• 제목/요약/키워드: Solid Surface Antenna

검색결과 6건 처리시간 0.018초

패널오차에 의한 전개형 솔리드 안테나 성능 영향 (Effects on Performance of Deployable Solid Antenna for Panel Misalignment)

  • 이지용;이교일;윤성식;이택경;이재욱
    • 한국전자파학회논문지
    • /
    • 제28권8호
    • /
    • pp.603-609
    • /
    • 2017
  • 전개형 솔리드 안테나에서 패널 전개 시 발생할 수 있는 구조적인 오차가 안테나 성능에 미치는 영향을 분석하였다. 위성에서 활용되는 전개형 안테나는 지상에서 접힌 상태로 발사되어 우주 공간에서 펼쳐지며, 전개 시 발생할 수 있는 오차의 형태를 분류하여 각각의 경우에 성능에 미치는 영향을 분석하였다. 패널 하나에만 전개 오차가 있을 때는 불완전 전개 패널에 해당하는 쪽에서 안테나 성능의 열화가 발생하였다. 패널 전개 오차가 코사인 함수의 형태로 분포한다고 가정하여 오차의 크기와 오차 형태에 따른 영향을 계산하고 분석하였다. 안테나 패널 오차가 균일한 경우에는 오차크기에 비례하여 이득이 감소하고, 패턴은 대칭이다. 코사인 1 또는 3주기의 패널 오차에 대해서는 주엽의 기울어짐이 나타나며, 코사인 2 또는 4주기의 패널 오차에 대해서는 패턴은 대칭이며, 이득이 감소한다.

고체절연체표면의 오염상태에 따른 방전현상과 방사전자파의 주파수 특성 (The Frequency Characteristics of Electromagnetic Waves and Discharge Phenomena Caused by Polluted Condition of Solide Insulator Surface)

  • 김충년;박원주;이광식;이동인;김인식
    • 조명전기설비학회논문지
    • /
    • 제15권4호
    • /
    • pp.43-50
    • /
    • 2001
  • 본 논문은 구대구전극 사이에 고체절연체와 화염을 배치하여 방전시 절연체표면에서 발생되는 연면방전광과 화염의 변화를 CCD(Charged Coupled Device) 카메라로 관측하였으며, 방전시 발생되는 방사전자파는 스펙트럼 분석기와 바이코니칼 안테나를 이용하여 측정하였다. 인가전압 증가에 따른 고체절연체 표면에서 발생되는 연면 방전광은 커졌으며, 화염의 크기는 작아지는 것을 확인하였다. 또한 절연체표면 오염시와 화염시에는 전압강하에 의한 전압왜곡현상이 나타났다. 방사전자파의 전계세기는 절연체표면 무오염시에는 오염시보다 10∼17(dBuV/m), 절연체표면 오염시와 화염시에는 5∼9[dBuV/m]정도 높게 나타났다.

  • PDF

이온화된 소금물을 이용한 ASA 구조의 고 투명 평면형 다이폴 안테나 (High Transparent Planar Dipole Antenna using Ionized Salt-water of ASA Structure)

  • 판쥐뚱;정창원
    • 한국산학기술학회논문지
    • /
    • 제22권3호
    • /
    • pp.492-498
    • /
    • 2021
  • 본 논문에서는 액체 소금물을 전도체로써 이용한 평면형 투명 안테나의 구현 가능성을 연구 하였다. 소금물을 이용한 투명 안테나 구현의 가장 큰 이유는 기존 고체 투명전극의 광투과도 indium tin oxide (ITO:> 73%) 또는 multi-layer films (MLF: > 78%) 대비 높은 소금물의 광투과도 (> 95% @ 40 ppt)에 있다. 제안된 다이폴안테나의 양쪽 팔의 소금물 층을 평면형으로 고정하기 위해 투명 아크릴(��r = 2.61, tan�� = 0.01, OTav > 90 %)을 사용하였으며, 소금물의 표면장력을 이용하여 (ASA: 아크릴/소금물/아크릴) 형태의 평면형 ASA층으로 구현 하였다. 전기적, 광학적으로 ASA 전도체 구조를 분석하기 위해, 표면장력을 통한 평면형 구조 유지 시, 소금물 두께에 따른 면저항과 광투과도를 분석 하였다. 소금물을 이용한 투명 평면형 다이폴 안테나는 UHF(Ultra high frequency) 대역(470-771 MHz)에서 1.72 dBi의 평균 방사이득 및 74 %의 방사효율을 가지며, 향후 소금물을 이용한 평면형 투명안테나로써의 활용 가능성을 확인 하였다.

THE EFFECT OF SURFACE METEOROLOGICAL MEASUREMENTS ON PRECISION GPS HEIGHT DETERMINATION

  • Wang Chuan-Sheng;Liou Yuei-An;Wang Cheng-Gi
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
    • /
    • pp.178-181
    • /
    • 2005
  • The positioning accuracy of the Global Positioning System (GPS) has been improved considerably during the past two decades. The main error sources such as ionospheric refraction, orbital uncertainty, antenna phase center variation, signal multipath, and tropospheric delay have been reduced substantially, if not eliminated. In this study, the GPS data collected by the GPS receivers that were established as continuously operating reference stations by International GNSS Service (IGS), Ministry of the Interior (MOl), Central Weather Bureau (CWB), and Industrial Technology Research Institute (ITRI) Of Taiwan are utilized to investigate the impact of atmospheric water vapor on GPS positioning determination. The surface meteorological measurements that were concurrently acquired by instruments co-located with the GPS receivers include temperature, pressure and humidity data. To obtain the influence of the GPS height on the proposed impact study. A hydrodynamic ocean tide model (GOTOO.2 model) and solid earth tide were used to improve the GPS height. The surface meteorological data (pressure, temperature and humidity) were introduced to the data processing with 24 troposphere parameters. The results from the studies associated with different GPS height were compared for the cases with and without a priori knowledge of surface meteorological measurements. The finding based on the measurements in 2003 is that the surface meteorological measurements have an impact on the GPS height. The associated daily maximum of the differences is 1.07 cm for the KDNM station. The impact is reduced due to smoothing when the average of the GPS height for the whole year is considered.

  • PDF

안테나를 이용한 VHF대역에서 고체절연체의 연면방전에 기인한 방사전자파의 측정 (The Measurement of Electromagnetic Waves caused by Surface Discharges of Solide Insulator at VHF Band Using an Antenna)

  • 김충년;박광서;김기채;이광식;이동인
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.219-223
    • /
    • 2001
  • In this paper, electromagnetic waves were measured in accordance with propagating the discharge when positive and negative DC high voltage was applied to needle-plane electrdes and plane-plane electrdes that solid dielectric was inserted between the electrodes. The radiated electromagnetic waves were investigated in bandwidth of VHF($30{\sim}230$[MHz]) using an biconical antenna. In needle-plane electrodes high electric field intensity is shown in both frequency band of 90(MHz) and 170[MHz], and gradually decreasing characteric is appeared at high frequency band. However high electric field intensity is shown in both 80[MHz] and 140[MHz] in case of plane-plane electrodes configuration. And over 150[MHz] frequency band, rapidly decreasing characteristic is shown. Moreover, electric field intensity of positive DC is about $5{\sim}10$[dB] higher than negative DC.

  • PDF

친환경 가스 중 전극과 고체절연체의 불량접촉에 관한 절연진단연구 (Study on Insulation Diagnosis of Poor Contact between Electrode and Solid Insulator in Eco-Gas)

  • 임동영;최은혁;배성우;최상태;이광식;최병주
    • 조명전기설비학회논문지
    • /
    • 제29권10호
    • /
    • pp.97-103
    • /
    • 2015
  • This paper presents the characteristics of partial discharge and radiated electromagnetic waves in the existence of a poor contact for the insulation diagnosis of eco-friendly power equipment. AC surface discharge experiment was conducted to simulate the poor contact between a hive voltage electrode (anode) and a solid insulator in $N_2/O_2$ mixture gas under a non-uniform field. The partial discharge voltage to be measured at 0.3MPa increased with the increase of the poor contact gap and was saturated with the gap. In addition to the partial discharge characteristics, it was verified that the defect of the poor contact can be diagnosed using the radiated electromagnetic waves due to the partial discharge, which measured by a biconical EMC antenna and a spectrum analyzer.