• The Korean Journal of Mycology
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1975

Since the importance of casing in fruit body formation of Agaricus bisporus has been emphasized, physico-chemical characteristics of casing materials were discussed by many workers and a mixture of peat and mineral soil as proper casing material has been adopted in many of mushroom growing countries. Because of limited resources of peat in Korea, it is necessary to find practical performance and substitutional materials for casing. The effect of casing on mycelial growth and mushroom yield of A. bisporus varied with materials, its combination and practices etc. The experiments to be discussed in this paper are concerned with pH and Ca of casing material which influence A bisporus, and changes of physico-chemical characteristics with mixing ratio of casing materials and its effect on A. bisporus. The optimum range of moisture content of each material, management of watering and application of physico-chemical characteristics casing materials was also investigated and re-use of weathered spent compost for casing material was described. 1. The effect of calcium on mycelial growth of A. bisporus at various pH in Halbschalentest showed different results with calcium sources. Best results were obtained around neutrality and fresh weight of fruit bodies grown in the range of pH 7 to 8 was highest among the tested levels. 2. Available moisture, pore space, organic matter, cation exchangeable capacity and exchangeable cation was increased by an increase of mixing ratio of peat in casing materials, while an adverse effect was obtained by addition of sand. 3. Mycelial growth on clay loam was more rapid at a lower bulk density of 0.75g/cc and at 20% moisture content on a dry weight basis at the same bulk density. 4. Mixing ratio of casing materials, 60 to 80 per cent by volume of peat mixed with 20 to 40 per cent of clay loam produced the highest yield of fresh fruit bodies and sand the lowest. However, per cent of open cap was highest in peat and lowest in sand. 5. Days required for fruit body initiation was shortened in mixtures of peat and clay loam by one to three days compared with other materials and the formation of flushes was clear. 6. The effect of some physico-chemical characteristics of casing materials on the fresh weight of fruit bodies were estimated by a multiple regression equation; Y=-923.86+$8.18X_1+8.04X_2+7.90X_3+0.12X_4+2.03X_5-0.82X_6-0.54X_7$ where $X_1,X_2,X_3,X_4,X_5,X_6,X_7$ are sand, silt, clay, available moistuer, porosity, organic matter and exchangeable cation respectively. The productivity of certain casing material could be predicted from this equation. 7. Fresh weight of fruit bodies was positively correlated with porosity exchangeable cation, organic matter, available moisture, silt and clay of materials; while sand was negatively correlated. On the contrary, sand was the unique factor reducing per cent of open cap. 8. Distribution of three phases of high productive casing material was concentrated in the range of 10 to 30 per cent solids, 15 to 30 per cent liquids, and 50 to 60 per cent in air volume. 9. Fresh weight of fruit bodies from peat was not affected with heavy watering but in clay loam and sandy loam severe crop losses occurred. Fresh weight of individual fruit was increased and open caps were decreased with heavy watering but light watering resulted in adverse effects: its effect was especially great in peat. 10. Optimum range of moisture content by weight on a dry basis was different with each casing material. To maintain optimum moisture content concerned with yield of fruit bodies and open cap, sandy loam and peat mixtures required daily watering of 0.6, 0.6 to 1. 2 and 1.2 to 2.4 liters per $3.3m^2$ of bed area, respectively. 11. Maximum yield of fruit body was recorded in the range of pF 2. 0 to 2. 5 of casing materials if organic matter content was below 4.2 per cent and in pF 1. 3 to 1.8 if above 7.1%. 12. pF curve of a certain casing material could be draws from moisture content at various pF values by multiple regression equations provided texture, organic matter and calcium of the casing material are given. Optimum moisture range of the casing materials also could be estimated by the equation. 13. It was possible to improve the phyico-chemical characteristics of clay loam and sandy loam by addition of weathered spent compost although the effect was less than in the case of peat. Fresh weight of fruit bodies wsa increased by addition of weathered spent compost but its effect was not as remarkable as peat. Accordingly, further studies will be required.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.4
• /
• pp.319-327
• /
• 2000

This study was conducted to prolong the edible period of Kimchi by adding chitosan (0.25, 0.5%) and sodium salts of various organic acids(0.01~0.04M citrate, malate, lactate) . The edible period was estimated by measuring changes in pH. titratable acidity(TA), PH/TA ratio, ascorbic acid content and pectin fraction during Kimchi fermentation at 2$0^{\circ}C$. The results were compared by estimating the maturity of Kimchi fermentation. Kimchi with the chitosan showed higher pH and titratable acidity throughout the fermentation period than that without chitosan. The pH decreased during the fermentation in the order of control, 0.25% chitosan, 0.5% chitosan, 0.5% chitosan+Na-citrate, 0.5% chitosan+Na-malate and 0.5% chitosan+Na-lactate. But the titratable acidity increased in the order of control, 0.5% chitosan+Na-malate, 0.25% chitosan. 0.5% chitosan+Na-citrate, 0.5% chitosan and 0.5% chitosan+Na-lactate. The PH/TA ratio decreased in the order of control, 0.25% chitosan, 0.5% chitosan+Na-malate, 0.5% chitosan, 0.5% chitosan+Na-citrate and 0.5% chitosan+Na-lactate. Ascorbic acid content in Kimchi was the highest at the 3rd day and then decreased during fermentation. Ascorbic acid content in Kimchi containing 0.5% chitosan and organic acid salts was higher than others. Alcohol insoluble solids( AIS ) in Kimchi decreased during fermentation in the order of control, 0.25% chitosan, 0.5% chitosan, 0.5% chitosan+Na-palate. 7.5% chitosan+Na-lactate and 0.5% chitosan+Na-citrate. During fermentation, hot water soluble pectin (HWSP) of control increased, whereas HCI soluble pectin (HCISP) decreased. By addition of chitosan, however, the results became reverse. Chitosan addition appeared to be effective in improving preservation quality of Kimchi during fermention. The edible period become extended by using chitosan plus organic acids instead of using chitosan only. Overall. addition of 0.5% chitosan+Na-lactate seemed most effective in prolonging the edible periods during Kimchi fermentation.

• Korean journal of food and cookery science
• /
• v.24 no.1
• /
• pp.84-91
• /
• 2008

In this study, Kimchi, soup and stew samples were collected from May to June, 2007, in the Jeonju area, and their salinity levels were analyzed. In addition, housewives were surveyed via questionnaire to assess food behaviors and consumption patterns. The average salinity of the Kimchi samples was $2.0{\pm}0.5%$. The average salinity of the soup/stew samples was $1.0{\pm}0.3%$ in the broth portion and $0.8{\pm}0.3%$ in the homogenized mixture of both broth and solids. The average salinity of all types of soup was $0.9{\pm}0.3%$, and that for stews was $1.1{\pm}0.3%;$ the average salinity of the stew was significantly higher than that of the soup (p<0.001). Beanpaste soup had a significantly higher average salinity $(1.0{\pm}0.3%)$ than clear soup $(0.8{\pm}0.3%)$ (p<0.05). The Food behavior scores of the respondents, with regard to sodium intake and salty taste preference, showed significant positive correlations to the salinity of the soup and stew samples (p<0.01). The consumption patterns of the Kimchi and soup/stews were also analyzed to determine whether there was a relationship to the saltiness of the food samples. The respondents were divided into two groups for each food category: Kimchi groups of below 2.0% salinity and above 2.1% salinity, soup/stew groups of below 0.8% salinity and above 0.9% salinity. The below 0.8% salinity soup/stew group used salt or soy sauce in meals significantly less frequently (p<0.01) than the above 0.9% salinity group. The lower salinity Kimchi and soup/stew groups gave significantly higher scores regarding answers that their Kimchi was 'bland' (p<0.05). The types of frequently consumed Kimchi were determined as Korean cabbage, Welsh, wild greens, radish, KKak Du Ki, and Yol Mu Kimchi. When compared to the above 2.1% salinity Kimchi group, the below 2.0% salinity Kimchi group gave higher scores regarding answers that they consumed 'more than half the broth in the bowel' and also gave significantly higher (p<0.01) scores in answering that they consumed only the solid ingredients, leaving the broth.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.428-432
• /
• 1996

The chemical components of Korean loquat (Eriobotrya japonica Lindl.) fruit were analysed. Approximate compositions of loquat flesh and seed were as follows. respectively crude lipid 0.53% and 0.83%, crude protein 0.05% and 5.27%, crude fiber 3.46% and 3.49%, crude ash 3.24% and 2.78%, carbohydrate 92.72% and 87.63% Soluble solids content, pH and acidity (citric acid) of loquat flesh juice were $12^{\circ}Bx$ by saccharometer, 4.43 and 0.18%, respectively. Free sugar compositions of loquat flesh and seed extracts $(3^{\circ}Bx)$ were as follows, respectively; fructose 0.77% and 0.31%, glucose 0.73% and 0.79%, sucrose 0.52% and 0.19%, ribose and 0.56%, Loquat flesh contained Glu 336.72 mg%, Asp 251.06 mg%, Arg 30.90 mg% and Lys 5.26 mg% Loquat seed contained Glu 448.23 mg%, Asp 335.63 mg%, lle 44.20 mg% and His 37.89 mg%, Potassium (k) contents of loquat flesh and seed were 32627.95 mg% and 28936.28 mg% in total amount of crude ash, while vitamin A and C of loquat flesh and seed were not detected. Composition of major lipid of loquat fruit seed oils fractionated by silicic acid was neutral lipids 43.78%, glycolipids 12.32% and phospholipids 43.90%, Fatty acid compositions of loquat seed lipid extracted by chloroform-methanol (2 : 1) were as follow; palmitic acid 23.72%, stearic acid 3.815, oleic acid 8.55%, linoleic acid 54.29% and linolenic acid 9.63%, Neutral lipids consist of palmitic acid 28.89, stearic acid 6.80%, oleic acid 11.07%, linoleic acid 40.67% and linolenic acid 12.58%, Glycolopids cinsist of palmitic acid 13.21%, stearic acid 4.56%, oleic acid 6.53%, linoleic acid 64.92% and linolenic aicd 10.77% Phospholipids consist of palmitic acid 30.95%, stearic acid 3.40%, oleic acid 9.09%, linoleic acid 48.45% and linolenic acid 8.10%.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.746-752
• /
• 2005

In this study, the effect of reaction parameters including reaction temperature, time, and pressure on sludge degradation and conversion to intermediates such as organic acids were investigated at low critical wet air oxidation(LC-WAO) conditions. Degradation pathways and a modified kinetic model in LC-WAO were proposed and the kinetics model predictions were compared with experimental data under various conditions. Results in the batch experiments showed that reaction temperature directly affected the thermal hydrolysis reaction rather than oxidation reaction. The efficiencies of sludge degradation and organic acid formation increased with the increase of the reaction temperature and time. The removal of SS at $180^{\circ}C$, $200^{\circ}C$, $220^{\circ}C$ and $240^{\circ}C$ of reaction temperatures and 10 min of reaction time were 52.6%, 68.3%, 72.6%, and 74.4%, respectively, indicating that most organic suspended solids were liquified at early stage of reaction. At $180^{\circ}C$, $200^{\circ}C$, $220^{\circ}C$ and $240^{\circ}C$ of reaction temperatures and 40 min of reaction time, the amounts of organic acids formed from 1 g of sludge were 93.5 mg/g SS, 116.4 mg/g SS, 113.6 mg/g SS, and 123.8 mg/g SS, respectively, and the amounts of acetic acid from 1 g of sludge were 24.5 mg/g SS, 65.5 mg/g SS, 88.1 mg/g SS, and 121.5 mg/g SS, respectively. This suggested that the formation of sludge to organic acids as well as the conversion of organic acids to acetic acid increased with reaction temperature. Based on the experimental results, a modified kinetic model was suggested for the liquefaction reaction of sludge and the formation of organic acids. The kinetic model predicted an increase in kinetic parameters $k_1$ (liquefaction of organic compounds), $k_2$ (formation of organic acids to intermediate), $k_3$ (final degradation of intermediate), and $k_4$ (final degradation of organic acids) with reaction temperature. This indicated that the liquefaction of organic solid materials and the formation of organic acids increase according to reaction temperature. The calculated activation energy for reaction kinetic constants were 20.7 kJ/mol, 12.3 kJ/mol, 28.4 kJ/mol, and 54.4 kJ/mol, respectively, leading to a conclusion that not thermal hydrolysis but oxidation reaction is the rate-limiting step.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.2
• /
• pp.90-100
• /
• 2012

This study centering on 10 village - Bangjuks analyzed multifunctionality value of village Bangjuks which have been main water treatment system in Korean traditional villages. On the basis of understanding the structure and character of components such as the well, common spring, village waterway and others which making water-flow and consisting of aquatic system in Korean traditional village Bangjuk, the conclusion as the instrumental device of social and ecological role and ecological watershed management, securing the ecosystem soundness of the damaged or deteriated aquatic ecosystem due to the industrialization and urbanization is as below; 1. The traditional village Bangjuk was environmentally friendly hydraulic system which gathers waterways of village into a point including sewage water, retains and flows out to village through agricultural waterway. Through this Bangjuk, they have managed sewage and rainfall runoff flowed out village efficiently. It is not only a detention system of water but a kind of eco-friendly system that flow out water into the rivers after reusing and filtering it. 2. Around five traditional villages and five villages after modernization, this study classified the types of village Bangjuk as three types considering geographic location, size, etc; marsh type of low swamp, high water -low rice field type of natural flow stucture, low water - high rice field type requiring artificial irrigation facility. All the five traditional villages were turned out to be marsh type of low swamp. Geoji, Sanjeri, Ma-am, Yangchon of the agricultural villages were high water-low rice filed type, and Sangchoenri village was classified low water-high rice field type. 3. This study checked up the function of water purification of village Bangjuk. In Wonteo and Geji villages affected by discharge of village sewer and domestic sewage, the efficiency of ammonia nitrogen($NH_3-N$) and total phosphorus(T-P) was 56~95%, which was high. In Sangcheonri and Sanjeri villages strongly affected by stall and farmland, the efficiency of suspended solids(SS) was 70~85%, and that of total nitrogen(T-N) and total phosphorus(T-P) was 5.3~65%. 4. A water purification system can be found out in the system of village Bangjuk that filter out village sewage and rainfall runoff flowed through the settle and filter of pollution source and denitrification of plants. Through this system of village Bangjuk, it must be used as the basic facilities for the ecological watershed management. The sewage management system of village Bangjuk as a eco-filter must be used and studied as an eco-friendly facility for the ecological watershed management around the subwatershed and catchment.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.239-245
• /
• 2001

The CA(Controlled Atmosphere) storage of cherry tomatoes were carried out under seven gas compositions including air. The weight loss of cherry tomatoes progressively increased with storage time. In the case of cherry tomatoes stored under CA conditions, increment of weight loss was reduced. However, cherry tomatoes (in air) tut about 15% weight at the end of storage. In CA stored cherry tomatoes lost about 10% weight at the same time. General trend was a decrease in titratable acidity with storage time. In air md 6.4% O$_2$, 4.2% CO$_2$, titratable acidity was lower than that in other storage conditions. During storage of cherry tomatoes, soluble solids increased till 8 days of storage, and then decreased. Stored cherry tomatoes in air and 6.4% O$_2$+4.2% CO$_2$ have lower values. Lycopene contents of cherry tomatoes with 6% O$_2$ storage condition increased and cherry tomatoes with 1% O$_2$+6% CO$_2$ and 3% O$_2$+3.1% CO$_2$maintained s initial contents. In air, flesh firmness decrease till 8 days, and then increase. At 1% O$_2$+6% CO$_2$ ethanol contents were ten times to that of other experimental conditions. Air and 6% O$_2$+7.8% CO$_2$ condition had lowest value for the ethanol content. In changes of organic acid and citric acid decreased slowly during storage, malic acid in air and below 3% O$_2$was disappeared at 8 days. Above 4% O$_2$concentration malic acid contents were maintained till 16 days. In over all acceptability, air and 6.4% O$_2$+7.8% CO$_2$ condition took a good score from the panel. Quality of stored cherry tomatoes was not edible condition in 1% O$_2$+6% CO$_2$. CA storage cherry tomatoes took a good score in firmness and juiciness where as control received good score in color and sweetness. This result was explained that in air ad 6.4% O$_2$+7.8% CO$_2$stored cherry tomato was ripened and full color development, but in CA was break stage because of suppressed ripening.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.5
• /
• pp.600-607
• /
• 2017

The total acidity (TA) of Makgeolli was affected by suspended solids and $CO_2$ produced during the fermentation process. Nine Makgeollis (four sterilized and five unsterilized Makgeollis) were collected in the market, and their TAs were compared before and after filtration and $CO_2$ removal. TAs of sterilized Makgeollis were 0.379~0.477%, which significantly decreased to 0.167~0.225% after filtration and 0.132~0.170% after $CO_2$ removal (P<0.05). TAs of unsterilized Makgeollis were 0.412~0.467% and decreased to 0.157~0.365% after filtration and 0.143~0.280% after $CO_2$ removal (P<0.05). TAs of Makgeollis were compared by three methods using different indicators. The TAs of sterilized and unsterilized Makgeollis were 0.105~0.123% and 0.105~0.200%, respectively, by bromthymol blue+neutral red (light green), 0.129~0.154% and 0.130~0.255%, respectively, by phenolphthalein (faint pink), and 0.120~0.146% and 0.130~0.232%, respectively, by bromthymol (blue). Nowadays, Makgeolli is commercialized with various distinct colors, and thus it is important to select appropriate indicators for proper titration endpoint identification for TA measurement. The compositions of organic acids profiles varied depending on sterilized or unsterilized Makgeollis, in which oxalic acid (0.108~0.329 mg/mL), malic acid (ND to 0.134 mg/mL), lactic acid (0.127~0.776 mg/mL), and citric acid (ND to 1.159 mg/mL) were found, and lactic acid was in unsterilized more than sterilized Makgeollis.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.1-8
• /
• 2020

Centrifugal pump is a facility that transfers energy to fluid through centrifugal force, which is usually generated by rotating the impeller at high speed, and is a major process facility used in many LNG production bases such as vaporization seawater pump, industrial water and fire extinguishing pump using seawater. to be. Currently, pumps in LNG plant sites are subject to operating conditions that vary depending on the amount of supply desired by the customer for a long period of time. Pumps in particular occupy a large part of the consumption strategy at the plant site, and if the optimum operation condition is not available, it can incur enormous energy loss in long term plant operation. In order to solve this problem, it is necessary to identify the performance deterioration factor through the flow analysis and the result analysis according to the fluctuations of the pump's operating conditions and to determine the optimal operation efficiency. In order to evaluate operation efficiency through experimental techniques, considerable time and cost are incurred, such as on-site operating conditions and manufacturing of experimental equipment. If the performance of the pump is not suitable for the site, and the performance of the pump needs to be reduced, a method of changing the rotation speed or using a special liquid containing high viscosity or solids is used. Especially, in order to prevent disruptions in the operation of LNG production bases, a technology is required to satisfy the required performance conditions by processing the existing impeller of the pump within a short time. Therefore, in this study, the rotation difference of the pump was applied to the ANSYS CFX program by applying the modified 3D modeling shape. In addition, the results obtained from the flow analysis and the curve fitting toolbox of the MATLAB program were analyzed numerically to verify the outer diameter correction theory.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.312-318
• /
• 2018

We investigated the effect of postharvest treatments of calcium chloride, lysophosphatidyl ethanolamine (LPE) or 1-methylcyclopropene (1-MCP) on fruit quality during simulated marketing in Asian pear (Pyrus pyrifolia Nakai). 'Whangkeumbae' pear fruits were immersed in 0.25, 0.5 or 1.0% $CaCl_2$ solution with or without ultrasound (40kHz) at $25^{\circ}C$ for 3min followed by storage at $1^{\circ}C$ for 30 days simulated as abroad exportation. After simulated marketing at $25^{\circ}C$ and 80% relative humidity (RH) up for 10 days, quality parameters were evaluated. Results indicated that the ultrasound and $CaCl_2$ treatment had a synergic effect on keeping the green skin color which showed lower $a^*$ value. The combination treatment of ultrasound and 0.5% and 1.0% $CaCl_2$ significantly reduced internal browning disorders, although severe skin blemish disorder (20-23%) occurred in 1.0% $CaCl_2$ treatment. 'Wonhwang' pears were immersed in 1,000ppm LPE for 3 minutes or were fumigated in 1,000 ppb 1-MCP for 12 hours, respectively. The results of the fruit quality survey during the 21 days of distribution period are as follows. The 1-MCP treatment was maintained at a constant flesh firmness of 33N or higher during the distribution period. The LPE treated fruits had a lower physiological disorder index than the untreated group, but showed a relatively higher value than the 1-MCP treated group. In the case of 1-MCP treatment, the fruit respiration rate was significantly lower than of untreated control ($6.0mL{\cdot}kg^{-1}{\cdot}hr^{-1}$) during the simulaed marketing period. Consequently, it was expected that the postharvest treatments of 0.5% calcium chloride in pararell with ultrasound and 1-MCP fumigation can help to maintain Asian pear quality during distribution period.