• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.797-802
• /
• 2000

Flow shop scheduling problem involves processing several jobs on common facilities where a setup time Is incurred whenever there is a switch of jobs. Practical aspect of scheduling focuses on finding a near-optimum solution within a feasible time rather than striving for a global optimum. In this paper, a hybrid meta-heuristic method called tabu-genetic algorithm(TGA) is suggested, which combines the genetic algorithm(GA) with tabu list. The experiment shows that the proposed TGA can reach the optimum solution with higher probability than GA or SA(Simulated Annealing) in less time than TS(Tabu Search). It also shows that consideration of setup time becomes more important as the ratio of setup time to processing time increases.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.220-223
• /
• 2006

BLT nanotubes were synthesized by using simple and convenient method template-wetting process. Porous alumina membranes were prepared by 2 step anodic oxidation as the template. To improve wetting properties and make low surface energy, BLT solution was mixed with polymer. Polymer was removed completely during annealing. After completely etching the template in 30 wt% KOH solution, we demonstrate that BLT nanotubes with a diameter of 200 nm can be fabricated. Grain growth process of BLT nanotubes during baking, and furnace annealing was examined by FE-SEM and XRD.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.936-943
• /
• 2002

The Simulated Annealing (SA) algorithm has been successfully applied to various difficult combinatorial optimization problems. Since the performance of a SA algorithm, generally depends on values of the parameters, it is important to select the most appropriate parameter values. In this paper the SA algorithm is optimally designed for performance acceleration, by using the Taguchi method. Several test problems are solved via the SA algorithm optimally designed, and the solutions obtained are compared to solution results McMullen & Frazier(2000). The performance of the SA algorithm is evaluated in terms of solution quality and computation times. Computational results show that the proposed SA algorithm is effective and efficient in finding near-optimal solutions.

• 한국세라믹학회지
• /
• 제44권5호
• /
• pp.141-143
• /
• 2007

Nanotubes and microtubes of ferroelectric lead zirconate titanate (PZT) were synthesized by means of a simple and convenient process called a template-wetting process. Nanoporous alumina and macroporous Si were used as template materials to fabricate the corresponding tubes. For the improvement of the wetting properties of the wetting solution, the PZT solution was mixed with a polymer. The polymer was removed completely during annealing. The grain growth processes of the PZT nanotubes during baking and furnace annealing were examined by means of field emission electron microscope (FE-SEM) and X-ray diffractometry (XRD).

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.172-177
• /
• 2021

The microstructure and texture of three 316L foils of 25 ㎛ thickness, which were subjected to different manufacturing process, were systematically characterized using advance analytical techniques. Then, the electrochemical property of the 316L foils in simulated pressurized water reactor (PWR) solution was analyzed using potentiodynamic polarization. The results showed that final rolling strain and annealing temperature had evident effect on grain size, fraction of recrystallization, grain boundary type and texture distribution. It was suggested that large final rolling strain could transfer Brass texture to Copper texture; low annealing temperature could limit the formation of preferable orientations in the rolling process to reduce anisotropy. Potentiodynamic polarization test showed that all samples exhibited good corrosion performance in the simulated primary PWR solution.

• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.275-281
• /
• 2007

The effect of annealing on the pitting corrosion resistance of anodized Al-Mg alloy (AA5052) processed by equal-channel angular pressing (ECAP) was investigated by electrochemical techniques in a solution containing 0.2 mol/L of $AlCl_3$ and also by surface analysis. The Al-Mg alloy was annealed at a fixed temperature between 473 and 573 K for 120 min in air after ECAP. Anodizing was conducted for 40 min at $100-400A/m^2$ at 293 K in a solution containing 1.53 mol/L of $H_2SO_4$ and 0.0185 mol/L of $Al_2(SO_4)_3$. The internal stress generated in anodic oxide films during anodization was measured with a strain gauge to clarify the effect of ECAP on the pitting corrosion resistance of anodized Al-Mg alloy. The time required to initiate the pitting corrosion of anodized Al-Mg alloy was shorter in samples subjected to ECAP, indicating that ECAP decreased the pitting corrosion resistance. However, the pitting corrosion resistance was greatly improved by annealing after ECAP. The time required to initiate pitting corrosion increased with increasing annealing temperature. The strain gauge attached to Al-Mg alloy revealed that the internal stress present in the anodic oxide films was compressive stress, and that the stress was larger with ECAP than without. The compressive internal stress gradually decreased with increasing annealing temperature. Scanning electron microscopy showed that cracks occurred in the anodic oxide film on Al-Mg alloy during initial corrosion and that the cracks were larger with ECAP than without. The ECAP process of severe plastic deformation produces large internal stresses in the Al-Mg alloy; the stresses remain in the anodic oxide films, increasingthe likelihood of cracks. It is assumed that the pitting corrosion is promoted by these cracks as a result of the higher internal stress resulting from ECAP. The improvement in the pitting corrosion resistance of anodized AlMg alloy as a result of annealing appears to be attributable to a decrease in the internal stresses in anodic oxide films

• 인터넷정보학회논문지
• /
• 제6권6호
• /
• pp.99-106
• /
• 2005

멀티프로세서 시스템에서 스케줄링은 매우 중요한 부분이지만, 최적의 해를 구하는 것이 복잡하여 다양한 휴리스틱 방법들에 의한 스케줄링 알고리즘들이 제안되고 있다. 최근 유전 알고리즘을 사용한 멀티프로세서 스케줄링 알고리즘들이 제시되고 있지만, 제시된 알고리즘 대부분은 한가지만의 목적을 가지는 단순한 알고리즘이다. 본 논문에서는 유전 알고리즘을 이용한 새로운 스케줄링 알고리즘을 제시한다. 또한, 해를 구하는 과정에서 시뮬레이티드 어닐링 (simulated annealing)의 확률을 이용하여 유전 알고리즘의 성능을 개선시킨다. 제시된 알고리즘은 태스크들의 최종 수행 완료 시간 (makespan)을 최소화하는 것과 사용된 프로세서의 수를 최소화하는 두 가지의 목표를 가진다. 모의 실험을 통하여 제시된 알고리즘이 다른 알고리즘보다 최종 수행 완료 시간과 사용된 프로세서의 수에서 더 나은 결과를 보임을 확인할 수 있었다.

• 한국시뮬레이션학회논문지
• /
• 제24권4호
• /
• pp.77-88
• /
• 2015

본 논문은 작업별 위치기반 지수학습 효과를 갖는 2-에이전트 단일기계 스케줄링 문제를 고려한다. 에이전트 A는 가중 완료 시간의 합을 최소화하며, 에이전트 B는 총소요시간에 대한 상한 값을 만족하는 조건을 갖는다. 본 연구에서는 먼저 우수해/가능해에 대한 특성을 개발하고, 이를 이용하여 최적 해를 찾기 위한 분지한계 알고리즘을 설계한다. 또한 근사 최적 해를 구하기 위해 6가지 다른 초기해 생성 방법을 이용한 시뮬레이티드 어닐링 알고리즘을 제안한다. 수치 실험을 통해 제안된 알고리즘의 우수한 성능을 검증한다. 실험 결과, 다른 초기해 생성 방법들 간에는 %errors 차이가 유의하게 발생하지 않았으며, 에이전트 A의 작업 순서를 무작위로 생성할 때 성능이 좋아짐을 발견하였다. 반면에, 에이전트 B의 초기해 생성 방법은 성능에 영향을 미치지 않았다.

• BMB Reports
• /
• 제32권3호
• /
• pp.288-293
• /
• 1999

In order to understand the initial interaction of the substrates malonate, ATP, and CoA with malonyl-CoA synthetase, the catalytic product malonyl-CoA was characterized by NMR spectroscopy and molecular modeling. To assign proton and carbon chemical shifts, two-dimensional $^1H-^1H$ DQF-COSY and $^1H-^{13}C$ HMBC experiments were used. The structure of malonyl-CoA in the solution phase was determined based on distance constraints from NOESY and ROESY spectra. The structures were well-converged around the pantetheine region with the pairwise RMSD value of 0.08 nm. The solution structure exhibited a compact folded conformation with intramolecular hydrogen bonds among its carbonyl and hydroxyl groups. These findings will help us to understand the initial interaction of malonate and CoA with malonyl-CoA synthetase.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.136-142
• /
• 2004

Effects of Nb(Niobium) contents and solution annealing on the strength and fatigue lift of 18%Ni maraging steel commonly using in aircraft, space field, nuclear energy, and vehicle etc. were investigated. Also the fatigue life stress intensity factor were compared experiment result and FEA(finite element analysis) result. The more Nb content, the higher or the lower fatigue lift on base metal specimens or solution annealed specimens showing that the fatigue life was almost the same. The maximum stresses of X, Y, and Z axis direction showed about 2.12${\times}$10$^2$MPa, 4.40${\times}$10$^2$MPa and 1.32${\times}$10$^2$MPa respectively. The Y direction stress showed the highest because of the same direction as the loading direction. The fatigue lives showed about 7% lower FEA result than experiment result showing almost invariable error every analyzed cycle. Stress intensity factor of the FEA result was lower about 3.5∼10% than that of the experiment result showing that the longer fatigue crack length, the higher error. It considered that the cause for the difference was the modeled crack tip having always the same shape and condition regardless of the crack growth.