• KSBB Journal
• /
• v.21 no.2
• /
• pp.157-163
• /
• 2006

A supercritical fluid process, called aerosol solvent extraction system(ASES), is especially suitable to the pharmaceutical, cosmetic and food industries due to its environmentally-friendly, non-toxic and residual solvent-free properties. In particular, the application of the ASES process to the processing of thermo-labile bioactive compounds has received attention of many scientists and engineers because of its low-temperature operating conditions. Unstable substances such as Vitamin-C and Vitamin-A can be effectively protected from degradation during the preparation process, because the ASES process is free from oxygen and moisture. In this study, Vitamin-C was formulated with 2-hydroxypropyl-${\beta}$-cyclodextrin (HP-${\beta$-CD) for enhancement of Vitamin-C stability and bioavailability using the ASES process. To investigate the influence of the preparation process on the stability of Vitamin-C, Vitamin-C/HP-${\beta}$-CD inclusion complexes were prepared using both conventional solvent evaporation method and ASES process, and stored in a 50 mM phosphate buffer solution of pH 7.0 at $25^{\circ}C$ for 24 hours. From the experimental results, the stability of the Vitamin-C/HP-${\beta}$-CD inclusion complex prepared from the ASES process was found to be much higher than that of pure Vitamin-C and the Vitamin-C/HP-${\beta}$-CD inclusion complex prepared by the solvent evaporation method. The stability of Vitamin-C was observed to increase with the decrease of temperature at a constant pressure or with the increase of pressure at a constant temperature.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1175-1183
• /
• 1997

Lethal effects of high voltage pulsed electric fields (PEF) on suspensions of Lactobacillus plantarum cells in phosphate buffer solution were examined by using continuous recycle treatment system. Critical electric field strength and treatment time needed for inactivation of L. plantarum were 13.6 kV/cm and $16.1\;{\mu}s$ at room temperature, respectively. As decrease in frequency (decreasing pulse number), the degree of inactivation of L. plantarum was increased. A 2.5 log reduction in microbial population could be achieved with an electric field strength of 80 kV/cm, 300 Hz frequency and $2000\;{\mu}s$ treatment time. Survivability was decreased with increase in total treatment time (cycle number) and frequency at the same cycle number. As sterilization model of continuous recycle PEF treatment, $logS=-N_m\;log\;m+B$ and $N_m=k_1\;P_n+k_2$ were established. This model was very well fitted to tile empirical data. The rate of inactivation increased with increase in the processing temperature. The maximum reduction in survivability (5.6 log reduction) was obtained with 80 kV/cm electric field strength at $50^{\circ}C$ for $1000\;{\mu}s$ treatment.

• The KIPS Transactions:PartA
• /
• v.18A no.5
• /
• pp.215-224
• /
• 2011

In this paper, a mechanism connecting all weighted migration routes with minimum cost with EGOSST is proposed. Weighted migration routes may be converted to weighted input edges considered as not only traces but also traffics or trip frequencies of moving object on communication lines, roads or railroads. Proposed mechanism can be used in more wide and practical area than mechanisms considering only moving object traces. In our experiments, edge number, maximum weight for input edges, and detail level for grid are used as input parameters. The mechanism made connection cost decrease average 1.07% and 0.43% comparing with the method using weight minimum spanning tree and weight steiner minimum tree respectively. When grid detail level is 0.1 and 0.001, while each execution time for a connecting solution increases average 97.02% and 2843.87% comparing with the method using weight minimum spanning tree, connecting cost decreases 0.86% and 1.13% respectively. This shows that by adjusting grid detail level, proposed mechanism might be well applied to the applications where designer must grant priority to reducing connecting cost or shortening execution time as well as that it can provide good solutions of connecting migration routes with weights.

• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.121-130
• /
• 2008

In line with the enhanced weight and variety of electronic commerce in business activities, new type of payment settlement and banking system which will enable to store, create and transfer values from the existing method of payment settlement is highly required. Cyber Banking system draws strong attention being the solution of there requirements. The existing Cyber Banking system has the difficulty of operation, administration, in addition to the problem of initial facility investment of big amount, resulted from the usage of the current business process. As the existing Cyber Bank system is unable to carry out the function of storing, creating, and transferring values due to the adoption conventional credit card system instead of the application of non-stop payment system between the seller and buyer. As a result, current Cyber Bank system still imply the deficiency of non-performing cash payment function on internet. This paper describes (1) an integrated application process, One Process One Input (OPOI) which is essential for software development of the Cyber Bank, (2) an application process of payment settlement system to be applied to the electronic commerce in Internet. And then, with these for a basis, (3) design and implementation of payment settlement system through CyberBank for Electronic Commerce. Consequently, by means of this suggested process, we could attempt to solve the problem of existing Cyber Bank system and further to explore the possibility of advanced Cyber Banking being the non-stop payment settlement system. The effectiveness of this suggested system has been practically confirmed.

• Economic and Environmental Geology
• /
• v.50 no.3
• /
• pp.251-256
• /
• 2017

This study presents measures to enhance the efficiency of Successive Alkalinity Producing Systems(SAPS), a natural biological purification method that prevents environmental pollution arising from the release of Acid Mine Drainage(AMD) from abandoned mines into rivers and groundwater. The treatment of AMD using SAPS is based on biological processing technology that mostly involves sulfate reducing bacteria(SRB). It has been proven effective in real-world applications, and has been employed in various projects on the purification of AMD. However, seasonal decrease in temperature leads to a deterioration in the efficiency of the process because sulfate-reducing activity is almost non-existent during cold winters and early spring even if SRB is able to survive. Against this backdrop, this study presents measures to enhance the activity of the SRB of the organic layer by integrating light emitting diode(LED)s in SAPS and to maintain the active temperature using LEDs in cold winters. Given that mine drainage facilities are located in areas where power cannot be easily supplied, solar cell modules are proposed as the main power source for LEDs. By conducting further research based on the present study, it will be possible to enhance the efficiency of AMD treatment under extreme cold weather using solar energy and LEDs, which will serve as an environmentally-friendly solution in line with the era of green growth.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.123-130
• /
• 1969

Five varieties of sweetpotatoes recommended in Korea were investigated with respect to the storing capacity, resin content and the possibility of developing sweetpotato chips as a new processed food item. The results are summarized as follows: 1) Two varieties, Suwon No. 147 and Chun-Mi were more resistant to chilling injury and soft-rot decay than other varieties. 2) The contents of resinous and polyphenolic substances were quite different depending upon the variety. 3) Sweetpotato chips of different color were made from different varieties and rapeseed oil was found to be the best as frying oil. 4) Best conditions to prepare sweetpotato chips with fresh color and proper texture were to dip slices of 1-2 mm thickness in 0.25% sodium bisulfite solution at $40^{\circ}C$ for 30-40 minutes and to subject to deep frying in an oil bath at $150-160^{\circ}C$ for 2.5 to 3.5 minutes. 5) Polyethylene-cellophane film as packing material of sweetpotato chips was the film in the moisture proof and film-impact tests.

• Journal of KIISE:Databases
• /
• v.29 no.4
• /
• pp.321-333
• /
• 2002

As web-based services are becoming more and more popular, concurrent updates of spatial data should be possible in the web-based environments in order to use the various services. Web-based GIS applications are characterized by large quantity of data providing and these data should be continuously updated according to various user's requirements. Faced with such an enormous data providing system, it is inefficient for a server to do all of the works of updating spatial data requested by clients. Besides, the HTTP protocol used in the web environment is established under the assumption of 'Connectionless'and 'Stateless'. Lots of problems may occur if the scheme of transaction processing based on the LAN environment is directly applied to the web environment. Especially for long transactions of updating spatial data, it is very difficult to control the concurrency among clients and to keep the consistency of the server data. This paper proposes a solution of keeping consistency during updating directly spatial data in the client-side by resolving the Dormancy Region Lock problem caused by the 'Connectionless'and 'Stateless'feature of the HTTP protocol. The RX(Region-eXclusive) lock and the periodically sending of ALIVE_CLIENTi messages can solve this problem. The protocol designed here is verified as effective enough through implementing in the main memory spatial database system, called CyberMap.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.135-142
• /
• 2011

Recently, the strategy for N-screen service is in the spotlight along with the consumer's need to use contents regardless of time and place due to the rapid development of communication technology, which is meshing with the desire of service providers seeking a new business model. N-screen, as a screen-extension-concept service which enables consumers to continuously share and use contents in various equipments such as TV, computer and portable terminals, is an advanced type of 3-screen service strategy initially proposed by AT&T, an American telecommunication company. In the N-screen service for pay-contents, in order to support continuous screen changes to and from various equipments, temporary watching right should be given to the equipment intended for screen change. However, it is impossible to give the temporary watching right in the present broadcasting environment, adopting an access-control system. In this paper, the access-control technology being used for pay-contents in the present broadcasting environment and the reason for not being able to give temporary watching right, will be examined. After the examination, the solution for delegation of watching right by using an additional key on the basis of currently used access-control technology, will be proposed.

• The KIPS Transactions:PartB
• /
• v.15B no.1
• /
• pp.45-52
• /
• 2008

As the recent development of the IT services, there is a urgent need of effective diagnosis system to present appropriate solution for the complicated problems of breakdown control, a cause analysis of breakdown and others. So we propose an intelligent diagnosis system that integrates the case-based reasoning and the artificial neural network to improve the system performance and to achieve optimal diagnosis. The case-based reasoning is a reasoning method that resolves the problems presented in current time through the past cases (experience). And it enables to make efficient reasoning by means of less complicated knowledge acquisition process, especially in the domain where it is difficult to extract formal rules. However, reasoning by using the case-based reasoning alone in diagnosis problem domain causes a problem of suggesting multiple causes on a given symptom. Since the suggested multiple causes of given symptom has the same weight, the unnecessary causes are also examined as well. In order to resolve such problems, the back-propagation learning algorithm of the artificial neural network is used to train the pairs of the causes and associated symptoms and find out the cause with the highest weight for occurrence to make more clarified and reliable diagnosis.

• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.281-288
• /
• 2008

Recently, the advance of multimedia hardware has fostered the development of wireless multimedia sensor network which is able to ubiquitously obtain multimedia content such as image or audio from the environment. The multimedia data which has several characteristics such as large size and correlation between the data requires reliability in transmission. However, the existing solution which take the focus on the efficiency of network mainly, is not appropriate to transmit the multimedia data. In the paper, we proposes a reliable asynchronous image transfer protocol, RAIT. RAIT applies double sliding window method in node-to-node image tansfer to prevent the packet loss caused by network congestion. The double sliding window consists of one sliding window for the receiving queue, which is used for prevention of packet loss caused by communication failure between nodes and the other sliding window for the sending queue which prevents the packet loss caused by network congestion. the routing node prevents the packet loss and guarantees the fairness between the nodes by scheduling the packets based on the image non-preemptively. The RAIT implements the double sliding window method by cross layer design between RAIT layer, routing layer, and queue layer. The experiment shows that RAIT guarantees the reliability of image transmission compared with the existing protocol.