• Journal of Pharmaceutical Investigation
• /
• v.37 no.6
• /
• pp.339-347
• /
• 2007

SMEDDS is mixture of oils, surfactants, and cosurfactants, which are emulsified in aqueous media under conditions of gentle agitation and digestive motility that would be encountered in the gastro-intestinal(GI) tract. The main purpose of this work is to prepare self-microemulsifying drug delivery system(SMEDDS) for oral bioavailability enhancement of a poorly water soluble drug, atorvastatin calcium. Solubility of atorvastatin calcium was determined in various vehicles. Pseudo-ternary phase diagrams were constructed to identity the efficient self-emulsification region and particle size distributions of the resultant micro emulsions were determined using a laser diffraction sizer. Optimized formulations for in vitro dissolution and bioavailability assessment were $Capryol^{(R)}$ 90(50%), Tetraglycol(16%), and $Cremophor^{(R)}$ EL(32%). The release rate of atorvastatin from SMEDDS was significantly higher than the conventional tablet ($Lipitor^{(R)}$), 2-fold. Our studies illustrated the potential use of SMEDDS for the delivery of hydrophobic compounds, such as atorvastatin calcium by the oral route.

• Korean Journal of Pharmacognosy
• /
• v.46 no.2
• /
• pp.133-139
• /
• 2015

Two coumarinolignans, cleomiscosins C (1) and D (2) were isolated from the heartwood of Acer mono, together with four compounds, 5-O-methyl-(E)-resveratrol-3-O-${\beta}$-D-glucopyranoside (3), 5-O-methyl-(E)-resveratrol-3-O-${\beta}$-D-apiofuranosyl-(1$\rightarrow$6)-${\beta}$-D-glucopyranoside (4), scopoletin (5), and (E)-resveratrol-3-O-${\beta}$-D-glucopyranoside (6). Of them, cleomiscosins C (1) and D (2) were applied to preparing inclusion complex molecules with ${\beta}$-cyclodextrin (${\beta}$-CD) to improve the very poor solubility in cell media. The CD complexes of 1 and 2 exhibited an enhancement of water solubility which is feasible to measure their cytotoxicity using a spectrophotometer in a cell-based assay. Anti-proliferative activity of these complex molecules was successfully estimated on HCT116 human colon cancer cells, and cleomiscosin D (2) showed anti-proliferative effects at the concentration of 1.95~31.2 ${{\mu}g}$/mL in a dose-dependent manner.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.3
• /
• pp.146-151
• /
• 2004

Cyclodextrin compounds including 2-hydroxypropyl-β-cyclodextrin(β-HPCD) though to be accelerate the biodegradation of PAHs molecule by increasing solubility of PAHs through detaining PAHs in their's cavity. However, only this mechanism is not sufficient to explain the enhancement of PAHs biodegradation by β-HPCD. To find out possible additional role of β-HPCD in the enhancement of PAHs biodegradation, biodegradation rates of pyrene and benzo[a]pyrene (B[a]P) by a PAHs degrading Novosphingobium pentaromtivorans US6-1 strain were compared between with and without addition of β-HPCD. Changes of bacterial biomass were also measured simultaneously. In addition catechol 1,2-dioxygenase activity was determined depending on pre-incubation conditions. As a result, β-HPCD accelerate the degradation rate of pyrene by strain US6-1 and especially the β-HPCD amendment was obligatory for the degradation of B[a]p. Bacterial biomass was responsible for β-HPCD, however, PAHs compounds such as pyrene and B[a]P did not contribute to the bacterial biomass. Catechol 1,2-dioxygenase specific activity of US6-l cells pre-cultured in MM2 medium containing l％ β-HPCD was higher than that of cells pre-cultured in ZoBell medium. The former case also showed similar activity compared to that of cells serially starved in MM2 medium after grown in ZoBell medium. These results imply that the presence of β-HPCD accelerate the degradation of PAHs by increasing the bacterial biomass as well as by increasing the water solubility of PAHs.

• YAKHAK HOEJI
• /
• v.56 no.3
• /
• pp.164-172
• /
• 2012

This study was aimed to increase the solubility, dissolution and permeation rates of atorvastatin calcium (ATC) using bile salt and/or 2-hydroxypropyl-${\beta}$-cyclodextrin ($HP{\beta}CD$). From solubility studies, sodium deoxycholate (SDC) among bile salts studied was found to have the highest solubilizing effect on ATC ($4.4{\pm}0.4$ mg/ml), and the order of increasing solubility was SDC>sod. cholate>sod. glycocholate>sod. taurodeoxycholate>sod. taurocholate>conjugated bile acid. ATC solid dispersions were prepared at various ratios of drug to SDC and/or $HP{\beta}CD$, and evaluated by differential scanning calorimetry (DSC), dissolution studies and dissolution-permeation studies. DSC curves showed amorphous state of ATC in the physical mixture and solid dispersion. Dissolution rates of ATC-SDC solid dispersions and physical mixture were markedly increased at pH 6.8, but decreased at pH 1.2 with greater proportions of SDC due to the precipitation of SDC, compared with that of drug alone. On the other hand, dissolution rates of ATC-$HP{\beta}CD$ solid dispersion and physical mixture at pH 1.2 were varied with the ratio of drug to carriers. From duodenal permeation studies, it was found that fluxes of ATC (donor dose: 0.5 mg/3.5 ml) in the presence of 25 mM sodium glycocholate, SDC, sod. cholate and sod. taurocholate $(5.7{\pm}0.9$, $5.6{\pm}0.9$, $4.8{\pm}0.7$ and $4.6{\pm}0.9\;{\mu}g/cm^2/hr$, respectively) were enhanced, compared with drug alone ($3.4{\pm}0.9\;{\mu}g/cm^2/hr$). In the dissolution-permeation studies, 1 : 9 : 10 (w/w) ATC-SDC-$HP{\beta}CD$ solid dispersion increased the flux 2.2 times, compared with 1 : 5 : 4 (w/w) ATC-lactose-corn starch mixture as control. In conclusion, solid dispersions with bile salt and $HP{\beta}CD$ were found to be an effective means for increasing the dissolution and permeation rates of ATC.

• YAKHAK HOEJI
• /
• v.60 no.1
• /
• pp.36-45
• /
• 2016

This study was aimed to enhance the percutaneous absorption of tizanidine hydrochloride (TZ) across Strat-M$^{TM}$ artificial membrane and excised hairless mouse skin using various vehicles and chemical permeation enhancers. Solubility studies were performed using hydrophilic and lipophilic vehicles. To initially evaluate vehicle effects on skin permeation, Strat-M$^{TM}$ membrane was adopted using Franz-type diffusion cells loaded with 0.4 mg donor dose. Effects of fatty acids on the permeation of TZ from PG and PGMC were compared, and the effects of various hydrophilic vehicles in the presence of linoleic acid were studied using excised hairless mouse skin specimens. The mean solubility (mg/ml) of TZ in hydrophilic vehicles was higher: water > PG > DMSO > ethanol > PEG 200 > NMP > PEG 300 > PEG 400 > DGME, and solubilities in lipophilic vehicles such as PGMC, PGMC, IPM, Captex 200 and Captex 300 were much less than 1.0 mg/ml. Permeation rates through StratTM membrane from pure vehicles were in the rank order: PGMC ${\geq}$ LBF > DMSO ${\geq}$ NMP ${\geq}$ PGML ${\geq}$ PG ${\geq}$ PEG 200 ${\geq}$ DGME ${\geq}$ EtOH. However, permeation rates of TZ through hairless mouse skin from pure vehicles were very low, although PG showed the highest flux ($1.66{\pm}0.28{\mu}g/cm^2{\cdot}hr$). Therefore, PG was selected in further studies. Addition of enhancers (3 v/v%) into PG markedly increased the flux (${\mu}g/cm^2{\cdot}hr$): oleyl alcohol ($14.9{\pm}3.1$) ${\geq}$ oleic acid ($14.5{\pm}1.6$) ${\geq}$ linoleic acid ($13.7{\pm}1.3$) > capric acid ($4.4{\pm}0.6$) > caprylic acid ($2.1{\pm}0.4$). Among hydrophilic vehicles with linoleic acid, PG and DMSO revealed relatively higher permeation for TZ. Increase of donor dose in PG resulted in dose-dependent permeation fluxes. These results suggest that permeation properties of TZ from nonaqueous solutions are markedly different between Strat-$M^{TM}$ membrane and excised hairless mouse skin, and transdermal delivery of TZ would be feasible with a combination of PG and enhancers.

• Membrane Journal
• /
• v.11 no.3
• /
• pp.116-123
• /
• 2001

Polyimide-silica hybrid membranes were prepared and the effect of silica content on the structural properties and the gas transport properties was studied. The hybrid membranes were obtained by the sol-gel process starting from 1,2,4,5-benzenetetracarboxylic dianhydride(PMDA), 4,4`-diamino- diphenyl oxide(ODA) and tetraethoxysilane(TEOS) in N,N` dimethylacetatmide (DMAc) solvent. The structural characterizations of the membrane were performed by FT-IR, EDX, TGA and SEM. The gas permeation experiments with ${N_2}, {O_2}, {H_2}, {CO_2}and ${CH_4}$ were carried out at the temperature of $25^{\circ}C$ and in the range of pressure from 3atm to 7atm. the hybrid membranes showed higher thermal stability than PI membranes. The silica patricles were uniformly embedded in the polyimide matrix and the size of silica particles increased with increasing silica content. The permeability coefficients of ${N_2}, {O_2}, {H_2}, {CO_2}and ${CH_4}$ increased with increasing silica content but the diffusion coefficients might appear to be a result of a solubility enhancement. In spite of the permeability enhancement, an increase in the selectivities of ${H_2}/{N_2}, ${H_2}/{O_2} and ${H_2}/{CO_2} was observed.

• Archives of Pharmacal Research
• /
• v.24 no.6
• /
• pp.572-577
• /
• 2001

The feasibility of skin penetration was studied for aspalatone (AM, acetylsalicylic acid maltol ester), a novel antithrombotic agent. In this studys hairless mouse dorsal skins were used as a model to select composition of vehicle and AM. Based on measurements of solubility and partition coefficient, the concentration of PC that showed the highest flux for AM across the hairless mouse skin was found to be 40%. The cumulative amount permeated at 48 h, however, appear inadequate, even when the PC concentration was employed. To identify a suitable absorption enhancer and its optimal concentration for AM, a number of absorption enhancers and a variety of concentration were screened for the increase in transdermal flux of AM. Amongst these, linoleic acid (LOA) at the concentration of 5% was found to have the largest enhancement factor (i.e., 132). However, a further increase in AM flux was not found in the fatty acid concentration greater than 5%, indicating the enhancement effect is in a bell-shaped currie. In a study of the effect of AM concentration on the permeation, there was no difference in the permeation rate between 0.5 and 1% for AM, below its saturated concentration. At the donor concentration of 2%, over the saturated condition, the flux of AM was markedly increased. A considerable degradation of AM was found during permeation studies, and the extent was correlated with protein concentrations in the epidermal and serosal extracts, and skin homogenates. In rat dorsal skins, the protein concentration decreased in the rank order of skin homogenate > serosal extract > epidermal extract. Estimated first order degradation rate constants were $6.15{\pm}0.14,{\;}0.57{\pm}0.02{\;}and{\;}0.011{\pm}{\;}0.004{\;}h^{-1}$ for skin homogenate, serosal extract and epidermal extract, respectively. Therefore, it appeared that AM was hydrolyzed to some extent into salicylmaltol by esterases in the dermal and subcutaneous tissues of skin. taken together, our data indicated that transdermal delivery of AM is feasible when the combination of PC and LOA is used as a vehicle. However, since AM is not metabolically stable, acceptable degradation inhibitors may be nervessary to fully realize the transdermal delivery of the drug.

• Food Science of Animal Resources
• /
• v.43 no.2
• /
• pp.245-268
• /
• 2023

The effects of phosphate alternatives on meat quality in marinated chicken were investigated with the application of chilling and freezing. Breast muscles were injected with solution of the green weight containing 1.5% NaCl and 2% sodium tripolyphosphate (STPP) or phosphate alternatives. Treatment variables consisted of no phosphate [control (-)], 0.3% sodium tripolyphosphate [control (+)], 0.3% prune juice (PJ), 0.3% oyster shell, 0.3% nano-oyster shell, and 0.3% yeast and lemon extract (YLE) powder. One-third of the meat samples were stored at 4℃ for 1 d, and the rest of the meats were kept at -18℃ for 7 d. In chilled meat, a lower drip loss was noted for control (+) and YLE, whereas higher cooking yield in YLE compared to all tested groups. Compared with control (+), the other treatments except PJ showed higher pH, water holding capacity, moisture content, lower thawing and cooking loss, and shear force. Natural phosphate alternatives except for PJ, improved the CIE L^* compared to control (-), and upregulated total protein solubility. However, phosphate alternatives showed similar or higher oxidative stability and impedance measurement compared to control (+), and an extensive effect on myofibrillar fragmentation index. A limited effect was observed for C^*, h°, and free amino acids in treated meat. Eventually, the texture profile attributes in cooked of phosphate alternatives improved except for PJ. The results indicate the high potential use of natural additives could be promising and effective methods for replacing synthetic phosphate in chilled and frozen chicken with quality enhancement.

• Journal of Institute of Convergence Technology
• /
• v.3 no.1
• /
• pp.15-18
• /
• 2013

The next generation alternative fuel of diesel, DME (Dimethyl Ether) discharges particulate matter hardly due to chemical structural as oxygen-fuel so it has the eco-friendly property. Despite these advantages, the DME has the technical difficulties to apply to the diesel engine because of a low calorific value, viscosity and compressibility effects. From this point of view, we performed experimental studies on improved reliability of DME common-rail vehicle and lubricity enhancement of DME fuel for empirical distribution of eco-friendly DME fuel. Also we analyzed solubility of lubrication enhancer according to a drop in temperature, try to secure reliability about core parts of DME vehicle by applying lubrication enhancer in the DME common-rail vehicle.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.4
• /
• pp.341-349
• /
• 2002

Heat and mass transfer characteristics of a surfactant-added LiBr-$H_2O$ solution flowing over a single horizontal tube were examined experimentally. The parameters considered were surfactant (2-ethyl-1-hexanol) concentration, solution temperature at the top of the tube and absorber pressure. Even with an amount of the surfactant below the solubility limit, heat and mass transfer performances were enhanced tremendously. The Nusselt and Sherwood numbers increased by about 70% and 340%, respectively, when 10 ppm of the surfactant was added. However, an excess amount of the surfactant in the solution did not bring a further enhancement. The absorption performance deteriorated when the non-condensable gases were extracted from the system (by a vacuum pump) since the vaporized surfactant was also extracted during the process. Therefore, it is desirable to add a sufficient amount of the surfactant (more than 10 ppm) to maintain high performance of absorption.