• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2070-2075
• /
• 2004

Performance of a solid oxide fuel cell (SOFC) can be enhanced by converting thermal energy of its high temperature exhaust gas to mechanical power using a micro gas turbine (MGT). A MGT plays also an important role to pressurize and warm up inlet gas streams of the SOFC. In this study, the influence of performance characteristics of the tubular SOFC on the hybrid power system is discussed. For this purpose, detailed heat and mass transfer with reforming and electrochemical reactions in the SOFC are mathematically modeled, and their results are reflected to the performance analysis. The analysis target is 220kWe SOFC/MGT hybrid system based on the tubular SOFC developed by Siemens-Westinghouse. Special attention is paid to the ohmic losses in the tubular SOFC counting not only current flow in radial direction, but also current flow in circumferential direction through the anode and cathode.

• 전기화학회지
• /
• 제9권4호
• /
• pp.151-157
• /
• 2006

A two-dimensional numerical model to study the performance of anode-supported flat-tube solid oxide fuel cell (SOFC) far the cross section of the cell in the flow direction of the fuel and air flows is developed. In this model a mass and charge balance, Maxwell-Stefan equation as well as the momentum equation by using, Darcy's law are applied in differential form. The finite element method using FEMLAB commercial software is used for meshing, discritization and solving the system of coupled differential equations. The current density distribution and fuel consumption as well as water production are analyzed. Experimental data is used to verify a predicted voltage-current density and power density versus current density to judge on the model accuracy.

• 한국수소및신에너지학회논문집
• /
• 제24권6호
• /
• pp.467-471
• /
• 2013

In present work, optimized the manufacturing process of anode-supported tubular SOFCs cell and stack were studied. For this purpose, we first developed a high performance tubular SOFC cell, and then made electrical connection in series to get high voltage. The gas sealing was established by attaching single cells to alumina jig with ceramic bond. Through these process, we can obtain such high OVP as around 15V, which means that the electrical connection and gas sealing were optimized. Finally we developed a new tubular SOFC stack which shows a maximum power of 65W @ $800^{\circ}C$.

• 한국위성정보통신학회논문지
• /
• 제11권3호
• /
• pp.24-27
• /
• 2016

본 연구에서는 연료전지 중 발전효율이 50% 이상으로 가장 높고 가정용(1~10kW급) 시스템으로 필요성이 높아지고 있는 고체산화물 연료전지(SOFC, Solid Oxide Fuel Cell)에 대한 평가시스템을 설계하여 최적의 평가성능을 구현코자 하였다. 최적의 연료전지 평가시스템을 구현하기 위하여 전처리 및 반응조건 제어를 위한 온도제어모듈, 반응물에 대한 유량제어모듈, 전자부하기 등을 구현하였다. 온도제어모듈은 K형 서머커플을 사용하여 운전온도인 $750^{\circ}C$에서 $1^{\circ}C$이내의 정밀도 구현이 가능토록 설계하였고, 가스의 양이 일정하게 유지하기 위한 가습기 구조를 설계하였으며, 송풍기 및 히터의 정밀제어가 가능하도록 위상제어보드를 설계하여 적용함으로서 목표성능을 구현하였으며, 전자부하기는 방전방식으로 정전압, 정전류, 정저항 모드와 아날로그 입력과 출력모듈에 별도의 DC-DC 컨버터를 사용하여 오류를 최소화하였다. 구현한 평가시스템의 성능을 측정한 결과 스택전압은 80V에서 0.15%, 스택전류는 100A에서 0.1%의 정밀제어가 가능함을 확인하였다.

• 한국세라믹학회지
• /
• 제37권9호
• /
• pp.847-855
• /
• 2000

80$0^{\circ}C$에서 작동하는 중온형 SOFC(Solid Oxide Fuel Cell) 단전지의 제조공정을 확립하고 그 출력특성을 평가하였다. 중온형 SOFC에서 문제가 되는 전해질 성분에 의한 출력 감소를 최소화하기 위해 음극기판 위에 7-15$\mu\textrm{m}$ 두께의 얇은 YSZ막을 입히는 음극지지형 SOFC를 구성하였다. 산화, 환원 반응이 일어나는 전극에서는 전극반응에 필요한 유효면적을 최대화하여 분극 저항을 줄일 수 있도록 음극으로는 Ni-YSZ 복합체를, 양극으로는 LSM-YSZ 복합체를 사용하였다. 출력특성 평가를 위한 단전지 홀더는 Inconnel을 가공하여 사용하였으며 80$0^{\circ}C$에서 최적의 밀봉효과를 나타낼 유리밀봉재를 개발하여 사용하였다. 제조한 단전지의 단면적은 5$\times$5$\textrm{cm}^2$, 10$\times$10$\textrm{cm}^2$ 두 종류였으며 운전 시험결과 5$\times$5 단전지의 경우는 최고 0.2W/$\textrm{cm}^2$, 10$\times$10 단전지의 경우는 0.12W/$\textrm{cm}^2$ 정도의 출력밀도를 나타내었다. 단전지의 출력 및 장기 안정성은 전극구조의 변화 및 단전지 홀더의 산화에 따른 접촉 저항 변화에 크게 영향을 받는 것으로 나타났으며 운전중의 연료공급 및 작동온도 변화 등에 의한 영향도 큰 것으로 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3224-3229
• /
• 2007

This study aims to analyse the influence of steam injection on the performance of hybrid systems combining a solid oxide fuel cell and a gas turbine. The steam is generated by recovering heat from the exhaust gas. Two system configurations, with difference being the operating pressure of the SOFC, are examined and effects of steam injection on performances of the two systems are compared. Two representative gas turbine pressure ratios are simulated and a wide range of both the fuel cell temperature and the turbine inlet temperature is examined. Without steam injection, the pressurized system generally exhibits better system efficiency than the ambient pressure system. Steam injection increases system power capacity for all design cases. However, its effect on system efficiency varies much depending on design conditions. The pressurized system hardly takes advantage of the steam injection in terms of the system efficiency. On the other hand, steam injection contributes to the efficiency improvement of the ambient pressure system in some design conditions. A higher pressure ratio provides a better chance of efficiency increase due to steam injection.

• 한국가시화정보학회지
• /
• 제19권2호
• /
• pp.56-62
• /
• 2021

Solid oxide fuel cells (SOFCs) is the high efficiency fuel cell operating at high temperatures ranging from 700-1000℃. Design of the flow paths of the fuel and air in SOFCs is important to improve cell performance and prevent cell degradation. However, the uneven distribution of current density in the traditional type having one inlet and outlet causes cell degradation. In this regard, the parallel flow path with two inlet and outlets was designed and compared to the traditional type based on computational fluid dynamics (CFD) simulation. To check the cell performance, hydrogen distribution, velocity distribution and current density distribution were monitored. The results validated that the parallel designs with two inlets and outlets have a higher cell performance compared to the traditional design with one inlet and outlet due to a larger reaction area. In case of uniform-type paths, more uniform current density distribution was observed with less cross-sectional variation in flow paths. In case of contracted and expanded inflow paths, significant improvement of performance and uniform current density was not observed compared to uniform parallel path. Considering SOFC cell with uniform current density can prevent cell degradation, more suitable design of SOFC cell with less cross-sectional variation in the flow path should be developed. This work can be helpful to understand the role of flow distribution in the SOFC performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1250-1251
• /
• 1997

Among the fuel cell system, solid oxide fuel cell is constructed of ceramics, so stack construction is simple, power density is very high, and there is no corrosion problem. The purpose of this research is to investigate the characteristics of state of art for SOFC.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.49-62
• /
• 2016

In this study, a solid oxide fuel cell (SOFC) system model including balance of plant (BOP) for building electric power generation is developed to study the effect of operating conditions on the system efficiency and power output. SOFC system modeled in this study consists of three heat-exchangers, an external reformer, burner, and two blowers. A detailed computational cell model including internal reforming reaction is developed for a planer SOFC stack which is operated at intermediate temperature (IT). The BOP models including an external reformer, heat-exchangers, a burner, blowers, pipes are developed to predict the gas temperature, pressure drops and flow rate at every component in the system. The SOFC stack model and BOP models are integrate to estimate the effect of operating parameters on the performance of the system. In this study, the design of experiment (DOE) is used to compare the effects of fuel flow rate, air flow rate, air temperature, current density, and recycle ratio of anode off gas on the system efficiency and power output.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권2호
• /
• pp.233-243
• /
• 2009

The strengthened regulations for atmospheric emissions from ships like MARPOL Annex VI have caused a necessity of new, alternative power system in ships for the low pollutant emissions and the high energy efficiency. This paper attempts to investigate the configuration of SOFC system for LNG tanker taking into account the safety and to analyze the influence of design parameters on the system performance. The simulation results provide the basic data for the design and efficiency improvement of SOFC system and indicate the guidelines for the safe system operation.