• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.242-242
• /
• 2012

Transparent oxide semiconductors are increasingly becoming one of good candidates for high efficient channel materials of thin film transistors (TFTs) in large-area display industries. Compare to the conventional hydrogenated amorphous silicon channel layers, solution processed ZnO-TFTs can be simply fabricated at low temperature by just using a spin coating method without vacuum deposition, thus providing low manufacturing cost. Furthermore, solution based oxide TFT exhibits excellent transparency and enables to apply flexible devices. For this reason, this process has been attracting much attention as one fabrication method for oxide channel layer in thin-film transistors (TFTs). But, poor electrical characteristic of these solution based oxide materials still remains one of issuable problems due to oxygen vacancy formed by breaking weak chemical bonds during fabrication. These electrical properties are expected due to the generation of a large number of conducting carriers, resulting in huge electron scattering effect. Therefore, we study a novel technique to effectively improve the electron mobility by applying environmental annealing treatments with various gases to the solution based Li-doped ZnO TFTs. This technique was systematically designed to vary a different lithium ratio in order to confirm the electrical tendency of Li-doped ZnO TFTs. The observations of Scanning Electron Microscopy, Atomic Force Microscopy, and X-ray Photoelectron Spectroscopy were performed to investigate structural properties and elemental composition of our samples. In addition, I-V characteristics were carried out by using Keithley 4,200-Semiconductor Characterization System (4,200-SCS) with 4-probe system.

• 전기의세계
• /
• v.22 no.5
• /
• pp.12-18
• /
• 1973

This paper deals with Linear Programming by Signal Flow Graph technique which is different from that of Mason and Coates. The objective function is regarded as variable, and slack variable node, artificial variable node and objective function variable (constant) node are newly defined, which shows the process for optimization of solution very intuitively. Also methods for solving L.P. and examples with subject to Ax.leq.b, Ax=b and Ax.geq.b are presented.

• Journal of electromagnetic engineering and science
• /
• v.3 no.1
• /
• pp.57-61
• /
• 2003

The effects of high frequency noises on a perturbational inversion technique for a stratified dispersive medium are investigated in this paper. It is shown that the perturbational solution becomes unstable under high frequency noises. The physical origin of this instability is described. In order to enhance the robustness of the perturbational inverse scattering solution, a parametric inversion technique is introduced. The examples for the 2-pole and the 3-pole reflection coefficients are compared and contrasted, and improvement of the robustness of the solutions is shown.

• Journal of Chest Surgery
• /
• v.6 no.2
• /
• pp.219-224
• /
• 1973

82 cases of esophageal stenosis due to lye solution in our hospital, which is surgicallly treated with retrosternal esophagoplasty were reported. female was 2 times more then male and average age is 30 years old. Dyphagia and precordial pain were chief complaint. In this technique, jejunum, right and left colon were substituted for constricted esophagus. Postoperative complication rate 14.6%, mortality rate due to other complication were 21.9% but had not seen in this operative technique.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.2
• /
• pp.178-186
• /
• 1996

This paper proposes a new design technique that can be used for BSB (brain-state-in-a-box) neural networks to realize autoassociative memories. The proposed method is based on the parametrization of solution space and optimization using genetic algorithm. The applicability of the established technique is demonstrated by means of a simulation example, which illustrates its strengths.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.114-118
• /
• 2002

We introduce a design technique for homogeneous magnets using evolution strategy. The method has several advantages over existing techniques including: it allows complete flexibility in geometric constraints on the shape of both the coil and the homogeneous volume; it guarantees a globally optimal solution, and it automatically searches the minimum number of coils that satisfies given constraints.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.188-200
• /
• 2002

In this study, a pavement evaluation method is introduced by a case study of the measurement data obtained in Incheon International Airport. Based on the results obtained by both visual inspection and automobile inspection equipments, the pavement surface condition is evaluated and used for maintenance and rehabilitation strategy for pavement. In addition, the special attention was given to the back calculation and solution technique of E-modulus by FWD's deflection data in Pavement.

• Structural Engineering and Mechanics
• /
• v.38 no.5
• /
• pp.619-631
• /
• 2011

This paper provides a complex variable BIE for solving the periodic notch problems in plane plasticity. There is no limitation for the configuration of notches. For the periodic notch problem, the remainder estimation technique is suggested. In the technique, the influences on the central notch from many neighboring notches are evaluated exactly. The influences on the central notch from many remote notches are approximated by one term with a multiplying factor. This technique provides an effective way to solve the problems of periodic structures. Several numerical examples are presented, and most of them have not been reported previously.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.5
• /
• pp.626-639
• /
• 2003

Statement of problem : Recently, in attempts to reinforce the acrylic resin and to reduce the polymerization shrinkage, it has been reported that adding vinyloligo-silsesquioxane (vinyl-POSS) to PMMA significantly compensates for polymerization shrinkage and somewhat increases the fracture resistance. Purpose : There haven't been any studies on abrasion that can affect the adaptation of the denture in long-term use. In this study abrasion resistance was compared between acrylic resin with vinyl-POSS and commercialized acrylic resin for denture base. In addition, the difference in abrasion resistance according to molding methods was compared. Material and method : Using PaladentR 20 including vinyl-POSS. PaladentR 20, Lucitone 199R, SR IvocapR, denture bases were fabricated using compression molding technique and continuous-pressure injection technique. Surface hardness and abrasion were measured for each group, and the worn surfaces were observed under a scanning electron microscope. Results : 1. When surface hardness was measured for each material and molding technique, there was no statistically significant difference among the materials. (p<0.05) 2. When same denture base material and molding technique were used, the abrasion due to toothpaste solution was 5 times as severe as the abrasion due to soap solution. 3, When toothpaste solution was used, the abrasion decreased in the order of PaladentR20, PaladentR 20 including vinyl-POSS, SR IvocapR, and Lucitone 199R. However statistically significant difference was seen only among PaladentR 20, SR IvocapR, and Lucitone 199R. (p<0.05). 4. When soap solution was used, the abrasion was more severe in PaladentR 20 and including vinyl-POSS PaladentR 20 groups than in SR IvocapR and Lucitone 199R groups. (p<0.05). Conclusion : Addition of vinyl-POSS doesn't improve the abrasion resistance, and the abrasion resistance was similar to those of existing materials. Additional studies under different conditions are needed. For clinical application of vinyl-POSS, further investigations with different requirements and conditions are necessary.

• Fashion & Textile Research Journal
• /
• v.5 no.1
• /
• pp.71-76
• /
• 2003

Three different types of chitosan were prepared from red crab shells to study anti-microbial activity of chitosan on pathogenic bacteria, MRSA(Methicillin-resistant. Staphylococcus aureus), Water-insoluble chitosan, whose degree of deacetylation is kept over 90% and molecular weights are 20,000, 500,000, 150,000, 80,000, and 40,000, respectively. Water-soluble chitosan, whose degree of deacetylation is about 48% and molecular weights are 200,000 and 80,000. Water-soluble chitosan, whose degree of deacetylation is 82% and molecular weight is 3,900. The anti-microbial activities of three types of chitosan were investigated by Tube Dilution Technique(TDT) and Agar Plate Smear Method(APSM). And the following conclusions are made ; Chitosan having 5 different types of M.W chitosan (over 90% deacetylation) showed similar anti-microbial activities at over 0.05% concentration. Especially, chitosan having M.W 40,000 150,000 showed the excellent anti-microbial activity. The anti-microbial activity of chitosan was enhanced when the chitosan/acetic add solution was aged for 7days. The anti-microbial activity of chitosan was only shown at chitosan/acetic acid solution. The anti-microbial activity was not detected in chitosan solution dissolved in neutral pH water. Therefore, it can be concluded that the anti-microbial activity was due to NH3+ cationic ion of chitosan in acidic aqueous solution.