• 전자공학회논문지A
• /
• 제32A권3호
• /
• pp.45-57
• /
• 1995

We derive analytic expressions for the spontaneous emission spectrum of a device using DFB structures including the effects of both facet reflections and the phase of a grating. In solution of coupled mode equations. Equations for the reations between the spontaneous emission spectrum and structure parameters of the device are derived to investigate the effect of structure parameters on the spontaneous emission spectrum and operating characteristics of possibility of evaluating the structure parameters of the device from its spontaneous emission spectrum.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.66.2-66.2
• /
• 2011

A polymer-based multi-walled carbon nanotube (MWCNT) field emission device was fabricated from a composite dispersion of MWCNTs and waterborne polymethyl methacrylate (PMMA). The waterborne PMMA synthesized through the emulsion polymerization method was added to minimize the reagglomeration of dispersed MWCNTs with surfactants in water, and increase the adhesion between the and the substrate. The field emission properties of the fabricated device were optimized by adjusting the density of the emitter and the adhesion between the MWCNTs and the substrate. These were done by controlling the polymer concentration added to the MWCNT dispersion, as well as the amount of spray coating on the substrate. The results confirm the successful fabrication of a polymer-based MWCNT field emission device with a low field of 1.07 $V/{\mu}m$ and a good electric field enhancement factor of 2445. The device was fabricated by adding 0.8 mg/mL of polymer solution to the MWCNT dispersion and applying 20 cycles of spray coating. Application of this same MWCNT/polymer composite solution to a flexible polymer substrate also resulted in the successful fabrication of an electric field emission device with uniform emission and long time stability.

• 한국인쇄학회지
• /
• 제23권1호
• /
• pp.37-51
• /
• 2005

The solution way of color difference in display device is using a device profile recorded with color dimension, color properties of each device and is using sRGB color space. The color matching is better sRGB than RGB color space. The sRGB is independent device color space and based on the monitor characteristice. An accurate characterization of the display device is essential for color matching. The calibration and characterization process in display device is needed to transform the device dependent color to the device independent color. The process of characterization performs a linerizaiton and transforms the linearized values into the CIE XYZ tristimulus values. The purposes of this paper is to estimate color reproduction using device profile and to explain the propriety of transformation method using variable.

• 한국전기전자재료학회논문지
• /
• 제23권1호
• /
• pp.18-23
• /
• 2010

We demonstrated that the solution processed organic light-emitting diodes (OLEDs) have the high efficiency with pre-treated indium-tin-oxide (ITO). ITO surface was pre-treated with four methods and compared each other. The pre-treatment of ITO surface improves the chemical and physical characteristics of ITO such as the surface roughness, adhesion property, and the hole injection ability. These properties were analyzed by the contact angle, atomic force microscope (AFM) image, and the current flow character in device. As a results, the device with ITO pre-treated by $O_2$ plasma shows the current efficiency of 5.93 cd/A, which is 1.5 times the device without pre-treatment.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.123-124
• /
• 2023

This study successfully developed a chromium-free paper-based analytical device (µPAD) for chloride detection in fresh concrete. The sensing materials were chemically synthesized and coated to the paper through drop casting. The fabricated µPAD was thoroughly tested with various concentrations of chloride ions. Upon interaction with the µPAD, the chloride ions in the solution react with a chromium-free silver compound, exhibiting a specific coloring height proportional to the absolute chloride concentration. The height of the color change during a reaction can vary based on the chloride concentration, which allows for predicting the chloride concentration in a solution. The results reveal that µPAD has extraordinary precision in identifying chloride in fresh concrete, which highlights its immense potential for future applications.

• 원예과학기술지
• /
• 제16권3호
• /
• pp.352-354
• /
• 1998

정밀 양액제어를 위하여 양액재배시스템 및 고정도의 양액의 계측/제어가 가능한 시스템을 제작하였고, EC 제어하에서 양액중의 각 이온이 EC에 기여하는 비율을 추정하였다. 양액재배시스템에 별도의 측정조를 사용하여 센서의 세척 및 측정이 가능하도록 설계하였고, 1대의 본체로 복수의 양액재배 시스템의 정밀 계측이 가능하였다. 또한 정량조를 이용한 Overflow 방식의 양액공급장치에 의하여 양액제어 결과, $EC{\pm}0.05mS/cm$, $pH{\pm}0.05$ 이하의 범위에서 양액의 정밀 제어가 가능하였다. EC 제어상태에서 양액중의 2가이온의 증가와 활동도계수의 감소가 나타났고, 활동도계수와 당량이온전 도도를 이용한 양액중의 각 이온의 EC기여도의 변화 내용이 확인되었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권2호
• /
• pp.83-87
• /
• 2004

Phase noise performance and current consumption of Radio Frequency (RF) Voltage-Controlled Oscillator (VCO) are largely dependent on the Quality (Q) factor of inductor-capacitor (LC) tank. Because the Q-factor of LC tank is determined by on-chip spiral inductor, we designed, analyzed, and modeled on-chip differential inductor to enhance differential Q-factor, reduce current consumption and save silicon area. The simulated inductance is 3.3 nH and Q-factor is 15 at 2 GHz. Self-resonance frequency is as high as 13 GHz. To verify its use to RF applications, we designed 2 GHz differential LC VCO. The measurement result of phase noise is -112 dBc/Hz at an offset frequency of 100 kHz from a 2GHz carrier frequency. Tuning range is about 500 MHz (25%), and current consumption varies from 5mA to 8.4 mA using bias control technique. Implemented in $0.35-{\mu}m$ SiGe BiCMOS technology, the VCO occupies $400\;um{\times}800\;um$ of silicon area.

• Corrosion Science and Technology
• /
• 제20권5호
• /
• pp.266-280
• /
• 2021

Since 2020, the International Maritime Organization (IMO) has updated regulations on the sulfur content to be less than 0.5% in exhaust gas emitted from ships. Accordingly, the exhaust gas post-treatment device for ships, which is SOx/NOx reduction technology, was introduced. However, the exhaust gas post-treatment device is suffering corrosion because of the harsh corrosive environment formed by sulfate and chlorine oxide through the desulfurization process. In this investigation, cyclic potentiodynamic polarization (CPDP) experiment for UNS S31603 and UNS N08367 was performed in a green death solution that simulates the environment of a desulfurization device. The corrosion rate of UNS S31603 at the highest temperature was about 3 times higher than that of UNS N83067. Also, electron microscope scan revealed corrosion type UNS N83067 presents intergranular corrosion tendency. On the other hand, UNS S31603 was observed as general corrosion. The α values of UNS N08367 at 30 ℃ and 60 ℃ were higher than those of UNS S31603, thus UNS N08367 is considered to have a higher local damage tendency. Whereas, since the α value of UNS S31603 at 90 ℃ is larger than that of UNS N08367, UNS S31603 is considered to have a higher local damage trend.

• 한국컴퓨터정보학회논문지
• /
• 제23권9호
• /
• pp.107-112
• /
• 2018

Smart livestock has been proposed as a solution to increase farmers' income and new recruitment of livestock farmers. In this paper, a standardization Plan of breeding management device and collected information for smart livestock cattle was proposed. l Sophisticatedly, basic information will be established for all six types of livestock breeding management device: military automatic feeder, calf automatic feeder, smart milk cooler, feed bin to be able to measure feed residue, smart scale, and biometric information collection device. The standardization, common use, and stabilization of major livestock management device and collected information were suggested to solve the problems caused by in existing breeding management device.

• 한국정보통신학회논문지
• /
• 제12권10호
• /
• pp.1830-1834
• /
• 2008

현대에 컴퓨터를 기반으로 무선으로 데이터를 측정하고 제어하는 device들이 보편화되어 있으며, 낮은 가격으로 높은 성능을 낼 수 있는 device들이 각광 받고 있다. 그리고 산업 환경에서 유선 이용이 불가능한 곳이나 직접 사람이 들어갈 수 없는 위험한 장소의 거리 측정 할 때 Zigbee 통신 Solution을 이용한다면 공간의 제약 없이 컴퓨터로 데이터를 분석 처리 할 수 있다. Zigbee 통신은 기존의 RF나 bluetooth등에 비해 전력소모에서 효율적이고 battery 사용을 장시간 사용할 수 있는 장점을 가지고 있다. 또한 시스템 구현 비용이 아주 저렴하기 때문에 네트워크에 많은 노드들을 설치 할 수 있다. 이에 본 논문에서 구현한 거리 측정 무선 송/수신 시스템은 여러 개의 LMC(Laser Measuring Control)와 이에 상응하는 여러 개의 Slave Zigbee에서 하나의 Master Zighee 까지 무선으로 데이터를 송신한다. Master Zigbee는 LMC에서 측정한 데이터들을 수신 받아 컴퓨터로의 처리를 하고자 하였다.