• Environmental Engineering Research
• /
• 제22권3호
• /
• pp.231-236
• /
• 2017

Solid waste disposal and management is a critical problem in Nigeria. Annually, a huge quantity of municipal solid waste is generated in Aba. Municipal solid waste disposal in Aba poses severe challenge to environmental safety, public health and welfare of citizens. The situation is made worse by the indiscriminate dumping of refuse at roadsides, streets, waterways and empty lands. The impact of this waste management practice in Aba is environmental deterioration. Efforts to improve waste management in Aba have not recorded significant success. This paper therefore aims to highlight the challenges facing the waste management sector in Aba and proffer solutions on how to improve the sector.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2355-2361
• /
• 2009

The current solid polymer electrolytes suffer from poor conductivity, low mechanical and electrochemical stability toward the lithium electrodes. To improve the performance of solid polymer electrolytes, the addition of nanoparticle fillers to the polymer electrolyte is being extensively investigated. In this paper, a brief review on the state of art of solid fillers for lithium battery electrolytes is presented.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.515-516
• /
• 2007

• 한국자기공명학회:학술대회논문집
• /
• 한국자기공명학회 2002년도 International Symposium on Magnetic Resonance
• /
• pp.20-20
• /
• 2002

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1289-1290
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2493-2494
• /
• 2007

• 한국주조공학회지
• /
• 제37권5호
• /
• pp.157-163
• /
• 2017

In the present study, the microstructural evolution and deformation behavior of AA 2014 aluminum alloys with different microstructures in a semi-solid state were investigated. For a given alloy, applied load and deformation time, the measured strain was higher at a higher temperature, indicative of a lower solid fraction. When a large proportion of the liquid was present as intragranular droplets, the alloy would not as easily deform because the effective liquid fraction between the solid grains had decreased. Greater deformation was achieved with higher grain boundary misorientations due to the enhanced wetting of the grain boundaries with liquid. A semi-empirical constitutive model is proposed for semi-solid deformation under the conditions in the present study. The mechanism of semi-solid deformation incorporates the initial flow of the liquid in the early stages of deformation, followed by a more gradual increase in the strain due to deformation by grain sliding accompanied by self-diffusion in the solid grains.

• ETRI Journal
• /
• 제42권1호
• /
• pp.129-137
• /
• 2020

All-solid-state batteries are promising energy storage devices in which high-energy-density and superior safety can be obtained by efficient cell design and the use of nonflammable solid electrolytes, respectively. This paper presents a systematic study of experimental factors that affect the electrochemical performance of all-solid-state batteries. The morphological changes in composite electrodes fabricated using different mixing speeds are carefully observed, and the corresponding electrochemical performances are evaluated in symmetric cell and half-cell configurations. We also investigate the effect of the composite electrode thickness at different charge/discharge rates for the realization of all-solid-state batteries with high-energy-density. The results of this investigation confirm a consistent relationship between the cell capacity and the ionic resistance within the composite electrodes. Finally, a concentration-gradient composite electrode design is presented for enhanced power density in thick composite electrodes; it provides a promising route to improving the cell performance simply by composite electrode design.

• Journal of Microbiology and Biotechnology
• /
• 제19권5호
• /
• pp.468-473
• /
• 2009

The antibiotic meroparamycin was produced in the free culture system of Streptomyces sp. strain MAR01. Five solid substrates (rice, wheat bran, Quaker, bread, and ground corn) were screened for their ability to support meroparamycin production in solid-state fermentation. In batch culture, wheat bran recorded the highest antibacterial activity with the lowest residual substrate values. The highest residual substrate values were recorded for both ground corn and Quaker. On the other hand, no antibacterial activity was detected for rice as a solid substrate. The use of the original strength of starch-nitrate medium in the solid-state fermentation gave a lower antibacterial activity compared with the free culture system. Doubling the strength of this medium resulted in the increase in the activity to be equivalent to the free culture. The initial pH (7.0) of the culture medium and 2 ml of spore suspension (1 ml contains $5{\times}10^{9}spores/ml$) were the optima for antibiotic production. The water was the best eluent for the extraction of the antibiotic from the solid-state culture. Ten min was enough time to extract the antibiotic using a mixer, whereas, 60 min was required when shaking was applied. Semicontinuous production of meroparamycin using a percolation method demonstrated a more or less constant antibacterial activity over 4 runs ($450-480{\mu}g/ml$). The semicontinuous production of the antibiotic was monitored in a fixed-bed bioreactor and the maximum activity was attained after the fourth run ($510{\mu}g/ml$) and the overall process continued for 85 days.

• 한국미생물·생명공학회지
• /
• 제27권4호
• /
• pp.311-319
• /
• 1999

Leaves of Aloe vera Linne and bloods of domestic animal were composted in a soild state fermentation reactor (SSFR) by using microbial additive including a bulking and moisture controlling agent. From solid-culture of microbial additive, 10 species of bacteria and 10 species of fungi were isolated and, their enzyme activities including amylase, carboxy methyl cellulase CMCase, lipase and protease were detected. Optimum fermentation conditions of Aloe leaves and domestic animal bloods in SSFR were obtained from the studies of response surface analysis employing microbial additive content, initial moisture content, and fermentation temperature as the independent variables. The optimum conditions for SSFR using Aloe leaves were obtained at 9.45$\pm$73%(w/w) of microbial additives, 62.73$\pm$4.54%(w/w) of initial moisture content and 55.32$\pm$3.14$^{\circ}C$ of fermentation temperature while those for SSFR using domestic animal bloods were obtained at 10.25$\pm$2.04%, 58.68$\pm$4.97% and 57.85$\pm$5.$65^{\circ}C$, respectively. Composting process in SSFR was initially proceeded through fermentation and solid materials were decomposed within 24 hours by maintaining higher moisture level, and maturing and drying steps are followed later. After the fermentation step, the concentrations of solid phase inorganic components were increased while that of organic components were decreased. Also, concentrations of total organic carbon(TOC), peptides, amino acids, polysaccharides, and low fatty acids in water extracts were increased. As fermentation in composting process depends on initial C/N ratios in water extracts of two samples were increased because of increased water-soluble TOC. From these results, it was revealed that solid state fermentation reactor using microbial additives can be used in composting process of organic wastes with broad C/N ratio.