• Microbiology and Biotechnology Letters
• /
• v.19 no.4
• /
• pp.377-382
• /
• 1991

Reef tallow was hydrolyzed with lipase under the conditions of liquid state and solid state. Lipase OF 360 was used for that purpose, and the lipase had the maximum activity when the olive oil was used as a substrate at pH 6 and $37^{\circ}C$. Beef tallow was dispersed by an agitator to perform a liquid enzymatic reaction. Water content, reaction temperature, and enzyme amount were varied as parameters affecting hydrolysis percentage. Ninety three percents of tallow were hydrolyzed at the following conditions: water content 80% w/w, temperature $37^{\circ}C$, and enzyme amount 200 unitlg tallow. In order to conduct a solid phase enzymatic reaction, sonication was employed for pretreating tallow with the enzyme solution. Molten tallow was sonified with the enzyme solution, and solidified by lowering temperature. And then hydrolysis reaction proceeded at $30^{\circ}C$. Sonication intensity and time were varied to control hydrolysis percentage. Optimum values of the intensity and the time were found to exist since the hydrolysis percentage did not increase further according to the increases of the intensity and the time.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.39-44
• /
• 2012

To improve flame retardation of poly(ethylene terephthalate) (PET) against burning, resorcinol bis(diphenyl phosphate) (RDP), phosphorous containing flame retardant, was incorporated into PET backbone by radical reaction pathway. Radical endcapping of PET with RDP was confirmed by spectroscopic and thermal analysis. From 400 MHz $^{31}P$ solid state FT-NMR spectrum of PET with RDP (PET-RDP), phosphorus spectra peak in RDP was found at ca. -10 ppm. Furthermore, P-C bond stretching vibration peaks were found ca. $530cm^{-1}$ in FT-IR spectrums of PET-RDP. These results indicated that RDP can be chemically bound at the ends of PET by radical addition method. Thermal characteristics of pure PET (pPET) and PET-RDP were measured and evaluated by TGA thermal analysis. There was not significant changes in thermal characteristics of PET-RDP compared to that of pPET.

• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.881-885
• /
• 2001

Kinetics and mechanisms of intermediate phases formation in $Ba(Mg_{1/3}Ta_{2/3})O_3$, obtained by a solid state reaction were studied. $Ba{Ta_2}{O_6}$ and ${Ba_4}{Ta_2}{O_9}$ as intermediate products were first formed at $700^{\circ}C$. $Ba(Mg_{1/3}Ta_{2/3})O_3$ was appeared at $800^{\circ}C$. Several reactions take place on heating process. $Ba{Ta_2}{O_6}$ is found at the first stage of the reaction, and then $Ba{Ta_2}{O_6}$ or ${Ba_4}{Ta_2}{O_9}$ react with MgO to form $Ba(Mg_{1/3}Ta_{2/3})O_3$. The reaction of $Ba(Mg_{1/3}Ta_{2/3})O_3$ formation does not complete until fired at $1350^{\circ}C$ for 60 min. The kinetics of solid-state reaction between powdered reactants was controlled by diffusion mechanism, and can be explained by the Jander's model for three-dimensional diffusion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.228-233
• /
• 2010

Mn-doped $Zn_2SiO_4$ phosphor particles having submicrometer sizes were synthesized by a solid-state reaction method using methyl hydrogen polysiloxane-treated ZnO, fumed $SiO_2$ and various Mn sources. The crystallization and photoluminescent properties of the phosphor particles were investigated by X-ray diffraction(XRD), scanning electron microscope(SEM), and by their photoluminescence(PL) spectra. Due to the effect of the dispersion and coherence of the methyl hydrogen polysiloxane-treated ZnO, the Mn-doped $Zn_2SiO_4$ particles were successfully obtained by a solid state method at $1000^{\circ}C$, and the maximum PL intensity of the prepared particles under vacuum ultra violet(VUV) excitation occurred at a Mn concentration of 0.02mol and a sintering temperature of $1000^{\circ}C$.

• Applied Science and Convergence Technology
• /
• v.25 no.4
• /
• pp.77-80
• /
• 2016

The $PbSc_{1/2}Nb_{1/2}O_3$ ceramics at a relatively low temperature of $1300^{\circ}C$ was successful synthesized. Solid state reaction of two-step process is not necessary. The dielectric constant, dielectric loss and admittance of ceramic samples were determined. The pyroelectric characteristics are in good agreement with the dielectric properties. Ferroelectric properties of well-formed the $PbSc_{1/2}Nb_{1/2}O_3$ ceramics are in agreement with broad distribution of relaxation phenomenon. Relatively strong frequency dependent of dielectric constant is observed at about $110^{\circ}C$. The distinct thermal hysteresis was observed in the measurement of the dielectric constant and dielectric loss. The critical exponents of during cooling and heating measurements in the $PbSc_{1/2}Nb_{1/2}O_3$ ceramics were 1.14 and 1.59 at 1 kHz, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.451-451
• /
• 2014

중고온 열전재료로서의 응용 가능성이 높은 HMS (higher manganese silicide)는 높은 제백계수, 낮은 전기저항, 높은 산화 저항성뿐만 아니라 구성 원소가 풍부하며 친환경적인 열전재료이다. HMS는 주로 용해/응고법, 단결정 성장법에 의해 합성되지만, 구조적인 불균질성 및 많은 합성 에너지를 소비하는 단점이 있다. 또한 진성 HMS는 비교적 낮은 열전특성을 나타내기 때문에 도핑에 의한 열전특성의 개선이 필요하다. 본 연구에서는 HMS의 한 종류인 MnSi1.73에 Cr을 도핑한 화합물 MnSi1.73:Crx (x=0, 0.005, 0.01, 0.02, 0.03)를 고상반응(solid state reaction)과 진공 열간압축성형(hot pressing)을 통해 제조하였다. XRD와 Rietveld refinement를 통해 상변화 및 상분율을 분석하였고, 323~823 K까지 전기적 및 열적 특성을 측정하여 열전 성능지수(ZT)를 평가하였다.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.2 s.19
• /
• pp.65-68
• /
• 2007

High brightness and long persistent luminescence phosphor $CaAl_2O_4:Eu^{2+}$ was prepared with varying $Eu^{2+}$ concentration by solid state reaction technique. Synthesized materials were investigated by powder X-ray diffractometer (XRD), SEM, TEM, photoluminescence excitation and emission spectra. Broad band UV excited luminescence of the $CaAl_2O_4:Eu^{2+}$ was observed in the blue region (${\lambda}_{max}\;=\;440\;nm$) due to transitions from the $4f^65d^1$ to the $4f^7$ configuration of the $Eu^{2+}$ ion. The decay time of the persistence indicated that the persistent luminescence phosphor has bright phosphorescence and maintains a long duration. These materials have great potential for outdoor night time displays.

• Journal of the Korean Ceramic Society
• /
• v.28 no.1
• /
• pp.74-78
• /
• 1991

Willemite powders which have been prepared by solid state reaction were easy to intermixed impurities, and particle surfaces were demaged in the progress of crushing. The above defacts were easy to accompany non-crystallization for mechanochemical effects and luminescence efficiency was deteriorated. The goal of this study improve each of defacts, and synthesize high purity and fine Mn doped willemite powders by wet and hydrothermal methods without crushing progress. It has been experimentally verified that the single phase Zn1.98Mn0.02SiO4 willemite powders which prepared by hydrothermal synthes is at 220$^{\circ}C$ for 10 hours in 2N KOH solution. The products are like needle and composition is the same with starting composition.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.1027-1033
• /
• 1990

In order to identify the origin of phase coexistence at morphotropic tetragonal and rhombohedral boundary in PZT ceramics, the effect of chemical inhomogeneity on phase coexistence region was investigated. Two kinds of PZT ceramics with different chemical homogeneity were prepared by conventional solid state reaction and co-precipitation method. There was coexistence of tetragonal and rhombohedral phase over a wide composition range in PZT ceramics calcined by solid state reaction, and there was also phase coexistence of which region was reduced considerably in sintered samples. And phase coexistence region was not observed in co-precipitated PZT ceramics(within 1 mole%). Therefore compositional fluctuation is considered to be major origin of the phase coexistence at morphotropic phae boundary in PZT ceramics.

• Journal of the Korean Ceramic Society
• /
• v.37 no.8
• /
• pp.787-791
• /
• 2000

Samples with the nominal composition, Bi2-xGexSr2CaCu2O8＋$\delta$ (x=0, 0.1, 0.2, 0.3, 0.4, 0.5) were prepared by the solid-state reaction method. We have studied the effect of substitution Ge for Bi and investigated the superconducting properties by changing oxygen content with Ge substitution. It was found that temperature difference, ΔK, between TCon and TCzero was considerably smaller in the samples prepared by the intermediate pressing method than that in the samples by the solid-state reaction method. We found the solubility limit of Ge to the 80 K single phase was around x=0.3. Within the solubility limit, lattice constant c decreased with the increase of x. In the region of the 80K single phase, the onset critical temperature TCon increased and excess oxygen content decreased with increase of x.