• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.50-56
• /
• 2010

$La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta}$ (LSCF) powders with different particle sizes, synthesized through a citrate complexation method and a gel-casting technique, are used to fabricate porous LSCF cathodes with graded microstructures via tape casting. To create porous electrodes with desired porosity and pore structures, graphite and starch are used as pore former for different layers of the graded cathode. Examination of the microstructures of the as-prepared LSCF cathode using an SEM revealed that both grain size and porosity changed gradually from the catalytically active layer (near the electrodeelectrolyte interface) to the current collection layer (near the electrode-interconnect interface). Impedance analysis showed that a 3-layer LSCF cathode with graded microstructures exhibited much-improved performance compared to that of a single-layer LSCF cathode, corresponding to interfacial resistance of 0.053, 0.11, and 0.27 $\Omega{\cdot}cm^2$ at 800, 750, and $700^{\circ}C$ respectively.

• 접착 및 계면
• /
• 제15권2호
• /
• pp.57-62
• /
• 2014

피타고라스 원리를 이용하면 특정 도형이 보유하고 있는 각도에 대한 계산이 용이해진다. 정적 접촉각 평가방법을 이용할 경우 용액과 고체 물체간의 접촉각의 수치 계산이 가장 중요한 부분이다. 용액과 고체 표면이 이루는 각도 측정을 용이하게 하기 위해서 접촉각을 계산하는 방법을 규격화하는 방법과 접촉각 평가에 따른 실험적 변수 최소화 조건을 마련하였다. 접촉각 실험을 위한 용액의 직경에 따른 접촉각의 각도 계산 오차를 분석하고, 최적의 물방울 직경은 1 mm임을 확인하였다. 피타고라스 원리를 이용한 접촉각 측정방법은 전진각과 후진각을 확인하는데 사용할 수 있으며, 소수성 및 친수성 표면을 분석하는데 적용이 가능하였다. 궁극적으로 일반적인 접선 긋기를 통한 각도 계산 결과보다 피타고라스 원리를 이용하여 접촉각 각도 계산을 실시할 경우 비교적 정확한 접촉각 계산 결과를 확인할 수 있었다.

• ETRI Journal
• /
• 제24권5호
• /
• pp.349-359
• /
• 2002

With Ni/Au and Pd/Au metal schemes and low temperature processing, we formed low resistance stable Ohmic contacts to p-type GaN. Our investigation was preceded by conventional cleaning, followed by treatment in boiling $HNO_3$:HCl (1:3). Metallization was by thermally evaporating 30 nm Ni/15 nm Au or 25 nm Pd/15 nm Au. After heat treatment in $O_2$ + $N_2$ at various temperatures, the contacts were subsequently cooled in liquid nitrogen. Cryogenic cooling following heat treatment at $600^{\circ}C$ decreased the specific contact resistance from $9.84{\times}10^{-4}$ ${\Omega}cm^2$ to $2.65{\times}10^{-4}$ ${\Omega}cm^2$ for the Ni/Au contacts, while this increased it from $1.80{\times}10^{-4}$ ${\Omega}cm^2$ to $3.34{\times}10^{-4}$ ${\Omega}cm^2$ for the Pd/Au contacts. The Ni/Au contacts showed slightly higher specific contact resistance than the Pd/Au contacts, although they were more stable than the Pd contacts. X-ray photoelectron spectroscopy depth profiling showed the Ni contacts to be NiO followed by Au at the interface for the Ni/Au contacts, whereas the Pd/Au contacts exhibited a Pd:Au solid solution. The contacts quenched in liquid nitrogen following sintering were much more uniform under atomic force microscopy examination and gave a 3 times lower contact resistance with the Ni/Au design. Current-voltage-temperature analysis revealed that conduction was predominantly by thermionic field emission.

• 한국주조공학회지
• /
• 제23권5호
• /
• pp.276-285
• /
• 2003

In the undercooled melt of $Pd_{40}Cu_{30}Ni_{10}P_{20}$ alloy, the solidification behavior including nucleation and growth of crystals at the micrometer level has been observed in-situ by use of a confocal scanning laser microscope combined with an infrared image furnace. The $Pd_{40}Cu_{30}Ni_{10}P_{20}$ alloy specimens were cooled from the liquid state to glass transition temperature. 575 K, at various cooling late under a helium gas flow. According to the cooling rate, the morphologies of the solidification front are changed among various types, irregular jog like front, columnar dendritic front, cellular grain, star like shape jog and fine grain, etc. The velocities of the solid-liquid interface are measured to be $10^{-5}{\sim}10^{-8}$ m/s which are at least two orders higher than the theoretical crystal growth rates. Combining the morphologies observed in terms of cooling rates and their solidification behaviors, we conclude that phase separation takes place in the undercooled molten $Pd_{40}Cu_{30}Ni_{10}P_{20}$ alloy. The continuous cooling transformation (CCT) diagram was constructed from solidification onset time at various linear cooling conditions with different rate. The CCT diagram suggests that the critical cooling rate for glassy solidification is about 1.5 K/s, which is in agreement with the previous calorimetric findings.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.260-268
• /
• 2015

The thermal barrier coating (TBC) for inner wall of liquid-fuel rocket combustor consists of NiCrAlY as bonding layer and $ZrO_2$ as a top layer. In most case, the plasma spray coating is used for TBC process and this process has inherent possibility of cracking due to large difference in thermal expansion coefficients among bonding layer, top layer and metal substrate. In this paper, we suggest crack-free TBC process by using a precise electrodeposition technique. Electrodeposited Ni-P/Cr double layer has similar thermal expansion coefficient to the Cu alloy substrate resulting in superior thermal barrier performance and high temperature oxidation resistance. We studied the effects of phosphorous concentrations (2.12 wt%, 6.97 wt%, and 10.53 wt%) on the annealing behavior ($750^{\circ}C$) of Ni-P samples and Cr double layered electrodeposits. Annealing temperature was simulated by combustion test condition. Also, we conducted SEM/EDS and XRD analysis for Ni-P/Cr samples. The results showed that the band layers between Ni-P and Cr are Ni and Cr, and has no formed with heat treatment. These band layers were solid solution of Cr and Ni which is formed by interdiffusion of both alloy elements. In addition, the P was not found in it. The thickness of band layer was increased with increasing annealing time. We expected that the band layer can improve the adhesion between Cr and Ni-P.

• 한국습지학회지
• /
• 제24권4호
• /
• pp.345-353
• /
• 2022

산업과 생활환경에서 사용된 공학적 미세입자는 결국 하수처리장을 거쳐 수계로 배출되므로 미세입자의 수계 배출 제어에 매우 중요한 역할을 담당하고 있다. 그러나 다수 연구에서 하수처리장 유출수 내 미세입자의 농도가 무영향관찰농도(No Observed Effective Concentration, NOEC)를 빈번히 초과하고 있는 것으로 보고되고 있어 전통적인 하수처리 기능과 더불어 미세입자를 보다 효과적으로 제어할 수 있도록 하수처리장의 설계와 운영을 최적화시킬 필요가 있다. 이를 위해서는 하수처리장 내 단위공정별 특성 및 운전조건에 따른 미세입자의 거동특성과 제거효율에 대한 예측이 선행되어야 한다. 이에 본 연구에서는 하수처리장 내 각 공정 특성별 및 주요 운전조건의 영향에 따른 미세입자 제거효율예측을 위한 모델을 개발함으로써 하수처리장에서 미세입자를 보다 효율적으로 제어하기 위한 도구를 제공하고자 하였다. 개발 모델에서는 수처리 계통에서의 4개 단위공정(1차침전지, 생물반응조, 2차침전지, 및 총인처리시설)을 고려하고, 슬러지처리 계통은 농축, 소화, 탈수 공정 등의 다중 공정을 통합한 단일 공정으로 모의한다. 모의 대상 미세입자는 TiO₂ (nano-TiO₂)로서, 수중에서의 용해와 변환은 미미하므로 부유성 고형물과의 부착 기작만을 고려하였다. 부유성고형물에의 nano-TiO₂ 부착 기작은 고-액상 간 평형가정에 기반한 겉보기분배계수(Kd)를 매개변수로 반영하였으며 정상상태에서의 미세입자의 농도 및 부하를 공정별로 계산할 수 있도록 하였다. 아울러 개발 모델 구동의 편의를 위하여 MS 엑셀기반 사용자 인터페이스를 제작하였다. 개발 모델을 이용하여 주요 운전인자인 고형물체류시간(Solid Retention Time, SRT)이 nano-TiO₂ 제거효율에 미치는 영향을 파악하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.389-390
• /
• 2012

In this study, we fabricate a superhydrophobic surface made of hierarchical nanostructures that combine wax crystalline structure with moth-eye structure using vacuum cluster system and measure their hydrophobicity and durability. Since the lotus effect was found, much work has been done on studying self-cleaning surface for decades. The surface of lotus leaf consists of multi-level layers of micro scale papillose epidermal cells and epicuticular wax crystalloids [1]. This hierarchical structure has superhydrophobic property because the sufficiently rough surface allows air pockets to form easily below the liquid, the so-called Cassie state, so that the relatively small area of water/solid interface makes the energetic cost associated with corresponding water/air interfaces smaller than the energy gained [2]. Various nanostructures have been reported for fabricating the self-cleaning surface but in general, they have the problem of low durability. More than two nanostructures on a surface can be integrated together to increase hydrophobicity and durability of the surface as in the lotus leaf [3,5]. As one of the bio-inspired nanostructures, we introduce a hierarchical nanostructure fabricated with a high vacuum cluster system. A hierarchical nanostructure is a combination of moth-eye structure with an average pitch of 300 nm and height of 700 nm, and the wax crystalline structure with an average width and height of 200 nm. The moth-eye structure is fabricated with deep reactive ion etching (DRIE) process. $SiO_2$ layer is initially deposited on a glass substrate using PECVD in the cluster system. Then, Au seed layer is deposited for a few second using DC sputtering process to provide stochastic mask for etching the underlying $SiO_2$ layer with ICP-RIE so that moth-eye structure can be fabricated. Additionally, n-hexatriacontane paraffin wax ($C_{36}H_{74}$) is deposited on the moth-eye structure in a thermal evaporator and self-recrystallized at $40^{\circ}C$ for 4h [4]. All of steps are conducted utilizing vacuum cluster system to minimize the contamination. The water contact angles are measured by tensiometer. The morphology of the surface is characterized using SEM and AFM and the reflectance is measured by spectrophotometer.

• 한국결정성장학회지
• /
• 제26권1호
• /
• pp.1-7
• /
• 2016

RE : YAG 단결정은 레이저 발진 소재로 다양한 성장 변수를 제어하면서 Czochralski법으로 성장된다. 성장과정 동안 고액계면의 온도구배 및 회전속도에 의해 발생하는 결함들은 결정의 광학적 특성 저하로 작용하기 때문에 결함 분석을 통한 결정 품질의 향상을 필요로 한다. 격자결함 밀도 분석(EPD)을 통하여 성장된 RE : YAG 단결정의 표면 결함 존재를 확인하였고, 이를 통해 투과전자현미경(TEM) 분석영역을 선택하였다. 선택한 영역의 시편은 트라이포드 연마 방법으로 제작하였고, 200 kV 투과전자현미경과 300 kV 전계 방사형 투과전자현미경(FE-TEM)을 사용하여 buckling, rod shaped, 내부응력에 의한 bend contours, 편석 등의 결함들을 관찰하였다.

• 대한기계학회논문집B
• /
• 제24권11호
• /
• pp.1497-1505
• /
• 2000

A numerical study is made on the ice-formation for a laminar flow in a curved channel. When the water flows through the curved channel with the walls specified below the freezing temperature, the ice layer has been formed on the curved surface, different from that of a straight channel. The fluctuation of ice layer has been predicted, considering the variation of velocity and temperature near the curved portion of channel. The study also takes into account the interaction existing between the laminar flow and the curved channel. In the solution strategy, the present study is substantially different from the existing works in that the complete set of governing equations in both the solid and liquid regions are resolved. The results from this study have been mainly presented, focusing on the variation of ice layer close to the curved portion. Numerical results have been obtained parametrically by varying the curved angle and the radius of curvature of channel, in addition to the variation of Reynolds numbers and wall temperatures of channel. The results show that the curved shape of channel has the great effect on the thickness of the solidification layer. The wave of ice layer thickness appears in the vicinity of curved portion. This behavior of ice layer has been amplified as is the increasing of curved angle and the radius of curvature of channel. In addition, the ice layer becomes thin as Reynolds numbers in increasing. And also, as the wall temperature of channel increases, the width of channel becomes to be shrunk due to the growth of ice layers in the upper and lower wall of channel.

• 한국결정학회지
• /
• 제6권2호
• /
• pp.141-157
• /
• 1995

직경자동제어장치를 이용한 초크라스키법에 의해 대형 TeO2 단결정을 공기 중에서 성장시켰다. 온도구배를 가능한 한 적게 한 성장조건 하에서 단결정과 도가니의 직경비율을 60-70% 범위에서 양질의 단결정 성장이 가능하였다. 이 때 결정의 품질을 좌우하는 주요 요인은 인상 및 회전 속도였다. 무색 투명한 고품질 단결정을 육성하기 위한 인상속도는 1.2mm/hr 이하였고, 고액계면은 10-23 rpm 이하일 때 볼록하였으며, 25 rpm 이상일 때 오목하였다. 단결정의 성장은 {110} 방향의 종자결정을 사용하였다. 용융체 내의 백금 함량이 증가하면 조성적 과냉이 발생하여, 성장되는 결정 내에 기포가 포획되므로 성장된 단결정의 질이 저하된다. 적외선 측정결과 파수 2,000cm-1 이상에서 완전 투명하였고, 전위밀도를 측정 결과 직경자동제어를 이용한 경우 3×103/cm2 - 2×104/cm2로 양호하였으며 수동성장인 경우도 결정과 도가니의 직경비율이 40-45%의 범위에서는 매우 양호하였다. 또한 포유물 등 불순물에 혼입 원인에 대하여 논하였다.