• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.237-254
• /
• 2019

This study is focused on the effect of sodium stearate, which is a hydrophilic gelling agent affecting on the hardness of O/W solid sunscreen cosmetic. The sunscreen of the O/W (oil in water) type is stable, good in use, and relatively easier to stabilize than the sunscreen of the W/O (water in oil) type. Methods for increasing the stability by using emulsifiers, electrolytes, and wax or oil have been studied for solid sunscreen. This study was intended to develop a solid sunscreen stabilized by increasing the hardness using sodium stearate as an O/W type containing more than 40% moisture. Response surface methodology (RSM) was used to analyze the factors affecting the hardness of cosmetics, and sodium stearate, polyol and oil were used for each factor. The hardness and the reaction value was measured using a rheometer. As a result, sodium stearate showed a meaningful value (p < 0.05) among the three factors affecting hardness. In addition, the use of sodium stearate as a hydrophilic gelling agent increased the usability and stability of the solid sunscreen.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.59-66
• /
• 2020

In this study, self - healing solid capsules of crystal growth type which can be mixed directly with repair mortar were prepared, and the quality and crack healing performance of repair mortar with self - healing solid capsules were evaluated. The table flow and the air flow rate of the repair mortar material mixed with self-healing solid capsules were found to have no significant influence on table flow and air volume regardless of mixing ratio. Compressive strength tended to decrease with increasing capsule mixing ratio. As a result of evaluation of crack healing properties according to constant water head permeability test, initial water permeability decreased, and reaction products were generated over time and cracks were healed.

• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.2 no.1
• /
• pp.1-23
• /
• 1996

In order to research the effects of Shipjundaebotang(SDT) and Orostachys Herba(OH) on anti-tumor and immune response, the author performed this experimental study. Experimental groups are divided into five groups, which are solid extract of Orostachys Herba by water(OHW), solid extract of Orostachys Herba by ethanol(OHE), solid extract of Shipjundaebotang (SDT), solid extract of Shipjundaebotang added by solid extract of Orostachys Herba by water(SDT+OHW) and solid extract of Shipjundaebotang added by solid extract of Orostachys Herba by ethanol (SDT+OHE). In these experimental studies, extension of survival days for anti-tumor effect was observed, and de layed type hypersensitivity and rosette forming cell for cell-mediated immune response, hemagglutinin titers and hemolysin titers for humeral immune response, spleenic natural killer cell activity and carbon clearance (K-index) in vitro were measured with mice. The result were summerized as follows: I. SDT, SDT+OHW and SDT+OHE treated groups were significantly recognized to extend the survival days of tumor bearing mice as compared with the control group. 2. Delayed type hypersensitivity was significantly increased in SDT, SDT+OHW and SDT+OHE treated groups as compared with control group. 3. Hemagglutinin titer was increasred in all sample groups as compared with control group, but not significantly. 4. Hemolysin titers was significantly increased in SDT, SDT+OHW and SDT+OHE treated groups as compared with control group, and SDT+OHE treated group showed the increasing effect with significance as compared with the other sample groups. 5. For the effect of roselle forming cell quantitation, SDT, SDT+OHW and SDT+OHE treated groups showed the increasing effect with significance as compared with control group. 6. Natural killer cell activity was significantly increased in SDT+OHW as compared with comrol group, but the other groups, except OHW and SDT+OHW treated groups, revealed the increasing effect as compared with control group, but the significance was not admitted. 7. For the effect of K-index(Carbon clearance), SDT, SDT+OHW and SDT+OHE treated groups showed the increas ing effect with significance as compared with control group. 8. The study didn't show that Orostachys herba had any significance with survival days, anti-tumor effect and immune re sponse.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.2
• /
• pp.86-91
• /
• 2005

The layered structure of organic-inorganic perovskite hybrids, $(C_nH_{2n+1}NH_3)_2CuC1_4$ (n = 6, 8, 10, 12) have synthesized. In $(C_nH_{2n+1}NH_3)_2CuC1_4$ compounds, the long-chain protonated alkylammonium ions as tilted bilayer type are inserted into perovskite-type layers of corner sharing $CuCl_6$ octahedron. Three solid phases have been characterized in the perovskite layered compound $(C_nH_{2n+1}NH_3)_2CuC1_4$ using HT-XRD and DSC. The $(C_nH_{2n+1}NH_3)_2CuC1_4$ compounds shows solid-solid phase transitions with stepwise increasing of the layer distance. Three different structures are explained by the conformational change of the long-chain protonated alkylammonium ions.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.1
• /
• pp.61-72
• /
• 1995

The author performed radionuclide esophageal transit studies(RETS) with liquid and solid boluses using the same day protocol in 90 normal controls and 164 patients with various primary esophageal motility disorders who were diagnosed by manometric criteria and clinical courses. The authors calculated mean esophageal transit time(MTT) and mean residual retention(MRR) in each of the liquid and solid studies, and classified time-activity curve(TAC) patterns. The normal criteria of RETS with liquid bolus were MTT<24 sec, MRR<9%, and the TAC pattern that showed rapid declining slope and flat low residual(Type 1). The normal criteria of RETS with solid bolus were MTT<35 sec, MRR<9% and TAC of type 1. With these normal criteria, the sensitivity and the specificity of the liquid study were 62.2 % and 97.8%, respectively. The sensitivity increased to 75.4% with the solid study. The author also found that the RETS was highly reproducible. The achalasia typically showed no effective emptying of both liquid and solid boluses during the whole study period, and was well differentiated by its extremely long transit time and high retention from the other motility disorders. The diffuse esophageal spasm (DES) and nonspecific esophageal motility disorder(NEMD) showed intermediate delay in transit time and increased retention. In the groups of hypertensive lower esophageal sphincter(LES), hypotensive LES and nutcracker, there noted no significant difference with the normal control group in terms of MTT and MRR. The DES and NEMD could be more easily identified by solid studies that showed more marked delay in MTT and increased MRR as compared with the liquid study. In conclusion, esophageal scintigraphy is a safe, noninvasive and physiologic method for the evaluation of esophageal emptying.

• Journal of Ceramic Processing Research
• /
• v.19 no.5
• /
• pp.413-418
• /
• 2018

All-solid-state lithium batteries (ASSBs) using inorganic sulfide-based solid electrolytes are considered prospective alternatives to existing liquid electrolyte-based batteries owing to benefits such as non-flammability. However, it is difficult to form a favorable solid-solid interface among electrode constituents because all the constituents are solid particles. It is important to form an effective electron conduction network in composite cathode while increasing utilization of active materials and not blocking the lithium ion path, resulting in excellent cell performance. In this study, a mixture of fibrous VGCF and spherical nano-sized Super P was used to improve rate performance by fabricating valid conduction paths in composite cathodes. Then, composite cathodes of ASSBs containing 70% and 80% active materials ($LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$) were prepared by a solution-based process to achieve uniform dispersion of the electrode components in the slurry. We investigated the influence of binary carbon additives in the cathode of all-solid-state batteries to improve rate performance by constructing an effective electron conduction network.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.2
• /
• pp.96-107
• /
• 2018

Flow analysis using computational fluid dynamics was conducted to investigate the effect of the igniter flame caused by the gap between the igniter and the propellant grain in a solid rocket motor. Two propellant grain types were assumed; namely cylinder type (1 mm, 3 mm, and 5 mm gap) and the slot type. The slot type had two igniter hole locations. One was located at the small gap of the propellant grain, and the other one was located at the large gap. In the case of the cylinder type, the pressure in the igniter zone was higher with a thinner gap. Additionally, in the case of the cylinder type, the pressure difference between the igniter installed zone and the free volume was also higher as the gap became lower. The cylinder types were affected by the gap distance, but the slot types were not. Moreover, the results of the slot types were similar to the 5-mm gap case of the cylinder type.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1400-1403
• /
• 2007

The 3DP(three dimensional printing) technology is one of the SFF(solid freeform fabrication) technologies which has recently come into a spotlight due to its suitability to various field. A manufacturing process of product is using many pattern formation technology. The 3DP technology uses multi nozzle that can fabricate three dimensional object of high speed and accuracy. In this paper, we introduce a development of the office type solid freeform fabrication system. This system is used UV resin and multi-piezo head.

• Journal of the Korean Magnetic Resonance Society
• /
• v.5 no.1
• /
• pp.19-28
• /
• 2001

Miscibility and morphology in blends of bisphenol-A type polycarbonate and poly (ester-ether) elastomer with different compositions are studied by solid-state NMR spectroscopy. $^{13}$ C Solid-state NMR of CP/MAS/TOSS/DD, CP/MAS/DD, inversion recovery CP/MAS/DD, and 2D rotor driven spin diffusion techniques are used to identify the miscibility, morphology, and transesterification in blends. The blends of PC /BT elastomer with 15% to 42% of soft segment seem to be single phase miscible mixing and those of PC/PBT and PC/PBT elastomer with 62% of soft segment are cocontinuous two phase immiscible mixing. No significant transesterification reactions are observed in blends with different compositions.

• Journal of the Korean Ceramic Society
• /
• v.48 no.2
• /
• pp.178-182
• /
• 2011

The Rutile - type brown pigments doped with chromium were synthesized. Samples of $Ti_{1-x}Cr_xO_2$ ($0.02{\leq}X{\leq}0.08$) were synthesized by the solid state method. Solid solution limit of Cr contents to the rutile structure and its coloration were studied. Optimum composition was investigated accordingly. The characteristics of synthesized pigments were analyzed by XRD, SEM, Raman spectroscopy and UV. As a result, single phase of Rutile was observed from $1000^{\circ}C$ by XRD. The maximum limit of solid solution was 0.06 mole $Cr_2O_3$. The glazed sample showed brown color, and the value of CIE $L^*a^*b^*$ was $L^*$ 33.27, $a^*$ 10.64, $b^*$ 20.84.