• Journal of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.51-59
• /
• 1970

The apparent molal volumes(${\phi}_v$) of the homologous salts $RNH_3Cl$, where R varies from methyl-($CH_{3^-}$) to n-butyl-(n-$C_4H_{9^-}$) in a series of methanol-water mixtures have been determined at 30$^{\circ}C$ by means of a float method to fifth decimal places down to 0.01 m. The values of ${\phi}_r$ extrapolated to infinite dilution give partial molal volumes $\bar{V}^{\circ}$which varies considerably in accordance with the solvent composition. that is, mole fraction of methanol. The experimental results are discussed in terms of the varying size and charge effect, hydrophobic nature of the solute species, and also the additivity relationship between successive homologous and the structure of the binary solvent. The results indicate that at 0.1 mole fraction methanol the enhanced structuredness of water cause a minimum in the partial molal volumes of cations $\bar{V}^{\circ}_+$, while at 0.4 mole fraction the solvent structure is such that the free volume is a minimum but the effect of electrostriction is a maximum.

• Journal of the Korean Chemical Society
• /
• v.39 no.8
• /
• pp.666-671
• /
• 1995

The conformational properties of poly(ethylene oxide) (PEO) in aqueous solutions are studied by viscometry with respect to the water structure perturbing capabilities of a series of urea solutes at $16^{\circ}C$, and experiments for the effect of amounts of urea and methylurea on PEO at 16 and $25^{\circ}C$ are also performed. The results show that the chain expansion, by ureas, of PEO of $1.0{\times}10^5$ molecular weight at $16^{\circ}C$ is similar to that of PEO of $8.0{\times}10^3$ molecular weight at $25^{\circ}C$ with respect to the water structure perturbation. Urea and methylurea make the PEO chain expand by the perturbation of water structure around PEO and by the hydrophobic interaction between methylurea and PEO, respectively. PEO of $1.0{\times}10^5$ molecular weight has hydrophobic sites on it, which are roughly classified into two parts; one is the inner hydrophobic groups which can interact between themselves (intramolecular hydrophobic interaction) and prevails at $16^{\circ}C$, and the other is the outer, exposed hydrophobic groups which can interact with the added hydrophobic solute (intermolecular hydrophobic interaction) and prevails at $25^{\circ}C.$

• Economic and Environmental Geology
• /
• v.37 no.4
• /
• pp.383-389
• /
• 2004

Understanding flow pattern of water and solute in subsurface is essential for the reduction and prevention of contamination of soil and groundwater and for the investigation and remediation of contaminated site. The objective of this study is to examine the infiltration pattern in a soil developed from the Jurassic granite using (Brilliant Blue FCF $C_{37}H_{34}N_{2}Na_{2}O_{9}S_{3}$), the nonfluorescent and nontoxic food dye. All image processing was conducted using geographic image processing software, ER Mapper, Version 6.2. The dye coverage was determined by counting the stained pixels in the photographs (80${\times}$80cm, 80TEX>${\times}$5cm) for the vertical and horizontal view. A homogeneous matrix flow occurred in the A horizon with weak, medium granular structure and fingering at the interface of finer-textured A horizon and coarser-textured C horizon. Pegmatitic vein originated from the granite and plant root in C horizon induced preferential flow.

• The Korean Journal of Physiology and Pharmacology
• /
• v.8 no.3
• /
• pp.117-127
• /
• 2004

The heterodimeric amino acid transporter family is a subfamily of SLC7 solute transporter family which includes 14-transmembrane cationic amino acid transporters and 12-transmembrane heterodimeric amino acid transporters. The members of heterodimeric amino acid transporter family are linked via a disulfide bond to single membrane spanning glycoproteins such as 4F2hc (4F2 heavy chain) and rBAT $(related\;to\;b^0,\;^+-amino\;acid\;transporter)$. Six members are associated with 4F2hc and one is linked to rBAT. Two additional members were identified as ones associated with unknown heavy chains. The members of heterodimeric amino acid transporter family exhibit diverse substrate selectivity and are expressed in variety of tissues. They play variety of physiological roles including epithelial transport of amino acids as well as the roles to provide cells in general with amino acids for cellular nutrition. The dysfunction or hyperfunction of the members of the heterodimeric amino acid transporter family are involved in some diseases and pathologic conditions. The genetic defects of the renal and intestinal transporters $b^{0,+}AT/BAT1\;(b^{0,+}-type\;amino\;acid\;transporter/b^{0,+}-type\;amino\;acid\;transporter\;1)$ and $y^+LAT1\;(y^+L-type\;amino\;acid\;transporter\;1)$ result in the amino aciduria with sever clinical symptoms such as cystinuria and lysin uric protein intolerance, respectively. LAT1 is proposed to be involved in the progression of malignant tumor. xCT (x-C-type transporter) functions to protect cells against oxidative stress, while its over-function may be damaging neurons leading to the exacerbation of brain damage after brain ischemia. Because of broad substrate selectivity, system L transporters such as LAT1 transport amino acid-related compounds including L-Dopa and function as a drug transporter. System L also interacts with some environmental toxins with amino acid-related structure such as cysteine-conjugated methylmercury. Therefore, these transporter would be candidates for drug targets based on new therapeutic strategies.

• Journal of Arbitration Studies
• /
• v.9 no.1
• /
• pp.291-322
• /
• 1999

The world of today faces a radical change, a new revolution, by the spread of the Internet. It is used not only for advertising but also for the exclusive rights in the field of information and communication, in add to the way of developing everyday our lives with world news, home-shopping, on-line education and so on. Actually, since the Internet Domain's Name(IDN) is unique over the world, the individual and the companies which provide information through the Internet have a keen competition to make a good IDN to memorize and organize all available information provided them. As a result, there are an increasing number of the cases where one company files suit against another for the validity of it's IDN so the policy to arbitrate and solute the cases is required. This paper is going to introduce the structure and the system of management for IDN. It will also discuss the efficient management of IDN, various case analysis of the dispute restraint and solutions, and the movement of improving the management procedure of IDN in WIPO. So we suggest to examine common disputes among IDN uses and solution methods for future problem at EC times. Therefore we have to establish the dispute solution system. Here are the two methods : one is that to establish a dispute solution organization. This organization which can conduct the new dispute solution procedure differs from the existing legislation system. The other is that to establish a dispute solution procedure i.e. the various dispute solution procedure for efficient dispute solution : council, inspection, mediation and arbitration. This procedure is conducted on-line due to features of the IDN disputes, also along with the current legislation system and the International dispute solution procedure. Because there is possibility the IDN disputes usually are connected with other countries. As there is no specific disputes solution procedure so far, we have to wait while development occurs that also striving to be coherent with and between the domestic and International solution procedure by helping to establish the International dispute solution procedure.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.633-639
• /
• 2008

Polysulfone membranes were prepared via the phase inversion process. Toluene was added as a nonsolvent additive in the casting solution containing a mixture of polysulfone and n-methylpyrrolidone. When prepared via the diffusion-induced process using isopropanol as a precipitation nonsolvent, the solidified membranes revealed a similar asymmetric structure irrespective of the addition of toluene, presenting both a dense skin layer and a sponge-like support layer. The added toluene played a role of enhancing liquid-liquid phase separation of the casting solution, and skin layer thickness of a prepared membrane increased with toluene content in the casting solution. On membrane performance, the solute rejection showed a uniform behavior irrespective of the addition of toluene. However, in spite of the significant increase in dense skin layer thickness, the water permeation through the membrane prepared with 60 wt% toluene revealed five times as much flux, compared with that of the membrane prepared without toluene additive.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.3
• /
• pp.103-114
• /
• 2002

Knowledge of soil water retention characteristic is essential for many problems involving water flow and organic solute transport in unsaturated soils. A physico-empirical approach based on the translation of the particle-size distribution (PSD) into a corresponding water retention curve has been accomplished by others using the concept that the pore-size distribution is directly related to PSD. This approach implies that details of a PSD curve may affect the estimation of water retention characteristic (WRC). To determine whether the WRC estimation using the Arya-Paris model could be affected by the selection of a PSD model, four PSD models with one to four fitting parameters were used. The Jaky model with only one fitting parameter had greater WRC estimation ability than other models with greater number of fitting parameters. The better performance of the Jaky model may be explained by the effect of soil structure in field soils.

• Journal of Technologic Dentistry
• /
• v.22 no.1
• /
• pp.69-78
• /
• 2000

The microstructure and corrosion behavior of commercially dental casting gold alloys were investigated to clarify the effect of burn-out temperature and cooling rate. In the case of water quenching after casting, only the αphase, which is typical dendritic microstructure of golda alloy, was detected. However, the precipitates along the grain boundary were detected only at the slow cooling rate and they increased inversely proportional to the burn-out temperature. This might be due to the time difference which solute atom could diffuse. EPMA and SEM results also demonstrated that the precipitate should be lamellar structure consisted of Ag rich phase(${\alpha}_1$) and Cu rich phase (${\alpha}_2$). In terms of corrosion, the galvanic coupling was formed due to the difference of composition between precipitates and matrix at the slow cooling rate. In the case of water quenching, the critical current density($i_p$) which indicate the degree of corrosion was lowest at $650^{\circ}C$ and below the burnout temperature, $i_p$ increased with it because of the effect of grain boundary segregation. But above the temperature, $i_p$ increased with it. This may be due to the strain field effect by residual thermal stress.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.139-142
• /
• 2003

Microwave dielectric properties of $Ca(Li_{1/4}Nb_{3/4})O_3-CaTiO_3$ ceramic systems were investigated with calcination temperatures and amounts of $CaTiO_3$ in the range of 0.2 to 0.4mol. $Ca(Li_{1/4}Nb_{3/4})O_3$ ceramics having orthorhombic crystal structure could be synthesized at $750^{\circ}C$ and sintered well at $1250^{\circ}C$. They showed the dielectric constant of 26, quality factor($Q{\times}f_o$) of 13,000 and temperature coefficient of resonant frequency(${\tau}_f$) of $-49{\pm}2ppm/^{\circ}C$ With adding the $CaTiO_3$ amount the dielectric constant and ${\tau}_f$ increased due to the solute of $CaTiO_3$ but the quality factor decreased. The 0.7$Ca(Li_{1/4}Nb_{3/4})O_3-0.3CaTiO_3$ ceramic showed the dielectric constant of 44, quality factor($Q{\times}f_o$) of 12,000 and ${\tau}_f$ of $-9{\pm}1ppm/^{\circ}C$.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1394-1402
• /
• 2018

This study investigates the mechanism of MnS precipitation on $Al_2O_3-SiO_2$ inclusions during the solidification of non-oriented silicon steel, especially the influence of the phase structures and sizes of the oxides on the MnS precipitation, by scanning electron microscopy and transmission electron microscopy coupled with energy dispersive spectrometry. The investigation results show that MnS tends to nucleate on submicron-sized $Al_2O_3-SiO_2$ inclusions formed by interdendritic segregation and that it covers the oxides completely. In addition, MnS can precipitate on micron-sized oxides and its precipitation behavior is governed by the phase structure of the oxides. The MnS embryo formed in a MnO-containing oxide can act as a substrate for MnS precipitation, thus permitting further growth via diffusion of solute atoms from the matrix. MnS also precipitates in a MnO-free oxide by the heterogeneous nucleation mechanism. Furthermore, MnS is less prone to precipitation in the $Al_2O_3$-rich regions of the $Al_2O_3-SiO_2$ inclusions; this can be explained by the high lattice disregistry between MnS and $Al_2O_3$.