• 공업화학
• /
• 제8권2호
• /
• pp.332-338
• /
• 1997

$NO_2$기체의 감지를 위한 sensor의 원료물질로 $SnO_2$를 사용하였으며 $SnCl_4$ 용액을 암모니아수로 침전시킨 후 공기중에 하소하여 $SnO_2$를 제조하였다. $SnO_2$의 특성을 XRD 및 IR로 연구하였으며 스크린-프린팅법으로 $SnO_2$후막소자를 제작하였다. 하소온도가 높을수록 $SnO_2$의 입자의 크기는 결정의 성장으로 증가하였다. $1000^{\circ}C$에서 하소된 $SnO_2$분말을 가지고 만든 소자를 $700^{\circ}C$에서 열처리하여 제작된 $SnO_2$소자는 동작온도 $250^{\circ}C$에서 $NO_2$기체에 대한 우수한 감지특성과 선택성을 나타내었다.

• The Journal of Korean Physical Therapy
• /
• 제12권2호
• /
• pp.191-201
• /
• 2000

This study was investigated the effects of a direct current and ultrasound on transdermal transport of dexamethasone into the rabbits which had contusion in the thigh. Each group was treated under the tallowing conditions. 1. EXP group I : $10\%$ dexamethasone ointment and ultrasound 2. EXP group II : $1\%$aqueous solution of dexamethasone and iontophoresis 3. EXP group III : the application of $10\%$ dexamethasone ointment 4. Control group : No treatment The degree of anti-inflammation was evaluated by the naked eye, the change in girth of thigh, and a light microscope. The results were as follows. 1.8y the naked eye. an inflammation sign was seen in all groups and especially. symptoms of redness. heat swelling were prominent in EXP group I. 2. In comparision in the change of girth of thigh, only EXP group II showed no significant change. Therefore, it meant that there was effective anti-inflammatory reaction in EXP group II. 3. The infiltration of inflammation cells, the degree of swelling, and the degree of crosslinking of connective tissues were evaluated with a light microscope. As a result, EXP group II showed the most effective anti-inflammatory reaction. And, in order of EXP group III, control group, the effect of anti-inflammation reaction was decreased. 4. EXP group I showed more intensive inflammation than control group.

• Progress in Superconductivity
• /
• 제9권2호
• /
• pp.167-172
• /
• 2008

We fabricated $YBa_2Cu_3O_{7-x}$(YBCO) films on (00l) $LaAlO_3$ substrates prepared by metal organic deposition(MOD) method using trifluoroacetate(TFA) solution. The films with various thicknesses were prepared by repeating the dip-coating and calcining processes. The effects of film thickness on phase formation, microstructures, and critical properties were evaluated by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The microstructure and resultant critical current($I_C$) and critical current density($J_C$) varied remarkably with film thickness: The ($I_C$) value increased from 39 to 160 A/cm-width as the number of coatings increased from one to four, while the corresponding $J_C$ was measured to be in the range of $0.84-1.21\;MA/cm^2$. Both the $I_C$ and $J_C$ decreased when an additional coating was applied due to microstructural degradation, indicating that the optimum thickness is in the range of $1.1-1.8\;{\mu}m$. The possible cause for the decrease in the $I_C$ and $J_C$ value for film thicker than $1.8\;{\mu}m$ include non-uniform thickness, increased surface roughness, and the poor formability of the YBCO phase and texture arising from the insufficient heat treatment time with respect to the increased thickness.

• 공업화학
• /
• 제23권3호
• /
• pp.266-270
• /
• 2012

무수물인 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA)에 2,2'-bis(trifluoromethyl)benzidine (TFB), 2,2'-bis(3-aminophenyl)hexafluoropropane (BAFP), 2,2'-bis(3-amino-4-methylphenyl)hexafluoropropane (BAMF), bis(3-aminophenyl) sulfone (APS), p-xylyenediamine (p-XDA), 및 m-xylyenediamine (m-XDA) 등 6종류의 각각 다른 아민 단량체를 이용하여 폴리이미드(PI) 필름을 제조하였다. 얻어진 무색 투명한 PI필름은 무수물과 아민을 반응시켜 폴리아믹산(PAA)을 합성한 후, 용액 캐스팅에 의한 열처리 과정을 통해 얻었다. Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermo-mechanical analysis (TMA)를 이용하여 열적 성질을 측정하였고, universal tensile machine (UTM)을 이용하여 기계적 성질을 조사하였으며, 자외선/가시광선 분광광도계(UV-vis.)와 색차계를 이용하여 광학적 성질을 각각 확인하였다. 제조된 모든 필름들은 무색 투명하여 0.98~2.76 사이의 노란색 지수를 보였으며, 25.73~55.23 $ppm/^{\circ}C$사이의 열 팽창 계수를 나타냈다.

• 공업화학
• /
• 제25권4호
• /
• pp.414-417
• /
• 2014

습식제련 기술을 통한 Ga의 재활용을 위해 고결정성 GaN으로 구성되어 있는 LED 공정스크랩의 침출 거동을 연구하였다. 고결정성 GaN은 산성 및 염기성 조건에서 매우 안정하여 침출이 어려운 물질로 알려져 있다. 따라서, 본 연구에서는 볼밀링을 통해 원료와 $Na_2CO_3$를 1:1 비율로 섞은 후 관상로를 이용해 $1000-1200^{\circ}C$에서 열처리 하여 산화물로의 상변화를 유도하였다. 열처리 결과로써, $1100^{\circ}C$에서 GaN은 약 73 wt%의 Ga을 포함하는 산화물로 상변화 되었다. 이러한 열처리 샘플은 $100^{\circ}C$ 4 M HCl에서 96%의 높은 침출률을 나타냈다.

• 한국주조공학회지
• /
• 제38권4호
• /
• pp.75-81
• /
• 2018

This study examined the effect of the CaMgSn ternary phase on the aging response of the Mg-Sn-Zn alloy. The results revealed that the CaMgSn ternary phase formed in rod-like or needle-like shapes in Mg-3Zn-0.3Ca-xSn (x=1.5, 3, and 5 wt%) alloys and its size decreased as the Sn content increased from 1.5 wt% to 5 wt%. The Mg-3Zn-0.3Ca-5Sn alloy with a relatively fine CaMgSn phase was subjected to solution heat treatment and an aging process. Both the Mg-5Sn-3Zn-0.3Ca and Mg-5Sn-3Zn (base alloy) alloys had similar peak hardness values throughout all aging temperatures but the time-to-peak hardness in the Mg-5Sn-3Zn-0.3Ca alloy was 24-36 hours-earlier than that in the base alloy. Precipitates in the Mg-5Sn-3Zn-0.3Ca alloy were more refined than those in the Mg-5Sn-3Zn alloy and were mostly formed on basal planes. The $Mg_2Sn$ phase formed in either plate-like or rod-like shapes in the Mg-5Sn-3Zn alloy, whereas block-shaped $Mg_2Sn$ particles also formed in the Mg-5Sn-3Zn-0.3Ca alloy.

• 한국자기학회지
• /
• 제5권1호
• /
• pp.48-53
• /
• 1995

동시 열진공증착한 Ag-Co 미세입상 합금박막의 구조, 자기적 성질 및 거대자기저항 현상에 관하여 연구하였다. 증착된 상태에서 합금박막은 과포화된 Ag 기지와 석출된 Co 입자들이 공존하는 준안정한 fcc 구조를 이루고 있다. Co의 양이 20에서 55 at.%로 증가함에 따라 Ag 기지의 입자크기는 평균 147에서 $67{\AA}$으로 감소하였고 Ag 기지에 Co의 고용량은 2.5에서 6.7%로 증가하였다. 25 at.% 이하의 조성을 갖는 합금박막은 주로 초상자성 특성을 보였으며 그 이상의 조성에서는 초상자성과 강자성이 혼합된 거동을 보였다. 증착된 상태의 30 at.% 합금 박막에서(상온, 10 kOe) 최대 19%의 자기저항비를 얻었다. 증착된 상태에서 대부분의 코발트가 석출되어 있기 때문에 Cu-Co계와는 달리 열처리에 의해 MR비의 증가는 보이 지 않았다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.423-428
• /
• 2013

Porous YSZ ceramics are fabricated using 3 mol% yittria-stabilized zirconia (3YSZ) and NiO with different particlesizes (0.6 and 7 ${\mu}m$). Nickel oxide (NiO) is added to the YSZ powder as a pore former with different amounts(40, 50, and 60 vol%) and at different sintering temperatures (1350 and $1400^{\circ}C$) are applied in order to evaluate the temperature effects on the pore and mechanical properties. Heat treatment is conducted after sintering at $700^{\circ}C$ in $H_2$ for the NiO reduction process; then, Ni is removed using a $HNO_3$ etchant solution. According to the NiO contentand sintering temperatures, 41-67% porous YSZ ceramic is obtained and the flexural strength increases, while the porosity decreases with an increasing sintering temperature. The optimum flexural strength ($136.5{\pm}13.4MPa$) and porosity (47%) for oxygen transport porous YSZ membrane can be obtained with 40 vol% of 7 ${\mu}m$ NiO particle at a sintering temperature of $1350^{\circ}C$.

• 한국재료학회지
• /
• 제24권7호
• /
• pp.370-374
• /
• 2014

Inorganic pigments have high thermal stability and chemical resistance at high temperature. For these reasons, they are used in clay, paints, plastic, polymers, colored glass and ceramics. $CoAl_2O_4$ nano-powder was synthesized by reverse-micelle processing the mixed precursor(consisting of $Co(NO_3)_2$ and $Al(NO_3)_3$). The $CoAl_2O_4$ was prepared by mixing an aqueous solution at a Co:Al molar ratio of 1:2. The average particle size, and the particle-size distribution, of the powders synthesized by heat treatment (at 900; 1,000; 1,100; and $1,200^{\circ}C$ for 2h) were in the range of 10-20 nm and narrow, respectively. The average size of the synthesized nano-particles increased with increasing water-to-surfactant molar ratio. The synthesized $CoAl_2O_4$ powders were characterized by X-ray diffraction analysis(XRD), field-emission scanning electron microscopy(FE-SEM) and color spectrophotometry. The intensity of X-ray diffraction of the synthesized $CoAl_2O_4$ powder, increased with increasing heating temperature. As the heating temperature increased, crystal-size of the synthesized powder particles increased. As the R-value(water/surfactant) and heating temperature increased, the color of the inorganic pigments changed from dark blue-green to cerulean blue.

• Korean Chemical Engineering Research
• /
• 제54권2호
• /
• pp.268-273
• /
• 2016

탄소 폼의 기계적 강도를 향상시키기 위하여, PVA 용액에 다양한 함량의 카본블랙 및 메조페이스 핏치를 첨가하여 폴리우레탄 폼에 함침한 후 열처리를 통하여 카본블랙이 첨가된 탄소 폼을 제조하였다. 탄소 폼의 셀 벽의 두께는 첨가된 카본블랙의 함량에 따라 조절되며, 탄소 폼의 압축강도는 셀 벽의 두께가 증가함에 따라 증가되는 것이 확인되었다. 이에 따라 핏치 함량 대비 5 wt%의 카본블랙을 탄소 폼에 첨가하였을 때 가장 높은 $0.44g/cm^3$의 겉보기 밀도에서 가장 높은 $0.22{\pm}0.05MPa$의 압축강도가 얻어졌다. 그러나 탄소 폼의 열전도도는 카본블랙이 첨가되었을 때 오히려 감소하는 것으로 나타났다. 이러한 결과는 탄소 폼에 카본블랙 첨가로 인한 흑연 층간 간격($d_{002}$)의 증가로 탄소 폼의 열전도도가 오히려 감소되는 것으로 나타났다.