• 한국태양에너지학회 논문집
• /
• 제36권2호
• /
• pp.31-39
• /
• 2016

This study did quantitative comparative evaluation of changes in generation consequent on reflectivity of the protruding wall near the widow in case of application of PV window system to an apartment house. To be concrete, this study did comparative analysis of the generation of (B) through the process of composing Mock-up (A)comprising the protruding window near the window and Mock-up(B) free of nearby wall interference, and giving change to the reflectivity of the wall (Case_1~3). The analysis result showed that the difference in generation was slight in case solar radiation was less than 10,000Wh in all three conditions. On the contrary, in case solar radiation was more than 10,000 Wh, the generation as against Module(B), was analyzed to be 87~91% in Case_1(5% reflectivity), 18~60% in Case_2(85% reflectivity), and 16~71% in case_3(93% reflectivity), respectively.

• Computers and Concrete
• /
• 제20권5호
• /
• pp.605-616
• /
• 2017

Concrete filled steel tubular (CFST) composite girder is a new type of structures for bridge constructions. The existing design codes cannot be used to predict the thermal stress in the CFST truss girder structures under solar radiation. This study is to develop the temperature gradient curves for predicting thermal stress of the structure based on field and laboratory monitoring data. An in-field testing had been carried out on Ganhaizi Bridge for over two months. Thermal couples were installed at the cross section of the CFST truss girder and the continuous data was collected every 30 minutes. A typical temperature gradient mode was then extracted by comparing temperature distributions at different times. To further verify the temperature gradient mode and investigate the evolution of temperature fields, an outdoor experiment was conducted on a 1:8 scale bridge model, which was installed with both thermal couples and strain gauges. The main factors including solar radiation and ambient temperature on the different positions were studied. Laboratory results were consistent with that from the in-field data and temperature gradient curves were obtained from the in-field and laboratory data. The relationship between the strain difference at top and bottom surfaces of the concrete deck and its corresponding temperature change was also obtained and a method based on curve fitting was proposed to predict the thermal strain under elevated temperature. The thermal stress model for CFST composite girder was derived. By the proposed model, the thermal stress was obtained from the temperature gradient curves. The results using the proposed model were agreed well with that by finite element modelling.

• 대한화장품학회지
• /
• 제17권1호
• /
• pp.1-17
• /
• 1991

Multiport-600 Solar SimulatorR is one of the most recent and convenient in-strument for evaluation of sun protection factor(SPF). In this study, we examined the practicability of the SPF determining system using Multiport -600 and the effects of several factors-light sources, seasons and experimental animals-on the minimal erythema dose(MED) and SPF. We also tested the UV sensitivity according to the sites of Korean people, And the ultraviolet radiation reaching the earth's surface In Seoul have been observed for one year. As a result of this study, the determinig system for SPF using Multiport-600 was proved to be a good system in accuracy and time-saving. The biological activity of fluorescence UV lamp of PUVA-800R was significantly higher than natural light or solar simulator with Xe arc lamp, and the determined MED became lower in inverse proportion to room temperature rise. Skin sensitivity by ultraviolet adiation was hights. in order \circled1 back \circled2 inns, upper arm \circled3 outer upper arm \circled4 foream. We also observed that UV radiation intensity was highest at noon in july and 1 sun burn unit(MED) was 28 minutes at that time.

• 한국전자통신학회논문지
• /
• 제3권4호
• /
• pp.221-227
• /
• 2008

소방 방재청에서 실시하여 온 시범사업 및 확장 1차 사업을 통하여 구축된 시스템은 국산화율이 매우 낮은 상황으로서 시스템제조업자의 제조 중단 등이 발생할 경우 통합망의 유지관리에 상당한 지장을 초래하게 된다. 이 문제를 방지하기 위해서는 단말기는 물론이고 중앙시스템에 대한 주요 부품의 국산화가 요구된다. 즉 통합네트워크 시스템의 기술종속 방지 및 국산화 대책 마련이 필요한 상태이다. 본고는 기술종속 및 독점 요소 분석을 통한 국산화방안에 대한 정책방향을 제시한다.

• Safety and Health at Work
• /
• 제8권3호
• /
• pp.237-245
• /
• 2017

Background: Solar furnaces are used worldwide to conduct experiments to demonstrate the feasibility of solar-chemical processes with the aid of concentrated sunlight, or to qualify high temperature-resistant components. In recent years, high-flux solar simulators (HFSSs) based on short-arc xenon lamps are more frequently used. The emitted spectrum is very similar to natural sunlight but with dangerous portions of ultraviolet light as well. Due to special benefits of solar simulators the increase of construction activity for HFSS can be observed worldwide. Hence, it is quite important to protect employees against serious injuries caused by ultraviolet radiation (UVR) in a range of 100 nm to 400 nm. Methods: The UV measurements were made at the German Aerospace Center (DLR), Cologne and Paul-Scherrer-Institute (PSI), Switzerland, during normal operations of the HFSS, with a high-precision UV-A/B radiometer using different experiment setups at different power levels. Thus, the measurement results represent UV emissions which are typical when operating a HFSS. Therefore, the biological effects on people exposed to UVR was investigated systematically to identify the existing hazard potential. Results: It should be noted that the permissible workplace exposure limits for UV emissions significantly exceeded after a few seconds. One critical value was strongly exceeded by a factor of 770. Conclusion: The prevention of emissions must first and foremost be carried out by structural measures. Furthermore, unambiguous protocols have to be defined and compliance must be monitored. For short-term activities in the hazard area, measures for the protection of eyes and skin must be taken.

• 대한화장품학회지
• /
• 제26권1호
• /
• pp.41-58
• /
• 2000

최근 환경오염으로 인한 지구오존층의 파괴로 자외선의 지표면의 도달 량이 증가하고 그로 인한 인간에 대한 피해가 증가하고 있다 . 과도한 자외선의 피부에 대한 직접적인 노출은 피부에 많은 문제점을 야기하므로 일차적으로 자외선차단제를 이용하여 인체에 대한 직접적인 피해를 최소화 해야한다 . 현재 자외선 차단제는 유기자외선흡수제와 무기자외선산란제가 많이 사용이 되는데 적은량으로도 효과가 높은 유기자외선차단제는 사용 시 주의를 요하므로 국가별로 사용량과 사용여부에 대하여 규제를 하고 있다. 본 연구에서는 플라보노이드류 ,알카로이드류 같은 자외선 흡수 성분을 함유한 식물중 UV/vis spectrophotometer 에서 자외선 흡수 peak을 나타내는 금은화 , 포공영, 녹차 , 황금추출물을 이용하여 화장품의 자외선 흡수제로서의 사용가능성여부를 조사하였다. 또한 식물추출물이 가진 자극성 성분과 오염성, 그들이 가진 유효성분들을 보호하고자 실리콘을 이용한 겔화를 시도하였다 . 자연친화적인 천연물로써 식물추출성분을 이용 유기자외선흡수제의 사용량을 줄이는 자외선홉수보조제로서 가능성을 보여주었다.

• Journal of Radiation Protection and Research
• /
• 제43권3호
• /
• pp.114-119
• /
• 2018

Background: The retrospective dosimetry using RTL quartz can be improved by information for an optical sensitivity of sample connected with the equivalent dose determination. Materials and Methods: The quartz sample from a volcanic rock of Japan was used. After correcting the thermal quenching effect, RTL peaks of quartz were separated by the CGCD method cooperated with the general order kinetics. The number of overlapped glow peaks were ascertained by the $T_m-T_{stop}$ method. The optical sensitivity was examined by comparing the change of intensity on RTL glow peaks measured after exposure to light from a solar simulator with various illumination times. Results and Discussion: Seven glow peaks appeared to be overlapped on the RTL glow curve. The general order kinetics model was appropriate to separate glow peaks. After exposure to light from a solar simulator from a few minutes to 416 hr, the signals for peaks P4 and P5 decayed following the form of $f(t)=a_1e^{-{\lambda}1t}$, while the signals for peaks P6 and P7 decayed by the form of $f(t) = a_1e^{-{\lambda}1t}+a_2e^{-{\lambda}2t}+a_3e^{-{\lambda}3t}$. Conclusion: For dosimetric peaks, the times taken to reduce the RTL signal to half of its initial value were 70 sec for the peak P4, 54 s for the peak P5, 9,840 sec for the peak P6 and 26,580 sec for the peak P7, respectively. We conclude that the optical sensitivity of peaks P4, and P5 gives much higher than that of peaks P6 and P7.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.616-622
• /
• 2016

하절기 줄어드는 온수부하는 태양열 집열기 과열의 주된 원인이다. 과열방지목적으로 공냉 또는 차단막이 사용되는데 이는 추가적인 기계적요소를 필요하게 되고 장기 운용 시 파손 등의 우려에 따라 그 신뢰도도 크게 저하된다. 지중열교환기는 지열을 열원으로 방열 또는 흡열을 진행하는데, 지열을 고 열원으로 하여 흡열을 목적으로 하는 연구가 대다수이며 지열원이 저열원으로 이용하는 방열에 대한 연구는 부족한 편이다. 그리하여 본 연구에서는 태양열집열판의 과열방지를 목적으로 하는 지중열교환기의 가능성 및 그 성능에 대한 연구를 진행하였다. 여름철 최대 $150^{\circ}C$이상의 고온을 유지하는 태양열집열판의 열을 방출하기 위하여 1.2m의 하부 깊이를 갖는 50m 나선형 지중열교환기를 설치하였고 이를 통해 순간 냉각이 가능한 것으로 확인되었으며, 태양열집열판의 여름철 과열에 의한 파손을 방지할 수 있었다. 그리고 다양한 변수에 대한 이론적인 계산을 통하여 0.33kg/s의 최저 순환유량만 유지해주면 지열 열교환기의 길이에 따른 방열효과에 큰 영향을 미치지 않음을 판단할 수 있다. 또한 축열조와의 공동 사용시 냉각효과는 여름철 과열시 충분한 과열방지 제어가 가능한 것으로 조사되었다.

• Safety and Health at Work
• /
• 제12권2호
• /
• pp.244-248
• /
• 2021

Background: Sunburn is the main avoidable cause of skin cancer. Beach lifeguards spend many hours exposed to the effects of solar radiation during their work day, precisely at times of the year when levels of solar irradiation are highest. The aim of this study is to quantify the risk to beach lifeguards of sun exposure. Methods: A descriptive cross-sectional study was carried out in the Western Costa del Sol, southern Spain, during the summer of 2018. The research subjects were recruited during a skin cancer prevention course for beach lifeguards. All participants were invited to complete a questionnaire on their habits, attitudes, and knowledge related to sun exposure. In addition, ten were specially monitored using personal dosimeters for three consecutive days, and the results were recorded in a photoprotection diary. A descriptive analysis (mean and standard deviation for the quantitative variables) was performed, and inter-group differences were evaluated using the Mann-Whitney U test. Results: Two hundred fifteen lifeguards completed the questionnaire, and 109 met the criteria for inclusion in this analysis. The mean age was 23.8 years (SD: 5.1), 78.0% were male, 71.5% were phototype III or IV (Fitzpatrick's phototype), and 77.1% had experienced at least one painful sunburn during the previous summer. The mean daily personal ultraviolet exposure per day, the minimal erythema dose, and the standard erythema dose, in J/m², were 634.7 [standard deviation (SD): 356.2], 2.5 (SD: 1.4) and 6.35 (SD: 3.6), respectively. Conclusion: Beach lifeguards receive very high doses of solar radiation during the work day and experience correspondingly high rates of sunburn. Intervention strategies to modify their sun exposure behavior and working environment are necessary to reduce the risk of skin cancer for these workers and to promote early diagnosis of the disease.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.89-98
• /
• 2011

This study examined the energy performance according to the main design parameters of a solar water heating system for an office building using the life cycle cost (LCC) optimization simulations. The LCC optimization simulations of the system were conducted with TRNSYS and GenOpt employing the Hooke-Jeeves algorithm for cases where water temperature was $60^{\circ}C$ and $50^{\circ}C$. The results showed that for water temperature at $60^{\circ}C$ and $50^{\circ}C$ the global radiation incident on the collector could be decreased by 16.98% and 28.52%, collector useful energy gain could be decreased by 15.04% and 22.59%, energy to load from storage tank could be decreased by 10.86% and 18.06% and AH energy to load could be increased by 16.86% and 38.50% respectively compared to a non-optimized system. The annual average collection efficiency of the collector was increased by 0.88% for $60^{\circ}C$ and 2.78% for $50^{\circ}C$ because of increase of collector slope and decrease of the mass flow rate per collector area. The annual average efficiency of the system was increased by 1.74% and 3.47% compared to the basis system. However, the annual solar fraction of the system was decreased by 6.68% for $60^{\circ}C$ and 11.26% for $50^{\circ}C$ due to decrease of collector area and storage tank volume.