused on, and various strategies have been attempted with respect to these photocatalyst materials. The effects of nanostructuring, heterojunctions, and co-catalyst loading on the surface are discussed. Our review introduces notable solution-based processes for water splitting photoelectrodes and gives an outlook on eco-friendly and cost-effective approaches to solar fuel generation and innovative artificial photosynthesis technologies.

• Corrosion Science and Technology
• /
• 제19권6호
• /
• pp.281-287
• /
• 2020

Chloride ion is one of the most important corrosive agents in atmospheric corrosion, especially in marine environments. It has high adsorption rate and increases the conductivity of electrolytes. Since chloride ions affect the protective properties and the surface composition of the corrosion product, they increase the corrosion rate. A low level of chloride ions leads to uniform corrosion, whereas a high level of chloride ions may induce localized corrosion. However, higher solution temperatures tend to increase the corrosion rate by enhancing the migration of oxygen in the solution. This work focused on the effect of NaCl concentration and temperature on galvanic corrosion between A516Gr.55 carbon steel and AA7075T6 aluminum alloys. When AA7075T6 aluminum alloy was galvanically coupled to A516Gr.55 carbon steel, AA7075T6 was severely corroded regardless of NaCl concentration and solution temperature, unlike the corrosion properties of single specimen. The combined effect of surface treatment involving carbon steel and aluminum alloy on corrosion behavior was also discussed.

• 대한가정학회지
• /
• 제38권8호
• /
• pp.53-68
• /
• 2000

This study examines family life problems & solution of married women in Chonbuk area as a part of study on family life Issues. Data were collected by questionnaires. The sample consisted of 1142 married women. The major findings were summarized as follows : (1) The degree of recognition about family life problem is rated economic life > woman's parents-in-law> woman's real parents> spouse> children related problems. (2) In the family conflict solution types, the most used types is a rational. (3) The degree of recognition about the family violence is rated abusive languages of husband>husband behavior under the influence of alcohol wife's child abuse>husband's child abuse>abusive languages of wife>battered wife. (4) The kins are still considered the primary source for functions of personal support. Also, the needs for the children related equipments is higest among the public support equipments.

• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.29-35
• /
• 2001

Radiation-induced oscillatory instability in CH$_4$/Air diffusion flames is numerically investigated by adopting detailed chemistry. Counterflow diffusion flame is employed as a model flamelet and optically thin gas-phase radiation is assumed. Attention is focused on the extinction regime induced by radiative heat loss, which occurs at low strain rate. Once a steady flame structure is obtained for a prescribed value of initial strain rate, transient solution of the flame is calculated after a finite amount of strain-rate perturbation is imposed on the steady flame. Depending on the initial strain rate and the amount of perturbed strain rate, transient evolution of the flame exhibits various types of flame-evolution behaviors. Basically, the dynamic behaviors can be classified into two types, namely oscillatory decaying solution and diverging solution leading to extinction.

• 한국인쇄학회지
• /
• 제19권1호
• /
• pp.28-41
• /
• 2001

Rheological properties of ink and Ink-Water balance are the important factors in lithographic printing. Laboratory test method which determines the emulsification rate of dampening solution and ink has been described. The emulsification theory and laboratory test method deduced from Surland and it has become a useful tool for the industry. The effects of pH value and surface tension of dampening solution on the emulsification rate has been tested by many researcher. In this paper we focused on the factors which influence in the emulsification such as pH and surface tension of dampening solution and emulsifying temperature. To study on the factors determining the emulsion velocity, we have measured water pickup and calculated emulsion velocity constant 'k' and activation energy.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.455-460
• /
• 1998

We propose robust MILP model for scheduling and design of multiproduct batch processes in this paper. Recent stochastic modeling approaches considering uncertainty have mainly focused on maximization of expected NPV. Robust model concept is applied to generate solution spectrum in which we can select the best solution based on tradeoff between robustness measure and expected NPV. Robustness measure is represented as penalty term in the objective function, which is Upper Partial Mean of NPV. We can quantify solution robustness by this penalty term and maintain model as MILP form to be computationally efficient. An example illustrates the effectiveness of the proposed model. In many cases sufficient robustness can be guaranteed through a little reduction of expected NPV.

• Advances in materials Research
• /
• 제11권1호
• /
• pp.41-57
• /
• 2022

This paper is focused on delamination analysis of a multilayered inhomogeneous viscoelastic beam subjected to linear creep under constant applied stress. The viscoelastic model that is used to treat the creep consists of consecutively connected units. Each unit consists of one spring and two dashpots. The number of units in the model is arbitrary. The modulus of elasticity of the spring in each unit changes with time. Besides, the modulii of elasticity and the coefficients of viscosity change continuously along the thickness, width and length in each layer since the material is continuously inhomogeneous in each layer of the beam. A time-dependent solution to the strain energy release rate for the delamination is derived. A time-dependent solution to the J-integral is derived too. A parametric analysis of the strain energy release rate is carried-out by applying the solution derived. The influence of various factors such as creep, material inhomogeneity, the change of the modulii of elasticity with time and the number of units in the viscoelastic model on the strain energy release rate are clarified.