• Restorative Dentistry and Endodontics
• /
• 제16권1호
• /
• pp.87-105
• /
• 1991

The purpose of this experiment was to measure the leaking and solubility of commonly used dental restorative materials - Silux plus (CS), Hi-pol (CH), Clearfil F-II, Fissureseal (FS), Glass-Ionomer cement Fuji Type II (GI), Amalgam Cavex 68 (AM), Zinc Phosphate Cement (ZP) and gutta-percha (GP) and investigate the relation between the solubility and marginal leakage. Disc-shape specimens were fabricated with each material and dipped into deionized water, 0.01M lactic acid and 0.005M KOH solution, thus the total ionic concentrations in each solution was measured with ion chromatograph after 1, 3, and 7 days, respectively. For the solubility test, each specimen was immersed in 0.001M and 0.01M lactic acid for 24 hours, respectively and total weight loss was calculated. Also, Zn leaking through the margin of restorations was measured. The obtained results were as follows: 1. The amounts of eluted ion from the eight materials were most in 0.01M lactic acid and least in deionized water. 2. Of the eight materials, the fluoride release was greatest for glass ionomer cement (GI) in 0.01 M lactic acid after 7 days. 3. In analysis of the divalent cation, Mg was eluted most for zinc phosphate cement (ZP) and Ca for Clearfil F-II (CF) in 0.01M lactic acid after 7 days. 4. In analysis of transition metals, Cu and Zn were detected only. 5. The solubility rate of eight materials was greater in 0.01M lactic acid than in 0.001M for 24 hours, for zinc phosphate cement (ZP) the rate was greatest (5.4%) in 0.001M lactic acid, and amalgam least (0.01%). 6. The Zn concentration of restorative material with Z.P.C base was greater in 0.01M lactic acid than in 0.001M lactic acid.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.194-200
• /
• 2020

Perylene bisimide derivatives are developed for red organic phosphor because of their advantages, such as excellent luminous efficiency and high thermal stability. Despite these advantages, they have poor solubility characteristics in organic solvents and short emission wavelength as red organic phosphor for hybrid light-emitting diodes (LEDs). In this study, we prepared terrylene bisimide using a coupling reaction and swallow-tail imide group, which has excellent solubility. The structures and properties of swallow-tail terrylene bisimide (9C) were analyzed using ¹H-nuclear magnetic resonance (¹H-NMR), Fourier-transform infrared (FT-IR), UV/Vis spectroscopy, and thermal gravimetric analysis (TGA). The maximum absorption wavelength of (9C) in the UV/Vis spectrum was 647 nm, and the maximum emission wavelength was 676 nm. In the TGA, (9C) demonstrated good thermal stability with less than 5 wt% weight loss up to 415℃. In the solubility test, (9C) has a good solubility of more than 5 wt% in chloroform and dichloromethane. When the compounds (9C) were mixed with PMMA (polymethly methacrylate), the films showed peaks at 680 nm in the PL spectra. The results verify the suitability of (9C) as a red organic phosphor for hybrid LEDs.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.86-92
• /
• 2019

Although perylene bisimide derivatives have advantages such as excellent thermal stability and high luminance efficiency, they have poor solubility characteristics in organic solvents. In this research, in order to improve the solubility characteristics, we prepared perylene bisimide derivatives (1C) and (2C) with swallow-tail substituted imide, which is known to lead to excellent solubility. The structures and properties of swallow-tail perylene bisimide (1C) and (2C) were analyzed by $^1H-NMR$, FT-IR, UV/Vis spectroscopy, and thermogravimetric analysis (TGA). The maximum absorption wavelengths of (1C) and (2C) in the UV/Vis spectrum were 558 nm and 556 nm, respectively, and the maximum emission wavelengths were 602 nm and 600 nm, respectively. In the TGA, (1C) demonstrated good thermal stability with less than 5 wt% weight loss up to $242^{\circ}C$. In the solubility test, (1C) and (2C) exhibited solubilities of more than 5 wt% in chloroform, ethyl acetate, and dimethylformamide, but not in methanol. When the compounds (1C) and (2C) were mixed with PMMA (polymethyl methacrylate), thin films showed peaks at 679 nm and 677 nm, respectively, in the photoluminescence spectra. (1C) was found to be a possible candidate as red organic phosphor for hybrid LEDs.

• 대한토목학회논문집
• /
• 제29권2B호
• /
• pp.207-212
• /
• 2009

광물촉매에 의한 Fenton 산화에서 모래에 흡착된 phenanthrene을 대표적인 계면활성제인 SDS와 Tween 80을 사용하여 물질이동 영향을 조사하였다. 계면활성제 주입에 따라 액상과 고체상 사이 또는 산화물 표면으로 phenanthrene이 물질이동하였으며, 계면활성제 농도가 증가할수록 phenanthrene의 apparent solubility는 증가하는 경향을 나타내었다. Tween 80은 apparent solubility가 증가 하더라도, 계면활성제가 분해에 scavenger 작용을 하여 모래에 흡착된 phenanthrene 산화에는 영향을 주지 않았다. SDS를 주입하였을 때, Fenton-like 반응에서 SDS와 goethite가 착물을 형성하여 과산화수소 소모량을 지연시켰의며, 계면활성제를 주입 하지 않았을 때 보다 SDS 32 mM를 주입하였을 때 phenanthrene 처리효율이 증가하였다. 그러므로 최적농도의 SDS 주입은 액상과 고체상 사이 또는 산화물 표면에 phenanthrene 산화를 위한 적당한 조건을 제공 해주며, 과산화수소 소모량을 줄이고, phenanthrene 처리효율을 개선시킬 것이다.

• 대한화장품학회지
• /
• 제25권1호
• /
• pp.120-136
• /
• 1999

A newly synthesized polyhydroxy aromatic compound(LG 106w) has good skin lightening effect. Inclusion complexation of LG 106w with $\beta$-cyclodextrin and its hydroxypropyl and dimethyl derivatives was studied by the solubility method, scanning electron microscopy and differential thermal analysis. A relationship between host and guest was clearly reflected in the magnitude of the stability constant(DM-$\beta$> HP-$\beta$>$\beta$ -cyclodextrin). Formulation problems, which resulted from its very low solubility in aqueous solution, were resolved by the inclusion formation. LG 106W from inclusions is much more water-soluble than pure one. The improvement of pH and temperature stability correlated with the increased solubility was also observed. Inclusion complex of LG 106w had similar activity to pure LG 106w on the inhibition of melanin synthesis in B-16 melanoma cell but showed lower irritation on cultured cell test in vitro. According to the results, cyclodextrins might be one of the reliable candidates for improving the availability of LG 106w.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 춘계학술발표회 초록집
• /
• pp.97-97
• /
• 1999

Dross formation in the zinc bath is inevitable under any condition as long as coating process on steel strip continues. Thus, bath aluminum and temperature are precisely managed to suppress the increase of dross. Also, excessive dross for normal coating process is generally eliminated physically by bubbling and skimming. Total amount of dross in the bath can be sometimes high enough to cause coating defect. On the other hand, local concentration of dross can make coating defect even with satisfactory level of total amount of dross. Reduction of dross in the bath was attempted by using ceramic foam filter made of mainly alumina. Dross in molten zinc was almost reduced to the levels of solubility of iron and aluminum in molten zinc at $450~460^{\circ}C$. Their solubility levels were confirmed by thermodynamic calculations or DEAL program. Two kinds of filters were tested for dross reduction. One was #20 ppi, porous per inch, and the other #30 ppi filter. Both were effective in reducing the bath dross to the solubility levels at the static state. Bath iron was reduced by 24 wt% and 19 wt% with #20 filter, and by 35 wt% and 29 wt% with #30 filter for GI and GA pot, respectively. Also, ceramic foam filter did not make any harm to the zinc bath composition after filtering test.

• Restorative Dentistry and Endodontics
• /
• 제41권3호
• /
• pp.189-195
• /
• 2016

Objectives: A variety of root canal sealers were recently launched to the market. This study evaluated physicochemical properties, biocompatibility, and sealing ability of a newly launched resin-based sealer (Dia-Proseal, Diadent) compared to the existing root canal sealers (AHplus, Dentsply DeTrey and ADseal, Metabiomed). Materials and Methods: The physicochemical properties of the tested sealers including pH, solubility, dimensional change, and radiopacity were evaluated. Biocompatibility was measured using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. For microleakage test, single-rooted teeth were instrumented, and obturated with gutta-percha and one of the sealers (n = 10). After immersion in 1% methylene blue solution for 2 weeks, the specimens were split longitudinally. Then, the maximum length of staining was measured. Statistical analysis was performed by one-way analysis of variance followed by Tukey test (p = 0.05). Results: Dia-Proseal showed the highest pH value among the tested sealers (p < 0.05). ADseal showed higher dimensional change compared to AHplus and Dia-Proseal (p < 0.05). The solubility values of AHplus and Dia-Proseal were similar, whereas ADseal had the lowest solubility value (p < 0.05). The flow values of sealer in increasing order were AHplus, DiaProseal, and ADseal (p < 0.05). The radiopacity of AHplus was higher than those of ADseal and Dia-Proseal (p < 0.05). The cell viability of the tested materials was statistically similar throughout the experimental period. There were no significant differences in microleakage values among the tested samples. Conclusions: The present study indicates that Dia-Proseal has acceptable physicochemical properties, biocompatibility, and sealing ability.

• Bulletin of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.749-754
• /
• 2008

To increase the solubility of sibutramine freebase, the solid dispersion was prepared using a fluid-bed granulator. The solid dispersion containing sibutramine freebase was characterized by differential scanning calorimetry (DSC) and powder X-ray diffraction (XRD). After filling the sibutramine solid dispersion in the gelatin hard capsule, we performed in vitro dissolution test, the stability test under accelerated conditions and pharmacokinetic study in beagle dogs. The DSC and XRD data showed that sibutramine solid dispersion would be amorphous state. The dissolution rate of sibutramine solid dispersion was significantly increased about 70% than sibutramine freebase. The stability of sibutramine solid dispersion capsules was equivalent or above to commercial product of sibutramine. In beagle dogs, the sibutramine solid dispersion showed equivalent pharmacokinetic behavior with commercial product of sibutramine hydrochloride. In conclusion, the solid dispersion system provided a possible way to overcome the low solubility of sibutramine freebase, and the sibutramine solid dispersion can be a bioequivalent with the commercial product in humans.

• 대한소아치과학회지
• /
• 제49권4호
• /
• pp.379-391
• /
• 2022

이 연구는 premixed MTA 제재와 기존 치수복조제의 경화 전, 후의 pH 값 그리고 칼슘, 황, 스트론튬 이온의 유리량, 용해도를 비교했다. 사용된 재료는 다음과 같다 : 레진 강화형 칼슘실리케이트(TheraCal LC^®; TLC), 레진 강화형 수산화칼슘(UBP, Ultra-Blend^TM plus), 2종류의 premixed MTA(Endocem MTA^® premixed regular [EMPR] and Well-Root^TM PT [WRP]). 각 재료의 시편은 경화 전, 경화 후 2군으로 나누어 준비한 뒤 증류수에 보관하였다. pH, 용해도를 측정하였으며 ICP-AES를 이용한 칼슘, 황, 스트론튬의 3가지 이온 유리량을 측정하였다. 경화 후 군에서 TLC와 UBP의 pH 값은 감소했다. 그러나 premixed MTA 재료의 pH 값은 증가했다. TLC는 다른 재료와 비교하여 스트론튬 이온 유리량이 더 많았다. 동시에 EMPR에서 황이온 유리량이 높았다(p < 0.05). 경화 후 군에서 칼슘 이온 방출은 두 종류의 premixed MTA에서 더 높았다(p < 0.05). 경화 후 군에서 용해도는 Kruskal-Wallis 서 test를 이용하여 통계분석하였고 Mann-Whitney U test를 이용하여 사후검정하였다. 결론적으로 레진 강화형 칼슘 실리케이트 시멘트, 레진 강화형 수산화칼슘 시멘트, 2종류의 premixed MTAs 모두 경화 후 알칼리성 pH 값과 낮은 용해도를 가지고 있었으며 다양한 이온을 유리했다.

• 한국응용곤충학회지
• /
• 제31권2호
• /
• pp.182-189
• /
• 1992

신규 설충성물질 개발의 전제조건이 되는 용매의 선택을 위하여, 아세톤의 9종의 유기용매를 수종의 곤충에 대한 독성과 식이식물 및 화합물의 용해성에 미치는 영향을 엽침지법과 분무법으로 평가하였다. 각종 용매의 공시충에 대한 치사독성과 용매의 이화학적인 성질과는 뚜렷한 상관관계가 보이지는 않았으나, 분무법 처리시 벼멸구의 경우 밀도가 높을수록, 배추좀나방의 경우에는 증기압이 낮을수록 공시충에 대한 치사독성이 높았으나, 비등점, 쌍극자모멘트, 유전율, 표면장력, 점도와는 상관관계를 보이지 않았다. 처리 방법에 있어서는 분무처리가 엽침지법보다 더 높은 치사독성을 나타내었다. 약해와 용매의 이화학적 성상 역시 명확한 상관관계를 보이지 않았으나, 엽침지법의 경우 수도에 있어서 유전율이 낮을수록 약해가 심하였으며, 분무법 처리시에는 쌍극자 모멘트가 높을수록 약해가 심하였으나 기타의 이화학적 성상과는 상관관계를 보이지 않았다. 엽침지처리가 분무처리에 비하여 강한 약해를 유발하였다. 합성 화합물과 식물체 메탄올 추출물은 아세톤에 대한 용해성이 양호하여 생물검정시 5% 아세톤수용액이 다량의 화합물을 검정하는데 적합하였다.