• 제목/요약/키워드: Solid loading rate

검색결과 90건 처리시간 0.031초

용담호 소유역별 인 및 부유물질 유입부하량 산정 (Phosphorus and Suspended Solid Loading in Lake Yongdam)

  • 권상용;김영길;이원호;김범철;허우명
    • 생태와환경
    • /
    • 제38권3호통권113호
    • /
    • pp.322-333
    • /
    • 2005
  • 2002년 4월부터 5개의 소유역으로부터 인 및 부유물질을 측정하였으며, 이를 근거로 부하량을 산정하였다. 총인 농도와 유량의 관계식은 주자천, 정자천, 진안천, 금강 및 구량천에서 각각 $TP\;=\;6.32Q^{0.30}$, $TP\;=\;8.58Q^{0.49}$, $TP\;=\;307.92Q^{-0.10}$, $TP\;=\;17.91Q^{0.47}$$TP\;=\;20.11Q^{0.53}$ 로 진안천을 제외하고는 양의 상관관계를 보였다. 2003년의 경우 총인의 부하량은 주자천, 정자천, 진안천, 금강 및 구량천에서 각각 3,677, 11,430, 36,412 ,89,651 및 42,226 kgP ${\cdot}$ $yr^{-1}$로 계산되었으며, 전체 부하량 중 각 유입수가 차지하는 양은 금강 (48.9%), 구량천 (23.0), 진안천(19.9%), 정자천 (6.2%), 주자천 (2.0%) 순이였다. 또한 단위면적당 부하량은 주자천, 정자천, 진안천, 금강, 구량천에서 각각 0.3, 2.9, 13.6, 9.3 및 13.0 kgP ${\cdot}$ $km^{-2}$ ${\cdot}$ $yr^{-1}$로 진안천에서 가장 크게 나타났다. 용담호 유입수의 부유물질 농도와 유량의 관계식은 주자천, 정자천, 진안천, 금강및 구량천에서 각각 $SS\;=\;0.37Q^{0.40}$, $SS\;=\;0.80Q^{0.35}$, $SS\;=\;11.03Q^{0.18}$, $SS\;=\;0.88Q^{0.77}$$SS\;=\;1.16Q^{0.97}$로 양의 상관관계를 나타냈으며, 2003년의 경우 부유물질의 부하량은 주자천, 정자천, 진안천,금강 및 구량천에서 각각 673, 1,232, 4,232, 36, 902, 80, 202 ton ${\cdot}$ $yr^{-1}$로 구량천에서 가장 많았다 용담호 유입수의 총인 및 부유물질은 강우량이 많았던 시기에 높은 농도를 보였으며, 유량과는 대부분 양의 상관을 보였다. 용담호의 경우 본 연구에서 산출한 경험식을 이용하여 유량만으로도 총인 및 부유물질의 농도를 추정할 수 있을 것으로 보인다. 그러나 유입하천 중 주자천과 진안천의 경우 상관관계가 낮아 경향성은 파악할수 있으나 좀더 정확한 부하량 산정을 위해서는 차후 연구가 더 필요할 것으로 생각된다. 용담호의 경우 인부하량을 줄이기 위해서는 강우에 따른 유출 관리가 철저히 이루어져야 하며 강우에 의해 유입될 수 있는 오염원도 정확히 조사되어야 할 것으로 판단된다.

Integrated Eco-Engineering Design for Sustainable Management of Fecal Sludge and Domestic Wastewater

  • Koottatep, Thammarat;Polprasert, Chongrak;Laugesen, Carsten H.
    • 한국습지학회지
    • /
    • 제9권1호
    • /
    • pp.69-78
    • /
    • 2007
  • Constructed wetlands and other aquatic systems have been successfully used for waste and wastewater treatment in either temperate or tropical regions. To treat waste or wastewater in a sustainable manner, the integrated eco-engineering designs are explained in this paper with 2 case studies: (i) a combination of vertical-flow constructed wetland (CW) with plant irrigation systemfor fecal sludge management and (ii) integrated CW units with landscaping at full-scale application for domestic wastewater treatment. The pilot-scale study of fecal sludge management employed 3 vertical-flow CW units, each with a dimension of $5{\times}5{\times}0.65m$ (width ${\times}$ length ${\times}$ media depth) and planted with cattails (Typha augustifolia). At the solid loading rate of 250 kg total solids (TS)/$m^2.yr$ and a 6-day percolate impoundment, the CW system could achieve chemical oxygen demand (COD), TS and total Kjeldahl nitrogen (TKN) removal efficiencies in the range of 80 - 96%. The accumulated sludge layers of about 80 - 90 cm was found at the CW bed surface after operating the CW units for 7 years, but no clogging problem has been observed. The CW percolate was applied to 16 irrigation Sunflower plant (Helianthus annuus) plots, each with a dimension of $4.5{\times}4.5m$ ($width{\times}length$). In the study, the CW percolate were fed to the treatment plots at the application rate of 7.5 mm/day but the percolate was mixed with tap water at different ratio of 20%, 80% and 100%. Based on a 1-year data of 3-crop plantation were experimented, the contents of Zn, Mn and Cu in soil of the experimental plots were found to increase with increasing in CW percolate ratios. The highest plant biomass yield and oil content of 1,000 kg/ha and 35%, respectively, were obtained from the plots fed with 20% or 50% of the CW percolate, whereas no accumulation of heavy metals in the plant tissues (i.e. leaves, stems and flowers) of the sunflower is found. In addition to the pilot-scale and field experiments, a case study of the integrated CW systems for wastewater treatment at Phi Phi Island (a Tsunami-hit area), Krabi province, Thailand is illustrated. The $5,200-m^2$ CW systems on Phi Phi Island are not only for treatment of $400m^3/day$ wastewater from hotels, households or other domestic activities, but also incorporating public consultation in the design processes, resulting in introducing the aesthetic landscaping as well as reusing of the treated effluent for irrigating green areas on the Island.

  • PDF

가압부상법(加壓浮上法)에 의한 활성(活性)슬러지 혼합액(混合液)의 고액분리(固液分離)에 관한 연구(研究) (A Study on the Separation of Activated Sludge by Dissolved Air Flotation)

  • 양상현;라덕관
    • 대한토목학회논문집
    • /
    • 제5권3호
    • /
    • pp.21-29
    • /
    • 1985
  • 활성(活性)슬러지가 팽화(膨化)를 하였거나 환기조내(環氣槽內)의 MLSS 농도(濃度)가 높은 경우, 종래(從來)의 중력침전법(重力沈澱法)으로는 슬러지의 분리(分離)가 어렵다. 이 문제(問題)의 해결책으로 가압부상법(加壓浮上法)을 이용(利用)하는 방법(方法) 연구(硏究)하였다. 가압부상법(加壓浮上法)의 효과(效果)에 영향(影響) 주는 인자중(因子中) 중요(重要)하다고 생각되는 환기조내(環氣槽內)의 MLSS 온도(溫度), 슬러지의 성상( 性狀), 가압수량비(加壓水量比), 압력(壓力)의 변화(變化)에 따른 가압부상법(加壓浮上法)의 효율(效率)에 관하여 회분식(回分式) 실험(實險)과 연속식(連續式) 실허(實驗)을 실시하여 다음과 같은 결과(結果)를 얻었다. 활성(活性)슬러지가 혼합액(混合液)의 분리(分離)가 종래(從來)의 중력침전법(重力沈澱法)으로는 어려운 경우에도 가압부상법(加壓浮上法)은 매우 좋은 효과(效果)를 나타낸다. 가압부상법(加壓浮上法)에는 한계(限界) 가압수량비(加壓水量比)가 존재(存在)하며 이 한계치(限界値)는 압력(壓力)에 따라 변화(變化)한다. 압력(壓力)은 단지 가압수량비(加壓水量比)에만 영향(影響)을 미치고 그 외(外)의 가압부상(加壓浮上) 효율(效率)에는 거의 영향(影響)이 없다. 연속식(連續式) 실험(實驗)이 회분식(回分式) 실험(實驗)보다 다소 효율(效率)이 떨어진다.

  • PDF

혼합 소화공정을 통한 하수 슬러지와 음폐수 병합 처리 (Simultaneous Treatment of Sewage Sludge and Food Wastewater Using Combined Digestion Process)

  • 하정협;박종문
    • 공업화학
    • /
    • 제28권5호
    • /
    • pp.581-586
    • /
    • 2017
  • 본 연구에서는 하수 슬러지 및 음폐수의 효율적인 병합처리를 위해 고온호기 전처리의 적용가능성을 알아보고자 고온호기-중온혐기 연계공정의 소화효율과 메탄가스 생성량에 미치는 영향을 비교 검증하였다. 또한, 유기물 부하량 증가에 따른 공정 내 변화 양상을 관찰하기 위해 실험실 규모의 고온호기-중온혐기 소화장치를 제작하여 음폐수를 증류수로 희석하는 비율을 1/3 (Run I), 2/3 (Run II) 및 원액(Run III)으로 줄여가며 혐기소화 공정 내 변화 양상을 관찰하였다. 실험 결과 별도의 pH 조절 없이 고온호기-중온혐기 연계공정 소화조 내에서 pH가 7~8으로 안정하게 유지됨을 알 수 있었다. Volatile solid (VS)는 순응 기간 후 고온호기-중온혐기 연계공정에서 52.24% (Run I), 66.59% (Run II) 및 72.53% (Run III)의 제거효율을 보이며, 중온혐기 소화조(R3)에 비교하여 높은 VS 제거율을 보였다. 또한, 고온호기-중온혐기(R1-R2) 연계공정에서 약 1.6배 향상된 메탄 생성률이 관찰되었으며, 메탄수율의 경우에도 고온호기-중온혐기(R1-R2) 연계공정에서 현저하게 높은 값을 유지하였다.

수용액 매체에서 젤-케스팅 공정을 이용한 세라믹 코어 제조에 관한 연구(II) : 세라믹 코어 소결체의 물성 (Study on the fabrication of Ceramic Core using a Gel-casting Process in Aqueous Medium(II) : Physical Properties of Sintered Ceramic Core Body)

  • 김재원;김두현;김인수;유영수;최백규;김의환;조창용
    • 한국재료학회지
    • /
    • 제11권6호
    • /
    • pp.465-471
    • /
    • 2001
  • 수용성 매체에서 젤-케스팅 공정을 이용하여 용융실리카를 기본으로 하는 다성분계 세라믹 코어 (中子)를 제조하고, 소결조건에 따른 제반 기계적 물성과 알칼리 부식용액에 의한 용출특성을 고찰하였다. 1000cP (at $50sec^{-1}$ ) 이하의 낮은 점도를 갖는 50vol%의 고농도 다성분계 세라믹 슬림의 제조가 가능하였다. 성형체는 안정화시킨 슬림을 몰드에 부어 상온에서 겔화시킨 후 $25^{\circ}C$, 80% 상대습도 분위기 하에서 48시간동안 건조시켜 제조하였으며 건조된 성형체에는 균열이 발생하지 않았다. 세라믹 코어 성형체의 소결온도가 상승할 수록 상온강도, 겉보기 밀도, 수축률은 시편의 기공도와 역비례하여 증가하였다. 세라믹 코어 소결체의 용출속도는 동일한 온도에서 알칼리 부식용액의 농도에 의존하였으며, 소결체의 기공도가 클수록 증가하였다.

  • PDF

농지-임야에서 발생하는 지표미생물 유출 특성 (Discharge Characteristics of Indicator Microorganisms from Agricultural-Forestry Watersheds)

  • 김건하
    • 대한토목학회논문집
    • /
    • 제28권1B호
    • /
    • pp.153-160
    • /
    • 2008
  • 농지-임야유역의 비점원으로부터 발생하는 미생물학적 오염물질 부하량을 추정하기 위하여, 농지와 임야가 혼합된 3개 시험유역에서 동일한 2개 강우사상에 대한 지표미생물 유출 특성을 조사하였으며, 지표미생물항목은 대장균군(total coliform: TC), 분원성 대장균(Fecal coliform: FC), 대장균 (Escherichia coli: EC), 분원성 연쇄상구균(Fecal streptococcus: FS)이었다. 농지-임야 유역의 강우시 유량변화에 따라 토사유실로 인하여 부유물질 농도가 상당히 증가하였다. 지표미생물 농도는 유량변화와 상당히 밀접한 관계를 보였다. 대부분 오염되지 않은 임야로 구성되어 있는 첫번째 유역의 강우유출수 TC EMC(Event Mean Concentration)는 $5.3{\times}10^3CFU/100ml$이었으며, FC EMC는$1.4{\times}10^3CFU/100ml$, EC EMC는 $1.1{\times}10^3CFU/100ml$, FS EMC는 $3.9{\times}10^2CFU/100ml$이었다. 임야유역과 농지유역이 혼합되어 있는 제 2 유역의 지표미생물에 대한 EMC는 TC EMC가 $1.7{\times}10^5CFU/100ml$, FC EMC가 $8.5{\times}10^4CFU/100ml$, EC EMC가 $8.9{\times}10^4CFU/100ml$, FS EMC가 $3.4{\times}10^4CFU/100ml$로 나타났다. 농지와 임야가 혼재되어 있으나, 유역면적이 큰 제 3 시험유역의 지표미생물에 대한 EMC는 TC EMC가 $1.9{\times}10^5CFU/100ml$, FC EMC가 $9.6{\times}10^4CFU/100ml$, EC EMC가 $7.0{\times}10^4CFU/100ml$, FS EMC가 $5.1{\times}10^4CFU/100ml$로 나타났다.

소화조(消化槽)의 수리학적(水理學的) 체류시간(滯留時間)이 분뇨(糞尿)와 정화조(淨化槽)슬러지 혼합물(混合物)의 혐기성소화(嫌氣性消化)에 미치는 영향(影響) (Effects of Hydraulic Rentention Time on Anaerobic Digestion of the Mixture of Nightsoil and Septic Tank Sludge)

  • 이광호;양상현
    • 대한토목학회논문집
    • /
    • 제3권3호
    • /
    • pp.117-127
    • /
    • 1983
  • 본(本) 연구(硏究)에서는 분뇨(糞尿)와 정화조(淨化槽)슬러지 혼합액(混合液)을 2단(段) 혐기성(嫌氣性) 소화방식(消化方式)으로 처리(處理)할 때 제(第)1소화조(消化槽)(반응조(反應槽))에서의 수리학적(水理學的) 체류시간(滯留時間)(5일(日), 15일(日), 25일(日))이 반응조(反應槽)내에서의 화학적(化學的) 특성(特性)과 처리도(處理度)에 미치는 영향(影響), 그리고 제(第)2소화조(消化槽)(침전조(沈澱槽))에서의 적정(適定) 체류시간(滯留時間)을 검토(檢討)하였으며 그 결과(結果)는 다음과 같다. 1) 휘발성(揮發性) 산(酸)(volatile-Acid)은 HRT의 증가(增加)에 따라 감소현상(減少現象)을 나타냈다. 2) HRT가 증가(增加)함에 따라 알카리도와, Ammonia-N은 증가(增加)하였으며 pH는 짧은 체류시간(滯留時間)에서는 증가추세(增加趨勢)를 보였으나 15일(日) 이상(以上)의 HRT에서는 거의 일정(一定)하였다. 3) TBOD, TCOD, TS, VS의 제거율(除去率)은 HRT의 증가(增加)에 따라서 증가(增加)하였다. 4) 휘발성고형물(揮發性固形物)(VS)의 제거율(除去率)은 부하량(負荷量)이 증가(增加)됨에 따라 감소현상(減少現象)을 나타냈다. 5) 주입된 VS 단위(單位)무게당(當) gas 생산량(生産量)은 HRT 5일(日)에서 $0.33m^3/kg$ VS fed/day, HRT 15일(日)에서 $0.58m^3/kg$ VS fed/day, HRT 25일(日)에서 $0.57m^3/kg$ VS fed/day로 HRT 15일(日) 부근에서 가장 높았다. 6) 슬러지고형물(固形物)의 침전(沈澱)이 완료(完了)되는데 요구(要求)되는 시간(時間)(tu)은 8.6 일(日)이었으며 육안(肉眼)으로 관찰(觀察)된 고형물(固形物)과 상등수(上燈水)의 경계면(境界面)이 최종단계(最終段階)에 이르는 시간(時間)은 약(約) 10일(日)이었다.

  • PDF

HADS Pilot Plant를 이용한 음폐수의 혐기성 소화 및 미생물 군집 변화 분석 (Anaerobic digestion for food wastewater using HADS Pilot Plant and analysis of microbial community in the digester)

  • 주동훈;이정민;박성범;성현제;배재상;상병인
    • 유기물자원화
    • /
    • 제18권2호
    • /
    • pp.76-83
    • /
    • 2010
  • 당사는 중온/습식/이상 혐기성 소화공정인 HADS Pilot Plant를 이용하여 국내 음폐수에 대해 유기물 부하(OLR, Organic Loading Rate) 증량 방식을 달리하여 혐기성 소화 테스트를 진행하였다. 그 방식은 연속적이면서 빠르게 OLR을 증량시키는 급속 OLR 증량 운전과 단계적이면서 각 단계별로 적응기를 갖는 계단식 OLR 증량 운전 방식이었다. 그 결과 급속 OLR 증량 운전시에는 불안정한 VFA(Volatile Fatty Acid)/Alkalinity 비율을 보이다가 바이오가스 발생량이 급감하는 결과를 보여주었다. 반면, 계단식 OLR 증량 운전시에는 VFA/Alkalinity의 비율을 0.4이하로 유지하면서 혐기성 소화 운전을 실시한 결과 안정적인 혐기성소화 성능을 보였을 뿐만 아니라, $0.8Nm^3/kgVS_{rem}/d$의 바이오가스 회수 및 85%의 VS(Volatile Solid) 감량이 가능함을 확인하였다. 그리고 OLR 증량 운전 방식에 따라 완전히 다른 결과가 도출되어 각각의 혐기성 소화 운전시의 박테리아 및 메탄생성균 군집의 변화를 T-RFLP(Terminal-Restriction Fragment Length Polymorphism)를 통하여 분석하였다. 그 결과, 급속 OLR 증량 운전시와 계단식 OLR 증량 운전시의 미생물 군집이 달라져 있음을 확인하였고, 이에 따라 동일한 혐기성 소화 공정을 적용하여 음폐수에 대한 혐기성 소화 운전을 진행하였음에도 OLR 증량 운전 방식에 따라 미생물의 반응성 및 주변환경에 대한 내성이 달라질 수 있음을 알 수 있었다.

Integrated Rotary Genetic Analysis Microsystem for Influenza A Virus Detection

  • Jung, Jae Hwan;Park, Byung Hyun;Choi, Seok Jin;Seo, Tae Seok
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.88-89
    • /
    • 2013
  • A variety of influenza A viruses from animal hosts are continuously prevalent throughout the world which cause human epidemics resulting millions of human infections and enormous industrial and economic damages. Thus, early diagnosis of such pathogen is of paramount importance for biomedical examination and public healthcare screening. To approach this issue, here we propose a fully integrated Rotary genetic analysis system, called Rotary Genetic Analyzer, for on-site detection of influenza A viruses with high speed. The Rotary Genetic Analyzer is made up of four parts including a disposable microchip, a servo motor for precise and high rate spinning of the chip, thermal blocks for temperature control, and a miniaturized optical fluorescence detector as shown Fig. 1. A thermal block made from duralumin is integrated with a film heater at the bottom and a resistance temperature detector (RTD) in the middle. For the efficient performance of RT-PCR, three thermal blocks are placed on the Rotary stage and the temperature of each block is corresponded to the thermal cycling, namely $95^{\circ}C$ (denature), $58^{\circ}C$ (annealing), and $72^{\circ}C$ (extension). Rotary RT-PCR was performed to amplify the target gene which was monitored by an optical fluorescent detector above the extension block. A disposable microdevice (10 cm diameter) consists of a solid-phase extraction based sample pretreatment unit, bead chamber, and 4 ${\mu}L$ of the PCR chamber as shown Fig. 2. The microchip is fabricated using a patterned polycarbonate (PC) sheet with 1 mm thickness and a PC film with 130 ${\mu}m$ thickness, which layers are thermally bonded at $138^{\circ}C$ using acetone vapour. Silicatreated microglass beads with 150~212 ${\mu}L$ diameter are introduced into the sample pretreatment chambers and held in place by weir structure for construction of solid-phase extraction system. Fig. 3 shows strobed images of sequential loading of three samples. Three samples were loaded into the reservoir simultaneously (Fig. 3A), then the influenza A H3N2 viral RNA sample was loaded at 5000 RPM for 10 sec (Fig. 3B). Washing buffer was followed at 5000 RPM for 5 min (Fig. 3C), and angular frequency was decreased to 100 RPM for siphon priming of PCR cocktail to the channel as shown in Figure 3D. Finally the PCR cocktail was loaded to the bead chamber at 2000 RPM for 10 sec, and then RPM was increased up to 5000 RPM for 1 min to obtain the as much as PCR cocktail containing the RNA template (Fig. 3E). In this system, the wastes from RNA samples and washing buffer were transported to the waste chamber, which is fully filled to the chamber with precise optimization. Then, the PCR cocktail was able to transport to the PCR chamber. Fig. 3F shows the final image of the sample pretreatment. PCR cocktail containing RNA template is successfully isolated from waste. To detect the influenza A H3N2 virus, the purified RNA with PCR cocktail in the PCR chamber was amplified by using performed the RNA capture on the proposed microdevice. The fluorescence images were described in Figure 4A at the 0, 40 cycles. The fluorescence signal (40 cycle) was drastically increased confirming the influenza A H3N2 virus. The real-time profiles were successfully obtained using the optical fluorescence detector as shown in Figure 4B. The Rotary PCR and off-chip PCR were compared with same amount of influenza A H3N2 virus. The Ct value of Rotary PCR was smaller than the off-chip PCR without contamination. The whole process of the sample pretreatment and RT-PCR could be accomplished in 30 min on the fully integrated Rotary Genetic Analyzer system. We have demonstrated a fully integrated and portable Rotary Genetic Analyzer for detection of the gene expression of influenza A virus, which has 'Sample-in-answer-out' capability including sample pretreatment, rotary amplification, and optical detection. Target gene amplification was real-time monitored using the integrated Rotary Genetic Analyzer system.

  • PDF

CE-QUAL-W2를 이용한 충주호의 기후변화에 따른 탁수 및 부영양화 영향평가 (Evaluation of Future Turbidity Water and Eutrophication in Chungju Lake by Climate Change Using CE-QUAL-W2)

  • 안소라;하림;윤성완;김성준
    • 한국수자원학회논문집
    • /
    • 제47권2호
    • /
    • pp.145-159
    • /
    • 2014
  • 본 연구에서는 충주댐을 대상으로 유역모델인 SWAT과 저수지모델인 CE-QUAL-W2를 연계 적용하여 기후변화에 따라 저수지로 유입되는 하천의 유량 및 탁수발생량을 모의하고, 저수지내의 탁수변화 및 부영양화 영향평가를 통한 저수지 수환경 변화를 전망하였다. 먼저 SWAT을 적용하여 강우시 저수지 유입하천의 유량 및 수질을 모의하여 모델의 재현성을 검토하였으며, 모형의 보정(2000~2005)과 검증(2006~2010) 결과 모델 예측값과 실측값이 적절하게 일치하는 것으로 나타났다. SWAT의 결과를 CE-QUAL-W2의 하천유량 및 유입수 수질경계조건 입력자료로 활용하고, 보정(2010년)과 검증(2008년)을 통하여 저수지 내 시간에 따른 물수지, 수온 변화, 부유물질(SS), T-N, T-P 및 부영양화(Chl-a) 양상 등을 분석하고 모델의 재현성을 검토하였다. 이후 기후변화 시나리오 적용에 따른 저수지 내수환경변화를 모의하기 위한 기후변화자료로 IPCC AR4 GCM(ECHO-G)을 고해상도지역 기후 시나리오로 개선시킨 RCM(MM5)의 A1B 시나리오를 다시 태풍사상을 고려한 인공신경망 기법에 의해 상세화하여 이용하였다. 기후변화 시나리오에 따른 기온증가의 영향으로 미래로 갈수록 상층수온은 증가하는 반면 심층수온은 감소하는 경향을 보였다. SS 최고유입농도는 평수년에 비해 풍수년에 17%, 갈수년에 0.2% 가량 증가하는 것으로 나타났다. 호소내 SS 10mg/L 이상 점유일수는 평수년에 비해 풍수년이 6일, 갈수년이 17일 증가하였고, 점유율 역시 풍수년에 24%, 갈수년에 26%가량 증가하는 것으로 분석되었다. 미래로 갈수록 기후변화가 충주댐 탁수장기화에 영향을 미치는 것으로 분석되었다. Chl-a의 최고농도는 평수년에 비해 풍수년에 19%, 갈수년에 3% 가량 조류의 농도가 증가되는 것으로 나타나 조류의 영향이 커지는 것을 알 수 있었다.