• 한국유가공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.59-60
• /
• 2002

Edible films such as wax coatings, sugar and chocolate covers, and sausage casings, have been used in food applications for years$^{(1)}$ However, interest in edible films and biodegradable polymers has been renewed due to concerns about the environment, a need to reduce the quantity of disposable packaging, and demand by the consumer for higher quality food products. Edible films can function as secondary packaging materials to enhance food quality and reduce the amount of traditional packaging needed. For example, edible films can serve to enhance food quality by acting as moisture and gas barriers, thus, providing protection to a food product after the primary packaging is opened. Edible films are not meant to replace synthetic packaging materials; instead, they provide the potential as food packagings where traditional synthetic or biodegradable plastics cannot function. For instance, edible films can be used as convenient soluble pouches containing single-servings for products such as instant noodles and soup/seasoning combination. In the food industry, they can be used as ingredient delivery systems for delivering pre-measured ingredients during processing. Edible films also can provide the food processors with a variety of new opportunities for product development and processing. Depends on materials of edible films, they also can be sources of nutritional supplements. Especially, whey proteins have excellent amino acid balance while some edible films resources lack adequate amount of certain amino acids, for example, soy protein is low in methionine and wheat flour is low in lysine$^{(2)}$. Whey proteins have a surplus of the essential amino acid lysine, threonine, methionine and isoleucine. Thus, the idea of using whey protein-based films to individually pack cereal products, which often deficient in these amino acids, become very attractive$^{(3)}$. Whey is a by-product of cheese manufacturing and much of annual production is not utilized$^{(4)}$. Development of edible films from whey protein is one of the ways to recover whey from dairy industry waste. Whey proteins as raw materials of film production can be obtained at inexpensive cost. I hypothesize that it is possible to make whey protein-based edible films with improved moisture barrier properties without significantly altering other properties by producing whey protein/lipid emulsion films and these films will be suitable far food applications. The fellowing are the specific otjectives of this research: 1. Develop whey protein/lipid emulsion edible films and determine their microstructures, barrier (moisture and oxygen) and mechanical (tensile strength and elongation) properties. 2. Study the nature of interactions involved in the formation and stability of the films. 3. Investigate thermal properties, heat sealability, and sealing properties of the films. 4. Demonstrate suitability of their application in foods as packaging materials. Methodologies were developed to produce edible films from whey protein isolate (WPI) and concentrate (WPC), and film-forming procedure was optimized. Lipids, butter fat (BF) and candelilla wax (CW), were added into film-forming solutions to produce whey protein/lipid emulsion edible films. Significant reduction in water vapor and oxygen permeabilities of the films could be achieved upon addition of BF and CW. Mechanical properties were also influenced by the lipid type. Microstructures of the films accounted for the differences in their barrier and mechanical properties. Studies with bond-dissociating agents indicated that disulfide and hydrogen bonds, cooperatively, were the primary forces involved in the formation and stability of whey protein/lipid emulsion films. Contribution of hydrophobic interactions was secondary. Thermal properties of the films were studied using differential scanning calorimetry, and the results were used to optimize heat-sealing conditions for the films. Electron spectroscopy for chemical analysis (ESCA) was used to study the nature of the interfacial interaction of sealed films. All films were heat sealable and showed good seal strengths while the plasticizer type influenced optimum heat-sealing temperatures of the films, 130$^{\circ}$C for sorbitol-plasticized WPI films and 110$^{\circ}$C for glycerol-plasticized WPI films. ESCA spectra showed that the main interactions responsible for the heat-sealed joint of whey protein-based edible films were hydrogen bonds and covalent bonds involving C-0-H and N-C components. Finally, solubility in water, moisture contents, moisture sorption isotherms and sensory attributes (using a trained sensory panel) of the films were determined. Solubility was influenced primarily by the plasticizer in the films, and the higher the plasticizer content, the greater was the solubility of the films in water. Moisture contents of the films showed a strong relationship with moisture sorption isotherm properties of the films. Lower moisture content of the films resulted in lower equilibrium moisture contents at all aw levels. Sensory evaluation of the films revealed that no distinctive odor existed in WPI films. All films tested showed slight sweetness and adhesiveness. Films with lipids were scored as being opaque while films without lipids were scored to be clear. Whey protein/lipid emulsion edible films may be suitable for packaging of powder mix and should be suitable for packaging of non-hygroscopic foods$^{(5,6,7,8,)}$.

• Korean journal of food and cookery science
• /
• v.17 no.1
• /
• pp.65-79
• /
• 2001

The effects of ${\alpha}$-chymotrypsin and trypsin treatments on the functional properties (degree of hydrolysis, solubility, and emulsifying capacity) of the soy protein isolate prepared from Jinpum soybean milk(JS milk) which has been developed as low lipoxidase-active soybean variety in Korea and extracted from commercially defatted soybean meal milk(DSM milk). The mixing ratios of JS milk to DSM milk were adjusted to 10:0, 7:3, and 5:5, respectively. The general quality attributes(yield, pH, titrable acidity, moisture contents, crude protein contents, color, textural properties, and sensory characteristics) of soybean cheese which has been prepared with the resulting soy protein hydrolysates were evaluated. Jinpum SPI was better subjected to trypsin than ${\alpha}$-chymotrypsin hydrolyses as indicated by better solubility and emulsifying capacity of the hydrolysates. The degree of hydrolysis and solubility of Jinpum SPI were higher than the soybean isolates from DSM milk. The increased ratios of DSM milk in the mixture resulted in the reduced yields and crude protein content along with the lowered titratable acidity while the pH values and moisture contents showed the opposite trends. In color characteristics, the increased amount of DSM milk brought about the significantly lower Hunter color reflectance values of lightness of the cheese products, along with the higher redness and total color difference value(ΔE). However, the enzyme treatment alone was not enough to cause any color differences. The increased ratios of DSM milk also caused the significantly lowered textural parameters such as hardness, adhesiveness and cohesiveness of the soybean cheese. Between the enzyme treatments, the ${\alpha}$-chymotrypsin treated samples resulted in the higher hardness and cohesiveness values of the products than those from the trypsin-treated ones. In organoleptic properties of the product, the better mouthfeel and overall quality scores were obtained from the trypsin treatments as compared with those from the ${\alpha}$-chymotrypsin ones. The mixing ratios of 10:0 and 7:3 were more favored than that of 5:5 as far as mouth-feel, yellowness and overall quality of the products were concerned. On the overall, the mixing ratio of 7:3(JS milk: DSM milk) and the trypsin treatment of the mixture was recommended for better manufacturing of high-quality soybean cheese.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.161-167
• /
• 2011

Recent popularity in mobile electronics requires higher standard on the mechanical strength of electronic packaging. Thus, the method of soldering between chip and substrate in electronic packaging process is changing from conventional method using intermetallic compound to a new method using organic solderability preservatives (OSP) in order to improve the stability and the reliability of final product. Since current OSPs have several serious problems like thermo-stability during packaging process, however, it is necessary to develop new OSPs having thermo-stability. The main purpose of this study is to develop various thermo-stable OSPs based upon poly(vinyl pyridine-co- methylmethacrylate) and to evaluate their anti-oxidation property protecting Cu pad, thermo-stability and solubility to acid- or alcohol-containing aqueous solution during pos-fluxing. All OSPs showed not only good anti-oxidation property, thermo-stability and solubility but also more advantages like low cost, less odor, and less hygroscopic.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.2
• /
• pp.323-329
• /
• 1995

For the effective utilization of dark meat separated as by-product from skip-jack canning, the dark meat concentrate(DPC) was prepared by removal of extractable materials with ethanol from dried dark meat. Dark meat protein hydrolysate(DPH) was prepared by the hydrolysis of DPC with ${\alpha}-chymotrypsin$. ${\alpha}-Chymotrypsin$ hydrolysed DPC to the extend of 79% during 10hr. The solubility over a pH range 1~12 showed similar trend on the both of DPH and DPC. The highest solubility was 81% on the DPH and was 36% on the DPC at pH 3. The lowest solubility was 65% on the DPH and was 22% on the DPC at pH 7. The content of total free amino acid was higher in the DPC than in the DPH, but the content of total essential free amino acid was higher in the DPH. Especially, the contents of taurine in the DPC and DPH were much higher than those of other amino acids. The result of sensory evaluation on the fish sauce analogue showed good taste, color and odor at the supplemented level of 8g DPH per 100ml of raw solution of fish sauce analogue and didn't show signifcaint difference compared with market fish sauce(p<0.05). On the preparation of surimi gel, 2% substitution of DPH for the supplemented starch was the most appropriate level.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.145-151
• /
• 2023

In order to extend shelf life for rockfish fillets by modified atmosphere packaging (MAP), different package atmospheres were compared in the product quality preservation. Firstly, CO₂ solubility was measured at 0, 5, 10, and 15℃ to be incorporated into the mathematical model to predict the volume and CO₂ concentration of the package at expected storage temperature. The CO₂ solubility given in Henry's constant decreased with temperature to be fitted with a linear equation. Then air packaging as control and four MAP conditions of 100 g fillets were prepared and stored for duration of 5 days at 10℃ to compare them in the quality preservation effect. Four MAP conditions employed were CO₂(60):O₂(30):N₂(10), CO₂(60):O₂(0):N₂(40), CO₂(30):O₂(30):N₂(40) andCO₂(30):O₂(0):N₂(70). MAP conditions with high CO₂ concentration inhibited total aerobic bacteria, and the conditions containing O₂ led to low TVB-N. MAP of CO₂(60):O₂(30):N₂(10) was found to be the best condition for rockfish fillet preservation considering total aerobic bacteria growth and nitrogenous volatiles production.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.8
• /
• pp.1153-1161
• /
• 2016

For prevention of moisture adsorption, the fermented red ginseng extract spherical granules were coated by using hydrophobic fractions. The hydrophobic parts were extracted from red ginseng such as the perfect soluble part in 90% ethanol (PSE) and non-soluble part in hot water (NSHW). The optimum operating conditions for making fermented red ginseng extract spherical granules coated with PSE were a feeding rate (FR) of 0.49 mL/min, atomization air pressure (AP) of 2.14 bar, and product temperature (PT) of $48.96^{\circ}C$., whereas conditions for granules coated with NSHW were a FR of 0.61 mL/min, AP of 2.75 bar, and PT of $46.30^{\circ}C$. The solubility of coated fermented red ginseng extract spherical granule was lower than that of not coated. The fermented red ginseng extract spherical granules coated with NSHW showed more preventative effects for moisture adsorption than those coated with PSE, although there were no differences in solubility and fluidity. In the sensory evaluation, granules coated with hydrophobic fractions extracted from red ginseng were shown to be bitterer and less soluble than those not coated spherical granules. In conclusion, fermented red ginseng extract spherical granules coated with hydrophobic extracts from red ginseng showed a preventative effect against moisture.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1286-1293
• /
• 1998

${SO_4}^{2-}$ ions present in industrial waste water if combined with other metal ions in the water can cause serious scale problem in a transporting pipe. In this study therefore ${SO_4}^{2-}$ ions in an acidic solution have been removed by using surface active glasses. Glasses with various compositions of $SiO_2-Na_2O-B_2O_3-RO$ (R=Mg, Ca, Sr, Ba) system were reacted in a ${SO_4}^{2-}$ ion-containing solution with various pHs ranging from 1 to 4 for various time the reacted glass surfaces were analyzed by XRD and SEM and all ions in the reacted solution were also measured ${SO_4}^{2-}$ ions in the solution were combined with divalent ions leached out of glass and precipitated on the glass surface as sulfate crystals. In this was the surface ion could be removed from the acidic solution. The sulfate ion removal capacity is closely related to the solubility product con-stants of the newly formed sulfate crystals. Almost no sulfate crystal was formed on the MgO-containing glass while sulfate crystals were easily formed on the glass containing either SrO or BaO This indicates that those glasses have strong removal efficiency of ${SO_4}^{2-}$ ions from the solution.

• Microbiology and Biotechnology Letters
• /
• v.48 no.1
• /
• pp.12-23
• /
• 2020

Edible films containing antimicrobial agents can be used as safe alternatives to preserve food products. Essential oils are well-recognized antimicrobials. However, their low water solubility, volatility and high sensitivity to oxygen and light limit their application in food preservation. These limitations could be overcome by embedding these essential oils in complexed product matrices exploiting the encapsulation efficiency of β-cyclodextrin. This study focused on the maximization of β-cyclodextrin production using cyclodextrin glucanotransferase (CGTase) and the evaluation of its encapsulation efficacy to fabricate edible antimicrobial films. Response surface methodology (RSM) was used to optimize CGTase production by Brevibacillus brevis AMI-2 isolated from mangrove sediments. This enzyme was partially purified using a starch adsorption method and entrapped in calcium alginate. Cyclodextrin produced by the immobilized enzyme was then confirmed using high performance thin layer chromatography, and its encapsulation efficiency was investigated. The clove oil/β-cyclodextrin inclusion complexes were prepared using the coprecipitation method, and incorporated into chitosan films, and subjected to antimicrobial testing. Results revealed that β-cyclodextrin was produced as a major product of the enzymatic reaction. In addition, the incorporation of clove oil/β-cyclodextrin inclusion complexes significantly increased the antimicrobial activity of chitosan films against Staphylococcus aureus, Staphylococcus epidermidis, Salmonella Typhimurium, Escherichia coli, and Candida albicans. In conclusion, B. brevis AMI-2 is a promising source for CGTase to synthesize β-cyclodextrin with considerable encapsulation efficiency. Further, the obtained results suggest that chitosan films containing clove oils encapsulated in β-cyclodextrin could serve as edible antimicrobial food-packaging materials to combat microbial contamination.

• Resources Recycling
• /
• v.7 no.1
• /
• pp.27-33
• /
• 1998

A study on thc recovcry oi nickel from waste pickling solutions removed li-ee nil~ica cid and hydmflnoric acid is carried out with pulsed column extractor for thc industrial application. The ~esults show that thc Iron and chromium arc efteclively elunmatcd from the waste solution by precipitalion as the form of hydraxidc with thc adjustment of pH with CaCO;, whlle the nickel is not prcc~pitatcd. Thc cxlraction eficicncy ol nickel with column cxtraclor generally improves 8s the pulse velosity (product of amplmde and frequency) incrcascs, optimum pcrfarmancc typically occuring slightly below an amplihldefrecluency product which results in flooding the column because of excessive emulsiIicalian And the nickel loaded in the organic is erfeclively conce~~trtratebdy ZM H2S0,, ~ I It he stlipping stage. The solubility of NiSO, in the H,SO, solution dccreaaes w~th thc higher H,SO, concentralion and appears to be 55 grL in the 2M HSO* solulian.

• Corrosion Science and Technology
• /
• v.12 no.6
• /
• pp.274-279
• /
• 2013

Flow accelerated corrosion (FAC) of the carbon steel piping in nuclear power plants (NPPs) has been major issue in nuclear industry. During the FAC, a protective oxide layer on carbon steel dissolves into flowing water leading to a thinning of the oxide layer and accelerating corrosion of base material. As a result, severe failures may occur in the piping and equipment of NPPs. Effect of alloying elements on FAC of pipe materials was studied with rotating cylinder FAC test facility at $150^{\circ}C$ and at flow velocity of 4m/s. The facility is equipped with on line monitoring of pH, conductivity, dissolved oxygen(DO) and temperature. Test solution was the demineralized water, and DO concentration was less than 1 ppb. Surface appearance of A 106 Gr. B which is used widely in secondary pipe in NPPs showed orange peel appearance, typical appearance of FAC. The materials with Cr content higher than 0.17wt.% showed pit. The pit is thought to early degradation mode of FAC. The corrosion product within the pit was enriched with Cr, Mo, Cu, Ni and S. But S was not detected in SA336 F22V with 2.25wt.% Cr. The enrichment of Cr and Mo seemed to be related with low, solubility of Cr and Mo compared to Fe. Measured FAC rate was compared with Ducreaux's relationship and showed slightly lower FAC rate than Ducreaux's relationship.