• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2000년도 추계학술발표강연 및 논문개요집
• /
• pp.54-54
• /
• 2000

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2001년도 추계학술발표대회 개요집
• /
• pp.156-158
• /
• 2001

• ETRI Journal
• /
• 제37권2호
• /
• pp.387-394
• /
• 2015

A novel interconnection technology based on a 52InSn solder was developed for flexible display applications. The display industry is currently trying to develop a flexible display, and one of the crucial technologies for the implementation of a flexible display is to reduce the bonding process temperature to less than $150^{\circ}C$. InSn solder interconnection technology is proposed herein to reduce the electrical contact resistance and concurrently achieve a process temperature of less than $150^{\circ}C$. A solder bump maker (SBM) and fluxing underfill were developed for these purposes. SBM is a novel bumping material, and it is a mixture of a resin system and InSn solder powder. A maskless screen printing process was also developed using an SBM to reduce the cost of the bumping process. Fluxing underfill plays the role of a flux and an underfill concurrently to simplify the bonding process compared to a conventional flip-chip bonding using a capillary underfill material. Using an SBM and fluxing underfill, a $20{\mu}m$ pitch InSn solder SoP array on a glass substrate was successfully formed using a maskless screen printing process, and two glass substrates were bonded at $130^{\circ}C$.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.85-91
• /
• 2002

Even though electroless Hi and Sn-Ag-Cu solder are widely used materials in electronic packaging applications, interfacial reactions of the ternary Ni-Cu~Sn system have not been known well because of their complexity. Because the growth of intermetallics at the interface affects reliability of solder joint, the intermetallics in Ni-Cu-Sn system should be identified, and their growth should be investigated. Therefore, in present study, interfacial reactions between electroless Ni UB7f and 95.5Sn-4.0Ag-0.5Cu alloy were investigated focusing on morphology of the IMCs, thermodynamics, and growth kinetics. The IMCs that appear during a reflow and an aging are different each other. In early stage of a reflow, ternary IMC whose composition is Ni$_{22}$Cu$_{29}$Sn$_{49}$ forms firstly. Due to the lack of Cu diffusion, Ni$_{34}$Cu$_{6}$Sn$_{60}$ phase begins growing in a further reflow. Finally, the Ni$_{22}$Cu$_{29}$Sn$_{49}$ IMC grows abnormally and spalls into the molten solder. The transition of the IMCs from Ni$_{22}$Cu$_{29}$Sn$_{49}$ to Ni$_{34}$Cu$_{6}$Sn$_{60}$ was observed at a specific temperature. From the measurement of activation energy of each IMC, growth kinetics was discussed. In contrast to the reflow, three kinds of IMCs (Ni$_{22}$Cu$_{29}$Sn$_{49}$, Ni$_{20}$Cu$_{28}$Au$_{5}$, and Ni$_{34}$Cu$_{6}$Sn$_{60}$) were observed in order during an aging. All of the IMCs were well attached on UBM. Au in the quaternary IMC, which originates from immersion Au plating, prevents abnormal growth and separation of the IMC. Growth of each IMC is very dependent to the aging temperature because of its high activation energy. Besides the IMCs at the interface, plate-like Ag3Sn IMC grows as solder bump size inside solder bump. The abnormally grown Ni$_{22}$Cu$_{29}$Sn$_{49}$ and Ag$_3$Sn IMCs can be origins of brittle failure.failure.

• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.21-28
• /
• 2004

Polytetrafluoroethylene (PTFE/Teflon ) 인쇄회로기판용 미세 피치 솔더 범프 형성을 위해 dry film photoresist (DFR)를 photolithography 공정에 적용하였다. DFR lamination을 위한 test board는 폭 100$\mu\textrm{m}$와 두께 18$\mu\textrm{m}$의 copper line들이 100-200$\mu\textrm{m}$의 간격으로 배열된 형태로 디자인하였다. 15$\mu\textrm{m}$의 두께를 갖는 DFR을 hot roll laminator를 사용하여 lamination 온도와 속도를 변화시켜가면서 lamination 공정 실험을 수행하였다. 실험 결과, PTFE 인쇄회로기판에 DFR을 lamination하는 공정의 최적 조건은 lamination 온도 $150^{\circ}C$, 속도 약 0.63cm/s였다. UV exposure 및 development 공정을 거쳐 저융점 솔더 재료인 인듐을 증착하였다. DFR 박리 순서에 따른 두 가지 다른 reflow 공정을 통해 최소 지름 50$\mu\textrm{m}$, 최소 피치 100$\mu\textrm{m}$를 갖는 인듐 솔더 범프를 형성하였다.

• 마이크로전자및패키징학회지
• /
• 제17권3호
• /
• pp.65-69
• /
• 2010

In this study, we investigated the effects of UBM(Under Bump Metallization) and solder composition on the drop impact reliability of wafer level packaging. Fan-in type WLP chips were prepared with different solder ball composition (Sn3.0Ag0.5Cu, and Sn1.0Ag0.5Cu) and UBM (Cu 10 ${\mu}m$, Cu 5 ${\mu}m$\Ni 3 ${\mu}m$). Drop test was performed up to 200 cycles with 1500G acceleration according to JESD22-B111. Cu\Ni UBM showed better drop performance than Cu UBM, which could be attributed to suppression of IMC formation by Ni diffusion barrier. SAC105 was slightly better than SAC305 in terms of MTTF. Drop failure occurred at board side for Cu UBM and chip side for Cu\Ni UBM, independent of solder composition. Corner and center chip position on the board were found to have the shortest drop lifetime due to stress waves generated from impact.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.366-369
• /
• 2003

The vertical fountain plating system with the point contact has been used in semiconductor industry. But the plating shape in the opening of photoresist becomes gradated shape, because bubbles from the wafer surface are difficult to escape from the deep openings, vias. So, we designed the tilted electrode ring contact to get uniform bump height on all over the wafer and evaluated the film uniformity by SEM and $\alpha$-step. A photoresist was coated to a thickness of $60{\mu}m$ and vias were patterned by a contact aligner After via opening, solder layer was electroplated using the fountain plating system and the tilted electrode ring contact system. In $\alpha$-step measurement, film uniformities in the fountain plating system and the tilted electrode ring contact system were ${\pm}16%,\;{\pm}3.7%$ respectively. In this study, we could get high uniformity bumps by the tilted electrode ring contact system. So, tilted electrode ring contact system is expected to improve workability and yield in module process.

• ETRI Journal
• /
• 제37권3호
• /
• pp.523-532
• /
• 2015

Recently, we have witnessed the gradual miniaturization of electronic devices. In miniaturized devices, flip-chip bonding has become a necessity over other bonding methods. For the electrical connections in miniaturized devices, fine-pitch solder bumping has been widely studied. In this study, high-volume solder-on-pad (HV-SoP) technology was developed using a novel maskless printing method. For the new SoP process, we used a special material called a solder bump maker (SBM). Using an SBM, which consists of resin and solder powder, uniform bumps can easily be made without a mask. To optimize the height of solder bumps, various conditions such as the mask design, oxygen concentration, and processing method are controlled. In this study, a double printing method, which is a modification of a general single printing method, is suggested. The average, maximum, and minimum obtained heights of solder bumps are $28.3{\mu}m$, $31.7{\mu}m$, and $26.3{\mu}m$, respectively. It is expected that the HV-SoP process will reduce the costs for solder bumping and will be used for electrical interconnections in fine-pitch flip-chip bonding.

• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.77-85
• /
• 2004

플라즈마 리플로우 솔더링에서 솔더볼의 접합성을 향상시키기 위해 UBM(Under Bump Metallization)을 Ar-10vol%$H_2$플라즈마로 클리닝하는 방법을 연구하였다. UBM층은 Si 웨이퍼 위에 Au(두께; 20 nm)/ Cu(4 $\mu\textrm{m}$)/ Ni(4 $\mu\textrm{m}$)/ Al(0.4 $\mu\textrm{m}$)을 웨이퍼 측으로 차례대로 증착하였다. 무연 솔더로는Sn-3.5wt%Ag, Sn-3.5wt%Ag-0.7wt%Cu를 사용하였고 Sn-37wt%Pb를 비교 솔더로 사용하였다. 지름이500 $\mu\textrm{m}$인 솔더 볼을 플라즈마 클리닝 처리를 한 UBM과 처리하지 않은 UBM위에 놓고, Ar-10%$H_2$플라즈마 분위기에서 플럭스 리스 솔더링하였다. 이 결과는 플럭스를 사용하여 대기 중에서 열풍 리플로우한 결과와 비교하였다. 실험 결과, 플라즈마 클리닝 후 플라즈마 리플로우한 솔더의 퍼짐율이 클리닝 하지 않은 플라즈마 솔더링보다 20-40%정도 더 높았다. 플라즈마 클리닝 후 플라즈마 리플로우한 솔더 볼의 전단 강도는 약58-65MPa로, 플라즈마 클리닝 하지 않은 플라즈마 리플로우보다 60-80%정도 높았으며, 플럭스를 사용한 열풍 리플로우보다는 15-35%정도 높았다. 따라서 Ar-10%$H_2$가스를 사용하여 UBM에 플라즈마 클리닝하는 공정은 플라즈마 리플로우 솔더 볼의 접합강도를 향상시키는데 상당한 효과가 있는 것으로 확인되었다.

• 한국재료학회지
• /
• 제10권12호
• /
• pp.799-806
• /
• 2000

63Sn-37Pb에 Cu$_{6}$Sn$_{5}$를 분산시킨 760$\mu\textrm{m}$크기의 솔더범프를 Au(0.5$\mu\textrm{m}$)/Ni(5$\mu\textrm{m}$)/Cu(27$\pm$20$\mu\textrm{m}$) BGA 기판에 스크린)/Ni(5im)/Cu(27:201m) B3GA 기판에 스크린 프린팅법으로 제조하여, 리플로우 피크온도 유지시간, 15$0^{\circ}C$ 시효처리 시간에 따른 전단강도를 분석하였다. Cu$_{6}$Sn$_{5}$를 첨가한 솔더범프는 피크온도에서 30초간 유지시에는 63Sn-37Pb 솔더범프보다 높은 전단강도를 나타내었으나, 피크온도 유지시간을 60초 이상으로 증가시킴에 따라 전단강도가 63Sn-37Pb 솔더범프보다 저하하였다. 전단시험 후 솔더범프의 파단면은 초기에 전단 균열의 점진적인 전파에 의해 발생된 파괴부위와 점진적 균열전파에 의한 면적 감소로 솔더범프가 급격히 떨어져 나가면서 발생한 파괴부위로 구분할 수 있었다 피크온도 유지시간, 15$0^{\circ}C$ 시효처리 시간 및 Cu$_{6}$Sn$_{5}$ 첨가량에 무관하게 점진적 파괴모드에 의한 균열 전파길이가 증가할수록 솔더범프의 전단강도가 감소하였다.감소하였다.