• 한국재료학회지
• /
• 제14권5호
• /
• pp.305-309
• /
• 2004

Mechanical alloying (MA) of Ti-25.0～37.5at%Si powders was carried out in a high-energy ball mill, and in situ thermal analysis was also made during MA. In order to classify the synthesis behavior of the powders with respect to at%Si, the synthesis behavior during MA was investigated by in situ thermal analysis and X-ray diffraction (XRD). In situ thermal analysis curves and XRD patterns of Ti-25.0～26.1at%Si powders showed that there were no peaks during MA, indicating $Ti_{5}$ $Si_3$ was synthesised by a slow reaction of solid state diffusion. Those of Ti-27.1～37.5at%Si powders, however, showed that there were exothermic peaks during MA, indicating $_Ti{5}$ $Si_3$ and$ Ti_3$Si phase formation by a rapid exothermic reaction of self-propagating high-temperature synthesis (SHS). For Ti-27.1～37.5at%Si powders, the critical milling times for SHS decreased from 38.1 to 18.5 min and the temperature rise, ΔT (= peak temperature - onset temperature) increased form $19.5^{\circ}C$ to $26.7^{\circ}C$ as at%Si increased. The critical composition of Si for SHS reaction was found to be 27.1at% and the critical value of the negative heat of formation of Ti-27.1at%Si to be -1.32 kJ/g.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.604-610
• /
• 2011

The effect of $BaF_2$ flux in $Y_3Al_5O_{12}:Ce^{3+}$(YAG:Ce) formation was investigated. Phase transformation of $Y_3Al_5O_{12}$(YAG) was characterized by using XRD, SEM, and TEM-EDS, and it was revealed that the sequential formation of the $Y_4Al_2O_9$(YAM), $YAlO_3$(YAP) and $Y_3Al_5O_{12}$(YAG) in the temperature range of 1000-1500$^{\circ}C$. Single phase of YAG was revealed from 1300$^{\circ}C$. In order to find out the effect of $BaF_2$ flux, three modeling experiments between starting materials (1.5$Al_2O_3$-2.5$Y_2O_3$, $Y_2O_3$-$BaF_2$, and $Al_2O_3$-$BaF_2$) were done. These modeling experiments showed that the nucleation process occurs via the dissolution-precipitation mechanism, whereas the grain growth process is controlled via the liquid-phase diffusion route. YAG:Ce phosphor particles prepared using a proposed technique exhibit a spherical shape, high crystallinity, and an emission intensity. According to the experimental results conducted in this investigation, 5% of $BaF_2$ was the best concentration for physical, chemical and optical properties of $Y_3Al_5O_{12}:Ce^{3+}$(YAG:Ce) that is approximately 10-15% greater than that of commercial phosphor powder.

• 대한화학회지
• /
• 제65권2호
• /
• pp.93-105
• /
• 2021

Mononuclear Cu(II), Ni(II), Co(II), Mn(II), Zn(II), Fe(III), Ru(III), and UO2(II) complexes of 2-hydroxy-4-(p-tolyldiazenyl)benzylidene)-2-(p-tolylamino)acetohydrazide (H2L) were prepared by direct method. The ligand and its complexes were isolated in solid state and characterized by analytical techniques such as elemental and thermal analyses, molar conductance, magnetic susceptibility measurements and spectroscopic techniques such as UV-Visible, IR, 1H-NMR and 13C-NMR. The spectral data indicated that the ligand acted as neutral/monobasic bidentate or monobasic/dibasic tridentate ligand bonded to the metal ions through the oxygen atom of ketonic or enolic carbonyl group, azomethine nitrogen atom and deprotonated/protonated phenolic oxygen atom forming either tetragonally distorted octahedral or octahedral. Antimicrobial activities of the ligand and its complexes were evaluated against Escherichia coli, Bacillus subtilis and Aspergillus niger by well diffusion method. The results of antifungal activity showed that the Fe(III) complex (10) exhibited higher antifungal against Aspergillus niger than the other complexes. However, the results of antibacterial activity revealed that Cu(II) complex (4) is the most active against Escherichia coli while the Cu(II) complex (5) and Fe(III) complex (10) exhibited higher antibacterial effect on Bacillus subtilis than the other complexes.

• 대한금속재료학회지
• /
• 제47권8호
• /
• pp.488-493
• /
• 2009

Direct syntheses of bulk $Ti_3Al$ via electro-discharge-sintering (EDS) of a stoichiometric elemental powder mixture were investigated. A capacitor bank of $450{\mu}F$ was charged with three input energies, 0.5, 1.0, and 1.5 kJ. The charged capacitor bank was then instantaneously discharged through 0.3 g of a Ti-25.0 at.%Al powder mixture for consolidation. Complete phase transformation occurred in less than $200{\mu}sec$ by the discharge and a bulk $Ti_3Al$ compact was obtained. Compared with consolidated samples fabricated by conventional methods such as high vacuum sintering and casting, the electro-discharge-sintered $Ti_3Al$ compact shows a very fine microstructure with a hardness value of 425 Hv. Electro-discharge-sintering under a $N_2$ atmosphere successfully modified the surface Ti oxide of the $Ti_3Al$ compact into Ti nitride, which concurred with the synthesis and consolidation of $Ti_3Al$. Complete conversion yielding a single phase $Ti_3Al$ is primarily dominated by the fast solid state diffusion reaction.

• Earthquakes and Structures
• /
• 제27권2호
• /
• pp.127-142
• /
• 2024

The amount of wave propagation through a rubber concrete construction is the subject of the current investigation. Rubber tire waste was used to make two different types of cement mixtures. One type contains sand substitute in amounts ranging from 15% to 60% of the total volume, while the other has gravel with diameters of 3/8 and 8/15 and 15% sand in the same mixture. A wide variety of concrete forms and compositions were created, and their viscous and solid state characteristics were assessed, along with their short-, medium-, and long-term strengths. Diffusion, density, mechanical strength resistance to compressive force, and ultrasound wave propagation were also assessed. The water-to-cement ratio and plasticizer were used in this investigation. In the second part of the study, an analytical model is presented that simulates the experimental model in predicting the speed of waves and the frequencies accompanying them for this type of mixture. Higher order shear deformation beam theory for wave propagation in the rubberized concrete beam is developed, considering the bidirectional distribution, which is primarily expressed by the density, the Poisson coefficient, and Young's modulus. Hamilton's concept is used to determine the governing equations of the wave propagation in the rubberized concrete beam structure. When the analytical and experimental results for rubber concrete beams were compared, the outcomes were very comparable. The addition of rubber gravel and sandy rubber to the mixture both resulted in a discernible drop in velocities and frequencies, according to the data.

• 한국식품과학회지
• /
• 제10권4호
• /
• pp.398-403
• /
• 1978

고체입자를 열매체로 유동화시킨 유동층내에서 오징어를 고정시켜 건조시킬 때 유동화입자, grid로 부터의 오징어 고정위치, 온도가 오징어의 건조속도와 품질에 미치는 영향을 검토하였으며 또한 감율건조기간중 수분의 이동 메카니즘을 추론하였다. 1) 유동화입자로는 식염이 가장 바람직했고 풍속 3.8 m/sec에서 최적 유동화상태를 얻었다. 2) 유동층내에서의 균일온도 분포는 grid로 부터 4 cm 이상거리에서 얻었으며 따라서 오징어의 고정위치는 이 거리 이상에서 바람직한 것으로 관찰되었다. 3) 풍속 3.8m/sec, grid로부터 4 cm 이상되는 오징어의 고정위치에서 건조속도에 대한 최적온도는 $35^{\circ}C$에서 얻었으며 이 조건에서 초기수분 80.8%로 부터 최종수분 $18{\sim}22%$까지 건조하는 데 소요되는 시간은 8.5시 간 이었다. 4) 건조자료는 측정된 수분함량범위에서 비정상상태의 확산방정식 $ln{\frac{(W-We}{(Wc-We)}=-m{\theta}$의 경험식에 따랐으며 m의 값은 $0.32hr^{-1}$로 계산되었다. 또 이들 결과는 감율 건조기간중 수분의 이동이 액체확산에 의한 것임을 시사했다. 5) 오징어의 건조는 초기 짧은 시간 동안만 항율건조되고 그 이후는 감율건조에 의해 지배되는 것으로 나타났으며 동일온도에서 동일잔존수분까지 건조시키는 데 소요되는 유동층건조에 대한 통기 열풍건조의 건조시간비율은 1 : 1.4였다. 6) 유동충건조된 오징어 제품은 시판 천일건조 오징어 제품과 비교하여 품질상 유의차가 없었다.

• 한국방사선학회논문지
• /
• 제13권3호
• /
• pp.445-451
• /
• 2019

형광체 내 모체로 사용될 때 활성 이온 주위에 분포하여 형광 특성에 많은 영향을 미치는 알칼리 토금속인 $Ba^{2+}$ 이온을 기반으로 하는 바나데이트 화합물인 $Ba_2GdV_3O_{11}$에 희토류 이온 $Eu^{3+}$를 첨가하여 형광 강도 및 형광 수명을 연구하였다. 고상법을 이용하여 $Ba_2GdV_3O_{11}:Eu^{3+}$ 형광체를 합성하였으며 X선 회절 분석을 통하여 형광체의 결정성을 확인하였다. $Ba_2GdV_3O_{11}:Eu^{3+}$ 형광체의 형광특성은 광학 및 레이저를 이용하여 측정하였다. $Ba_2GdV_3O_{11}:Eu^{3+}$ 형광체의 에너지 전이와 확산은 $Eu^{3+}$의 농도에 크게 의존한다. $Eu^{3+}$의 농도가 낮을 때 CT 밴드로의 강한 형광을 보이나 $Eu^{3+}$의 농도가 높아질수록 4f - 4f 전이에 의한 형광이 강하게 나타난다. $Eu^{3+}$ 이온의 농도 증가로 인해 이온 간의 에너지가 확산되어 형광의 수명시간은 감소하였다. 에너지 전이는 낮은 $Eu^{3+}$ 농도에서 두 $Eu^{3+}$ 이온 사이에서 발생하며 에너지 확산은 높은 $Eu^{3+}$ 농도에서 크게 발생한다.

• 마이크로전자및패키징학회지
• /
• 제28권3호
• /
• pp.9-15
• /
• 2021

최근 반도체 소자의 소형화는 물리적 한계에 봉착했으며, 이를 극복하기 위한 방법 중 하나로 반도체 소자를 수직으로 쌓는 3D 패키징이 활발하게 개발되었다. 3D 패키징은 TSV, 웨이퍼 연삭, 본딩의 단위공정이 필요하며, 성능향상과 미세피치를 위해서 구리 본딩이 매우 중요하게 대두되고 있다. 본 연구에서는 대기중에서의 구리 표면의 산화방지와 저온 구리 본딩에 티타늄 나노 박막이 미치는 영향을 조사하였다. 상온과 200℃ 사이의 낮은 온도 범위에서 티타늄이 구리로 확산되는 속도가 구리가 티타늄으로 확산되는 속도보다 빠르게 나타났고, 이는 티타늄 나노 박막이 저온 구리 본딩에 효과적임을 보여준다. 12 nm 티타늄 박막은 구리 표면 위에 균일하게 증착되었고, 표면거칠기(R_q)를 4.1 nm에서 3.2 nm로 낮추었다. 티타늄 나노 박막을 이용한 구리 본딩은 200℃에서 1 시간 동안 진행하였고, 이후 동일한 온도와 시간 동안 열처리를 하였다. 본딩 이후 측정된 평균 전단강도는 13.2 MPa이었다.

• 한국재료학회지
• /
• 제3권6호
• /
• pp.614-623
• /
• 1993

높은 알칼리량을 함유하는 LiF-$Li_{2}O-B_{2}O_{3}-P_{2}O_5$계 유리의 전기적 특성을 분석하였다. $Li_{+}$ 이온은 모두 전기전도에 기여하지 않으나 조성에 따른 전기전도도의 변동은 약전해질 모델을 따르지 않았다. 또한 이동이온의 농도를 구하는데 사용되는 승법칙(power law)의 적용이 가능하지 않았다. 이들 계에서 조성에 따른 전기전도도의 변동은 유리내에서의 이동 가능한 $Li^{+}$이온의 농도변화만으로 또는 이동도의 변화만으로는 설명할 수 없었다. 전도도의 향상은 $(B-O-P)^{o}$ 보다 $Li^{+}$이온의 확산에 부가적인 자리를 제공하는$(B-O-P)^-,di^-$, 및 metaborate가 형성된 것과 관련이 있었다. 전기전도성이 가장 좋은 조성의 $150^{\circ}C$에서의 전기전도도는 $2.43 \times 10^{-4}$S/cm였고 분해포텐샬은 5.94V, emf는 3.14V였고 에너지 밀도는 22Wh/Kg이었다.

• 한국재료학회지
• /
• 제22권4호
• /
• pp.195-201
• /
• 2012

$Ce^{3+}$-doped yttrium aluminum gallium garnet (YAGG:$Ce^{3+}$), which is a green-emitting phosphor, was synthesized by solid state reaction using ${\alpha}$-phase or ${\gamma}$-phase of nano-sized $Al_2O_3$ as the Al source. The processing conditions and the chemical composition of phosphor for the maximum emission intensity were optimized on the basis of emission intensity under vacuum UV excitation. The optimum heating temperature for phosphor preparation was $1550^{\circ}C$. Photoluminescence properties of the synthesized phosphor were investigated in detail. From the excitation and emission spectra, it was confirmed that the YAGG:$Ce^{3+}$ phosphors effectively absorb the vacuum UV of 120-200 nm and emit green light positioned around 530 nm. The crystalline phase of the alumina nanoparticles affected the particle size and the luminescence property of the synthesized phosphors. Nano-sized ${\gamma}-Al_2O_3$ was more effective for the achievement of higher emission intensity than was nano-sized ${\alpha}-Al_2O_3$. This discrepancy is considered to be because the diffusion of $Al^{3+}$ into $Y_2O_3$ lattice is dependent on the crystalline phase of $Al_2O_3$, which affects the phase transformation of YAGG:$Ce^{3+}$ phosphors. The optimum chemical composition, having the maximum emission intensity, was $(Y_{2.98}Ce_{0.02})(Al_{2.8}Ga_{1.8})O_{11.4}$ prepared with ${\gamma}-Al_2O_3$. On the other hand, the decay time of the YAGG:$Ce^{3+}$ phosphors, irrespective of the crystalline phase of the nano-sized alumina source, was below 1 ms due to the allowed $5d{\rightarrow}4f$ transition of the $Ce^{3+}$ activator.