• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.190-193
• /
• 2001

In order to verify the efficiency or availability and stability of photovoltaic(PV) generation systems, huge system apparatuses are needed, in general, in which an actual size of solar panel, a type of converter system and some amount of load facilities should be installed in a particular location. It is also hardly possible to compare a Maximum Power Point Tracking (MPPT) control scheme with others under the same weather and load conditions in an actual PV generation system. The only and a possible way to bring above-mentioned problem to be solved is to realize a transient simulation scheme for PV generation systems using real weather conditions such as insolation and surface temperature of solar cell. The authors, in this paper, introduces a novel simulation method, which is based on a real-time digital simulator (RTDS), for PV generation systems under the real weather conditions. Firstly, VI characteristic equation of a solar cell is developed as an empirical formula and reconstructed in the RTDS system, then the real data of weather conditions are interfaced to the analogue inputs of the RTDS. The outcomes of the simulation demonstrate the effectiveness of the proposed simulation scheme in this paper. The results shows that the cost effective verifying for the efficiency or availability and stability of PV generation systems and the comparison research of various control schemes like MPPT under the same real weather conditions are possible.

• 한국태양에너지학회 논문집
• /
• 제33권2호
• /
• pp.35-41
• /
• 2013

Dye-sensitized solar cell (DSC) allows light transmission and the application of various colors that make it especially suitable for building-integrated PV (BIPV) application. In order to apply DSC module into windows, it has to be panelized: DSC module should be protected with reinforced glass to the entire surface. Up to date, it seems to be common to make double glazing with DSC modules with air gaps between the glasses and the DSC modules. Few research has been conducted on the characteristics of various glazing types with DSC modules. This study aims to analyze the electrical performance of DSC modules according to panelizing method for glazing unit with DSC modules. The prototype of the DSC glazing that applied silicone filler between DSC modules and glasses was developed. The electrical performances of this type of DSC glazing with the filler and rather conventional double glazing with DSC modules were compared. Their performances were measured using a solar simulator that is suitable for DSC performance testing. The results indicated that the electrical performance of the filler type DSC glazing improved by 7% compared to that of the conventional DSC double glazing type.

• 한국항해항만학회지
• /
• 제42권3호
• /
• pp.167-176
• /
• 2018

해상에서 운용되는 일점계류형 해양플랜트의 태양광 발전 시스템은 독립 전원 체계를 가지고 있으며, 해상 환경, 부조일수 등의 영향으로 안정적인 전력을 공급하는 것이 중요하다. 이러한 이유로 태양광 패널을 여러 방향으로 설치하게 되는데, 이 때 각 패널마다 입사되는 광량이 달라지므로 부분음영현상이 발생하게 된다. 육상용 태양광 발전시스템의 발전량은 위도의 영향을 받으므로 우리나라의 경우 $30{\sim}36^{\circ}$ 사이의 각도로 설치하는 것이 일반적이나, 일점계류형 해양플랜트에 설치되는 태양광 발전 시스템의 경우 부분 음영 현상에 의해 최대전력점이 제어 가능 범위 밖에 존재하는 경우가 발생하게 되고 이는 전력 발전 손실이 된다. 이 때 두 패널의 광량차이를 줄임으로써, 최대 전력점을 MPPT 알고리즘이 추종 가능한 범위에 존재하게 하여 발전 효율을 더 높일 수 있으며, 시뮬레이션 결과 설치각도 $20^{\circ}$에서 가장 높은 발전 효율 가짐을 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제26권11호
• /
• pp.11-19
• /
• 2021

본 논문은 충전식 배터리의 단점을 보완하여 급속 충전과 방전이 가능하고 높은 전력 효율 및 반영구적인 충·방전 사이클 수명의 특성을 갖는 수퍼커패시터를 보조 전력 저장장치로 사용하여 전력 관리 시스템에 결합한 프로토타입 플랫폼을 제안한다. 본 논문의 플랫폼을 위해 물리적인 환경 변화에 따른 태양광 패널에서의 공급 전력 차단 혹은 재개 상태를 마이크로컨트롤러에 연결된 인터럽트를 통해 감지할 수 있는 기법을 개발하였다. 연속적인 전원 공급이 보장되지 않는 컴퓨팅 환경에서 데이터의 유실을 방지하기 위해 전원 공급이 차단되는 경우 휘발성 메모리에 있는 프로그램 문맥 및 데이터를 비휘발성 메모리로 이전하는 낮은 수준의 시스템 소프트웨어를 마이크로컨트롤러에 구현하였다. 실험을 통해 슈퍼커패시터가 보조 전력 저장장치로서 일시적 전원 공급에 효과적으로 하는지를 검증하였으며 다양한 벤치마크를 통해 전원 상태 감지 및 휘발성 메모리에서 비휘발성 메모리로의 프로그램 문맥 및 데이터의 이전 기법이 낮은 오버헤드를 갖음을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.588-594
• /
• 2009

The maximum power point operation point(MPPOP) of photovoltaic(PV) power generation systems changes with varying atmospheric conditions such as temperature, solar radiation. For achieving a high efficiency in PV system, it is very important for PV system to track the MPPOP correctly according to operation condition. Although the MPPT(maximum power point tracking) algorithm which applied P&O(Perturbation & Observation) or IncCnd(Incremental Conductance) algorithm tracks the MPPOP efficiently, its efficiency drops noticeably in case that the incidence angle of PV panel on buoy changes rapidly. To solve this problem, this paper proposes maximum power point searching and tracking algorithm(MPPST). The proposed algorithm set the specific area and measures the PV voltage at the same interval. The proposed algorithm have been obtained high efficiency than P&O algorithm through ocean experiment.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1389-1399
• /
• 2015

This research suggests maximum power point tracking (MPPT) for the solar photovoltaic (PV) power scheme using a new constant voltage (CV) fractional order incremental conductance (FOINC) algorithm. The PV panel has low transformation efficiency and power output of PV panel depends on the change in weather conditions. Possible extracting power can be raised to a battery load utilizing a MPPT algorithm. Among all the MPPT strategies, the incremental conductance (INC) algorithm is mostly employed due to easy implementation, less fluctuations and faster tracking, which is not only has the merits of INC, fractional order can deliver a dynamic mathematical modelling to define non-linear physiognomies. CV-FOINC variation as dynamic variable is exploited to regulate the PV power toward the peak operating point. For a lesser scale photovoltaic conversion scheme, the suggested technique is validated by simulation with dissimilar operating conditions. Contributions are made in numerous aspects of the entire system, including new control algorithm design, system simulation, converter design, programming into simulation environment and experimental setup. The results confirm that the small tracking period and practicality in tracking of photovoltaic array.

• Environmental Engineering Research
• /
• 제21권3호
• /
• pp.219-225
• /
• 2016

Energy self-reliance is important for economic growth and development for any nation. An energy self-reliance technological analysis for Kampala the capital city of Uganda is presented. Three renewable energy sources: Municipal Solid Waste (MSW), solar and wind are assessed for the period of 2014 to 2030. Annual MSW generation will increase from $6.2{\times}10^5$ tons in 2014 to $8.5{\times}10^5$ and $1.14{\times}10^6$ tons by 2030 at 2% and 3.9% population growth respectively. MSW energy recovery yield varies from 136.7 GWh (2014, 65% collection) to 387.9 GWh (2030, 100% collection). MSW can at best contribute 2.1% and 1.6% to total Kampala energy demands for 2014 and 2030 respectively. Wind contribution is 5.6% and 2.3% in those respective years. To meet Kampala energy demands through solar, 26.6% of Kampala area and 2.4 times her size is required for panel installation in 2014 and 2030 respectively. This study concludes that improving renewable energy production may not necessarily translate into energy self-reliant Kampala City based on current and predicted conditions on a business as usual energy utilization situation. More studies should be done to integrate improvement in renewable energy production with improvement in efficiency in energy utilization.

• 한국태양에너지학회 논문집
• /
• 제30권6호
• /
• pp.73-80
• /
• 2010

This study was conducted to estimate the relative performance of modules with changed characteristics due to long term exposure to the outdoor environment, with a specially made test device for simultaneous measurement of real time power output from the photovoltaic array, taking into account the inclined panel, direct irradiation, power being generated, temperature as well as the optimal analysis timing. In terminology description, M is an abbreviation of module and Group A, Group B are 10 modules series connection (1~10 of M), (11~20 of M) for each of them respectively. The overall mean voltage difference of M-18 with the lowest power output and M-14 with the highest output is-2.13V and it was identifiable that voltage difference was more concentrated to Group B. In addition, in case of M-2 and M-7, M-8, when compared with M-14, the overall mean voltage difference was -0.92V, -1.56 and -0.91V respectively showing the more concentration to Group A. When the temperature of module went up by $1^{\circ}C$, the mean voltage was reduced by 0.35V. For current, Group A was lower than Group B by-0.022A and the ratio of each group was 49.68% and 50.32% respectively, presumably the module with deteriorated properties were more concentrated to Group A relatively. From the comparison of relations with the comprehensive accumulation, M-2, M-7, M-8, M-16 and M-18 were those with deterioration of performance to the worst, thereby requiring precision examination. In comparative efficiency, M-14 was the most excellent one as 12.19% while M-18 as 10.53% was identified that its efficiency was comparatively rapidly reduced.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.255-258
• /
• 2022

최근 환경 오염이 지속되면서 신재생 에너지에 대한 사람들의 관심이 높아지고 있다. 제주 지역은 태양광, 태양열, 바이오, 풍력 발전 등 신재생 에너지 발전이 많이 이루어지고 있지만, 그에 비하여 관련 데이터의 개방과 분석 사례는 부족한 상황이다. 이에 본 연구에서는 전 세계 데이터 사이언티스트(Data Scientists)들이 활동하고 있는 캐글(Kaggle) 플랫폼을 활용하여 태양광 생산량과 관련된 변수를 추출하고, 데이터에 적용할 수 있는 머신러닝(Machine Learning) 기법을 탐구하여 머신 러닝 설계를 위한 제주 지역의 태양광 발전 데이터셋(Dataset) 형태(Form)를 제시하고자 한다. 구체적으로는 캐글 데이터 플랫폼을 활용하여 태양광 에너지 분석을 진행한 후 제주 지역 태양광 데이터 수집에 대한 보완점을 제안할 수 있다. 이러한 시도는 제주 지역의 태양광 산업의 발전을 위한 데이터 분석에 활용이 가능할 것으로 기대할 수 있다. 즉, 현재 개방되어 있는 제주 지역의 태양광 발전 데이터셋 형태를 인공지능(Artificial Intelligent) 분석을 위한 머신러닝에 적합한 형태로 구축이 될 수 있도록 제안할 수 있다. 이를 통하여 제주 지역 태양광 산업의 발전의 효율을 높이는 방안을 마련하는데 기반 연구가 될 것이다.

• Journal of Astronomy and Space Sciences
• /
• 제27권4호
• /
• pp.353-357
• /
• 2010

In general, the information of inertia properties is required to control a spacecraft. The inertia properties are changed by some activities such as consumption of propellant, deployment of solar panel, sloshing, etc. Extensive estimation methods have been investigated to obtain the precise inertia properties. The gyro-based attitude data including noise and bias needs to be compensated for improvement of attitude control accuracy. A modified estimation method based on the law of conservation of angular momentum is suggested to avoid inconvenience like filtering process for noise-effect compensation. The conventional method is modified and beforehand estimated moment of inertia is applied to improve estimation efficiency of product of inertia. The performance of the suggested method has been verified for the case of STSAT-3, Korea Science Technology Satellite.