• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.901-908
• /
• 2006

With the development of wireless communication techniques and mobile environment we are able to transmit data between mobile systems without restriction of time and space. Recently, researches on the data communication between mobile systems have focused on a small amount of sending out or receiving data and data synchronization at a fixed server and mobile clients in mobile environment. However, two more servers should be able to move mutual independently, information is shared with other systems, and data is synchronized in the special environment like a battlefield situation. Therefore, we propose a data synchronization method between systems moving mutual independently in mobile environment. The proposed method is an optimization solution to data propagation path between servers that considers limited bandwidth and process of data for disconnection communication. In addition, we propose a data reduction method that considers importance and sharing of information in order to reduce data transmission between huge servers. We verified the accuracy of data after accomplishing our data synchronization method by applying it in the real world environment. Additionally, we showed that our method could accomplish data synchronization normally within an allowance tolerance when we considered data propagating delay time by server extension.

• The KIPS Transactions:PartC
• /
• v.14C no.1 s.111
• /
• pp.27-38
• /
• 2007

IPv6 has appeared for solving the address exhaustion of IPv4 and for guaranteeing the problems of security and QoS. It occurs the unexpected new attacks of IPv6 as well as the existing attacks of IPv4 because of the increasing address space to 128bits and the address hierarchies for efficient network management and additions of the new messages between nodes and routers like neighbor discovery and auto address configuration for the various comfortable services. For the successful transition from IPv4 to IPv6, we should get the secure compatibility between IPv4 hosts or routers working based on secure and systematic policy and IPv6. Network manager should design security technologies for efficient management in IPv4/IPv6 co-existence network and IPv6 network and security management framework designation. In this paper, we inspected the characteristics of IPv4 and IPv6, study on security requirement for efficient security management of various attacks, protocol, service in IPv4/IPv6 co-existence and IPv6 network, and finally suggest integrated solution about security vulnerability of IPv6 network in considering of analysis of IPv6 system, host and application, IPv6 characteristics, modified CGA(MCGA).

• The KIPS Transactions:PartD
• /
• v.17D no.5
• /
• pp.337-346
• /
• 2010

Timing diagram is popularly utilized for the reason of its advantages; it is convenient for timing diagram to describe behavior of system and it is simple for described behaviors to recognize it. Various techniques are needed to test systems described in timing diagram. One of them is a technique to derive the system into a certain condition under which a test case is effective. This paper proposes a technique to automatically generate the test input sequence to reach the condition for systems described in timing diagram. It requires a proper input set which satisfy transition condition restricted by input waveform and timing constraints to generate a test input sequence automatically. To solve the problem, this paper chooses an approach utilizing the linear programming, and solving procedure is as follows: 1) Get a Timing diagram model as an input, and transforms the timing diagram model into a linear programming problem. 2) Solve the linear programming problem using a linear programming tool. 3) Generate test input sequences of a timing diagram model from the solution of linear programming problem. This paper addresses the formal method to drive the linear programming model from a given timing diagram, shows the feasibility of our approach by prove it, and demonstrates the usability of our paper by showing that our implemented tool solves an example of a timing diagram model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.286-299
• /
• 2017

The Korean performing arts has been facing stagnation due to oversupply, lack of effective distribution system, and insufficient business models. In order to overcome these difficulties, it is necessary to improve the efficiency and accuracy of marketing by using more objective market data, and to secure audience development and loyalty. This study considers the viewpoint that 'Big Data' could provide more general and accurate statistics and could ultimately promote tailoring services for performances. We examine the first case of Big Data analysis conducted by a credit card company as well as Big Data's characteristics, analytical techniques, and the theoretical background of performing arts consumer analysis. The purpose of this study is to identify the meaning and limitations of the analysis case on performing arts by Big Data and to overcome these limitations. As a result of the case study, incompleteness of credit card data for performance buyers, limits of verification of existing theory, low utilization, consumer propensity and limit of analysis of purchase driver were derived. In addition, as a solution to overcome these problems, it is possible to identify genre and performances, and to collect qualitative information, such as prospectors information, that can identify trends and purchase factors.combination with surveys, and purchase motives through mashups with social data. This research is ultimately the starting point of how the study of performing arts consumers should be done in the Big Data era and what changes should be sought. Based on our research results, we expect more concrete qualitative analysis cases for the development of audiences, and continue developing solutions for Big Data analysis and processing that accurately represent the performing arts market.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.12
• /
• pp.549-564
• /
• 2017

Not only services that are provided by a single system have been various with the development of the Internet of Things and autonomous software but also new services that are not possible before are provided through collaboration between systems. The collaboration between autonomous systems is similar to the ecosystem configuration in terms of biological viewpoints. Thus, it is called the IT Ecosystem, and this concept has arisen newly in recent years. The IT Ecosystem refers to a concept that achieves a mission of each of a number of heterogeneous systems rather than a single system utilizing their own autonomy as well as achieving the objectives of the overall system simultaneously in order to meet a single common goal. In our previous study, we proposed architecture of elementary level and as well as basic several meta-models to implement the IT Ecosystem. This paper proposes comprehensive reference architecture framework to implement the IT Ecosystem by cleansing the previous study. Among them, a utility function based on cost-benefit model is proposed to solve the dynamic re-configuration problem of system components. Furthermore, a measure of using genetic algorithm is proposed as a solution to reduce the dynamic re-configuration overhead that is increased exponentially according to the expansion of the number of entities of components in the IT Ecosystem. Finally, the utilization of the proposed orchestration framework is verified quantitatively through probable case studies on IT Ecosystem for unmanned forestry management.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.388-394
• /
• 2008

본 논문에서는 용액 공정을 이용한 고분자 절연층을 갖는 top-gate 구조의 펜타센 박막 트랜지스터(Thin Film Transistor, TFT)의 특성을 연구하였다. Top-gate 구조의 펜타센 TFT 제작에 앞서 유기 반도체인 펜타센의 결정성 성장을 돕기 위해서 가교된 PVP (cross-linked poly(4-vinylphenol))를 유리 기판 상에 스핀 코팅을 이용하여 형성한 후, 노광 공정을 통해 니켈/은 구조를 갖는 채널 길이 $10{\mu}m$의 소오스, 드레인 전극을 형성하였다. 그리고 열 증착을 이용하여 60 nm 두께의 펜타센 층을 성막하였고, 고분자 절연체로서 PVA(polyvinyl alchol) 또는 가교된 PVA를 용액공정인 스핀 코팅을 이용하여 형성한 후 열 증착으로 알루미늄 게이트 전극을 성막하였다. 이로써 제작된 소자들의 전기적 특성을 확인한 결과 가교된 PVA를 사용한 펜타센 TFT 보다 PVA를 게이트 절연체로 사용한 소자가 전기적 특성이 우수한 것으로 관찰되었다. 이는 PVA의 가교 공정에 의한 펜타센 박막의 성능 퇴화에 기인한 것으로 사료된다. 실험 결과 $0.9{\mu}m$ 두께의 PVA 게이트 절연막을 사용한 top-gate 구조의 펜타센 TFT의 전계 효과 이동도와 문턱전압, 그리고 전류 점멸비는 각각, 약 $3.9{\times}10^{-3}\;cm^2/Vs$, -11.5 V, $3{\times}10^5$으로써 본 연구에서 제안된 소자가 용액 공정형 top-gate 유기 TFT 소자로서 우수한 성능을 나타냄을 알 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.13 no.1
• /
• pp.43-52
• /
• 1981

A series of thermal destruction studies of the most heat resistant yeast strain No. 15 among 61 isolates were conducted in order to establish the optimum pasteurization condition of peach solid pack. The results obtained are summarized as follows: 1. A survival curve of the selected yeast strain No. 15 at $58^{\circ}C$ consisted of heat labile and heat stable fraction, showing broken curve. 2. The actively growing cell showed less recovery rate than 10 day rested cell after agitation-growing for 90 hr. For heating menstrua, peptone solution gave higher recovery rate than peach juice. For recovery medium, YM agar gave higher recovery rate than peach juice agar. The selected yeast was more resistant to heat at pH 4.0 than at pH 3.5 in both heating menstrua and recovery medium. 3. Z value of TDT curve of the selected yeast (heating : at pH 3.5 in peach juice. recovery: at pH 3.5 in peach juice agar) was $4.8^{\circ}C$. 4. The selected yeast No. 15 was identified as Torulopsis candida. 5. In the inoculated pack test of 4 oz can, it was concluded that the optimum P.U. 70/5 was 168 (center temp; $78.5^{\circ}C$, initial temp; $18^{\circ}C$, processing time; 18 min, initial yeast count; $1.0{\times}10^7$ per can).

• Korean Journal of Materials Research
• /
• v.14 no.12
• /
• pp.893-899
• /
• 2004

Even though Ti-6Al-4V has gained popularity as an implant material, the possible dissolution of Al and V ions in body fluids remains a matter of concern. Though commercially pure Ti (Cp-Ti) overcomes this problem, the mechanical strength of pure titanium remains very low. Thus, in this experiment Cp-Ti was processed by Equal channel angular processing (ECAP), in order to increase the mechanical strength. The biocompatibility of ECAP-Ti, Cp-Ti and Ti-6Al-4V was examined by the apatite formation on each sample surface, after treating the surface with 5M NaOH and soaking in Simulated body fluids (SBF). Initially, the samples were mechanically polished on silicone carbide paper (#2000). The polished samples were treated with 5M NaOH solution at $60^{\circ}C$ for 24 hours. The NaOH treated samples were washed gently with distill water and dried at $40^{\circ}C$ for 1 day. The dried samples were heat treated in air at $600^{\circ}C$ for 1 hour. The surface morphology of these samples were studied using SEM and XRD. The SEM studies showed network of pores in all samples. The XRD showed oxide layer formation on Cp-Ti and Ti-6Al-4V. samples. However the oxide layer in ECAP-Ti was not substantial. These samples were immersed in SBF, kept at $36.5^{\circ}C$ for seven days period. At the end of 7 days, the apatite formation was confirmed only on Cp-Ti and was not observed in Ti-6Al-4V and ECAP-Ti. These observations of apatite formation relate to the fact that Cp-Ti showed greater oxide layer than other samples. The apatite examined was confirmed as tricalcium phosphate (TCP) using EDS and XRD.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.350-357
• /
• 2017

Purpose: In-situ monitoring of water quality is fundamental to most environmental applications. The high cost and long delays of conventional laboratory methods used to determine water quality, including on-site sampling and chemical analysis, have limited their use in efficiently managing water sources while preventing environmental pollution. The objective of this study was to develop an on-site water monitoring system consisting mainly of an Arduino board and a sensor array of multiple ion selective electrodes (ISEs) to measure the concentration of $NO_3$ ions. Methods: The developed system includes a combination of three ISEs, double-junction reference electrode, solution container, sampling system consisting of three pumps and solenoid valves, signal processing circuit, and an Arduino board for data acquisition and system control. Prior to each sample measurement, a two-point normalization method was applied for a sensitivity adjustment followed by an offset adjustment to minimize the potential drift that could occur during continuous measurement and standardize the response of multiple electrodes. To investigate its utility in on-site nitrate monitoring, the prototype was tested in a facility where drinking water was collected from a water supply source. Results: Differences in the electric potentials of the $NO_3$ ISEs between 10 and $100mg{\cdot}L^{-1}$ $NO_3$ concentration levels were nearly constant with negative sensitivities of 58 to 62 mV during the period of sample measurement, which is representative of a stable electrode response. The $NO_3$ concentrations determined by the ISEs were almost comparable to those obtained with standard instruments within 15% relative errors. Conclusions: The use of the developed on-site nitrate monitoring system based on automatic sampling and two-point normalization was feasible for detecting abrupt changes in nitrate concentration at various water supply sites, showing a maximum difference of $4.2mg{\cdot}L^{-1}$ from an actual concentration of $14mg{\cdot}L^{-1}$.

• Applied Biological Chemistry
• /
• v.39 no.2
• /
• pp.134-139
• /
• 1996

In order to effectively utilize marine animal skin wastes in marine processing manufacture, conger eel skin, file fish skin and arrow squid skin as raw material of edible gelatin were screened. Conger eel skin was the highest in the collagen content, followed by Ole fish skin and arrow squid skin, in the order named. In the fish skins, the soluble and insoluble collagens occupied $67.4%{\sim}72.3%\;and\;27.7{\sim}32.6%$, respectively, and in the arrow squid skin, 30.4ft and 69.6ft, respectively. No difference in the amino acid composition between soluble and insoluble collagens was detected. Collagen from the marine animal skin catched in coasted and offshore water in Korea consisted ${\alpha}$ chain and ${\beta}$ chain, and ${\alpha}$ chain were hetero type. The sum of proline and hydroxyproline contents in conger eel skin collagen was higher than that in the other skin collagens, while was lower than that pork skin collagen. Conger eel skin collagen exhibited a higher denaturation temperature in solution and a higher degree of proline hydroxylation, compared with skin collagen of the respective species. The physical properties such as gel strength, melting point and gelling point of conger eel skin gelatin were superior to those of file fish skin and arrow squid skin gelatins.