• 제목/요약/키워드: SolE

검색결과 384건 처리시간 0.033초

광전자소자의 응용을 위한 산화아연 나노로드의 패터닝 형성방법

  • 고영환;유재수
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.97-97
    • /
    • 2011
  • 산화아연 (ZnO)은 넓은 에너지 밴드갭 (~3.37 eV), 큰 엑시톤 결합 에너지 (~60 meV) 그리고 높은 전자 이동도 (bulk~300 $cm^2Vs^{-1}$, single nanowire~1000 $cm^2Vs^{-1}$)를 갖고 있어, 광전자 소자 및 반도체소자 응용에 매우 널리 사용되고 있다. 특히, 산화아연 나노로드(ZnO nanorod)는 1차원 나노구조로써 더욱 향상된 전자 이동도와 캐리어의 direct path way를 제공하여 차세대 광전자소자 및 태양광 소자의 응용에 대한 연구가 매우 활발하게 이루어지고 있다. 한편, 이러한 산화아연 나노로드를 성장시키기 위하여 VLS (vapor-liquid-solid), 졸-겔 공정(sol-gel process), 수열합성(hydrothermal synthesis), 전기증착(electrodeposition)등 다양한 방법이 보고되었지만, 이러한 산화아연 나노로드의 성장방법은 실제적인 소자응용을 위한 패터닝 형성에 대하여 제약을 받는 문제점이 있다. 이들 중에서 수열합성법과 전극증착법은 ZnO 또는 AZO (Al doped ZnO) seed 층 표면과 성장용액의 화학반응에 의해서 선택적으로 산화아연 나노로드를 성장시킬 수 있다. 이에 본 연구에서는, 광전자소자의 응용을 위한 간단한 패터닝 공정을 위해, 산화인듐주석(ITO) 박막이 증착된 유리기판(glass substrate)위에 수열합성법과 전극증착법을 이용하여 산화아연 나노로드를 선택적으로 성장시켰다. 실험을 위해, ITO glass 위에 RF magnetron 스퍼터를 사용하여 AZO seed 층을 metal shadow mask를 이용하여 패터닝을 형성한 후, 질산아연과 헥사메틸렌테트라아민으로 혼합된 용액에 $85^{\circ}C$ 온도를 유지하여, 패터닝이 형성된 샘플에 전압을 인가하여 성장시켰다. 나노구조 분석을 위해, 전계주사현미경을 이용하여 수열합성법과 전기증착법에 의한 패터닝된 산화아연 나노로드를 비교하여 관찰하였다.

  • PDF

작은 풀화재에서의 연기 특성 (Smoke Characteristics of a Small Scale Pool Eire)

  • 이의주;안찬솔;신현준;오광철;이은도
    • 한국화재소방학회논문지
    • /
    • 제19권3호
    • /
    • pp.58-63
    • /
    • 2005
  • 등유 풀화재의 화염과 연소에 의해 생성되는 연기의 특성에 대해서 조사하였다. 다양한 발열량을 위해 직경을 변하게 할 수 있는 팬버너를 제작하였다. 풀화재를 조사하기 위해 화염 높이와 떨림 주파수를 분석하였다. 실험적으로 풀화염 높이는 이론적 상관관계 증가율과 잘 일치하지만, 정량적으로는 등유의 연소율에 기인하여 과대 평가된 값을 보인다. 연기의 특성을 조사하기 위해 세 가지의 실험방법을 사용하였다. 먼저 가스분석기를 이용하여 연소시 발생되는 주요 가스 농도를 측정하였는데 이산화탄소의 생성과 산소의 소모율은 풀화염의 열방출율에 비례하지만, 일산화탄소의 발생에 대한 경향성은 발견할 수 없었다. 연기의 매연입자를 광감쇄법과 TEM 이미지를 이용하여 특성을 조사하였다 연기밀도는 발열량의 증가에 따라 매우 급격히 증가하였고, 등유 풀화염에서 발생한 매연입자들은 자연적인 연소조건임에도 불구하고 역확산 제트화염에서 생성된 매연과 유사한 형태와 탄화정도를 보임이 관찰되었다.

Comparison of the MGISEQ-2000 and Illumina HiSeq 4000 sequencing platforms for RNA sequencing

  • Jeon, Sol A;Park, Jong Lyul;Kim, Jong-Hwan;Kim, Jeong Hwan;Kim, Yong Sung;Kim, Jin Cheon;Kim, Seon-Young
    • Genomics & Informatics
    • /
    • 제17권3호
    • /
    • pp.32.1-32.6
    • /
    • 2019
  • Currently, Illumina sequencers are the globally leading sequencing platform in the next-generation sequencing market. Recently, MGI Tech launched a series of new sequencers, including the MGISEQ-2000, which promise to deliver high-quality sequencing data faster and at lower prices than Illumina's sequencers. In this study, we compared the performance of two major sequencers (MGISEQ-2000 and HiSeq 4000) to test whether the MGISEQ-2000 sequencer delivers high-quality sequence data as suggested. We performed RNA sequencing of four human colon cancer samples with the two platforms, and compared the sequencing quality and expression values. The data produced from the MGISEQ-2000 and HiSeq 4000 showed high concordance, with Pearson correlation coefficients ranging from 0.98 to 0.99. Various quality control (QC) analyses showed that the MGISEQ-2000 data fulfilled the required QC measures. Our study suggests that the performance of the MGISEQ-2000 is comparable to that of the HiSeq 4000 and that the MGISEQ-2000 can be a useful platform for sequencing.

우리 성명(姓名)의 생성 발달에 대하여 (The Origin and Development of Korean Names)

  • 도수희
    • 인문언어
    • /
    • 제1권1호
    • /
    • pp.255-274
    • /
    • 2001
  • This paper examines the history of Korean names, focusing on the structural characteristics and the literal meanings of those for kings and ordinary people. Roughly speaking, the Korean surname system traces its source to China. Historical records show that the Chinese were already using their family names around 1000 B.C. After a millennium or so, the Korean began to follow suit. Initially, however, surnames were in regular use among kings and their kin only: it was not until the late Shilla dynasty, around A.D. 800, that the commoners began to have Heir surnames. And yet, surnames still tended to be limited to men of noble birth, until around A.D. 1000. Though the Korean surname system may be said to have its origin in Chinese, there are no lack of native surnames that have as long a history, e.g., Hae, Bak, Sok, Sol, Ul, and Ol. Typical surnames of Chinese origin that are found during the late Shilla dynasty, around A.D. 900, include Jang (as in Jang Bogo) and Choi (as in Choi Chiwon). Unlike those of Chinese origin, typical Korean names during the age of Three Nations tended to allude to nature or natural phenomena, as can be witnessed in Bit 'light,' Balgum 'bright,' Nuri 'world,' and Soidori where soi means 'steel' and dol 'stone,' Other surnames abound that have to do with river, stream, field, prairie, and so on. King Muryong's original name was Sama, a variant of som 'island,' indicating where he was born. A person skilled in archery was called Jumong or Hwalbo. Baembo was so called because he 'crawls like a snake, baem,' In these last two examples, bo, as well as its variant bu, functions as a suffix, and is also found in Cochilbu, Isabu, Babo, Nolbu, Hungbu, etc. The tradition of using this kind of native Korean names has gradually disappeared, giving place to the names of Chinese style-although very recently we see an on-going movement toward using native names.

  • PDF

Temperature Dependent Cation Distribution in Tb2Bi1Ga1Fe4O12

  • Park, Il-Jin;Park, Chu-Sik;Kang, Kyoung-Soo;Kim, Chul-Sung
    • Journal of Magnetics
    • /
    • 제13권3호
    • /
    • pp.110-113
    • /
    • 2008
  • In this study, heavy rare earth garnet $Tb_2Bi_1Ga_1Fe_4O_{12}$ powders were fabricated by a sol-gel and vacuum annealing process. The crystal structure was found to be single-phase garnet with a space group of Ia3d. The lattice constant $a_0$ was determined to be 12.465 ${\AA}$. From the analysis of the vibrating sample magnetometer (VSM) hysteresis loop at room temperature, the saturation magnetization and coercivity of the sample are 7.64 emu/g and 229 Oe, respectively. The N$\acute{e}$el temperature($T_N$) was determined to be 525 K. The M$\ddot{o}$ssbauer spectrum of $Tb_2Bi_1Ga_1Fe_4O_{12}$ at room temperature consists of 2 sets of 6 Lorentzians, which is the pattern of single-phase garnet. From the results of the M$\ddot{o}$ssbauer spectrum at room temperature, the absorption area ratios of Fe ions on 24d and 16a sites are 74.7% and 25.3%(approximately 3:1), respectively. These results show that all of the non-magnetic Ga atoms occupy the 16a site by a vacuum annealing process. Absorption area ratios of Fe ions are dependent not only on a sintering condition but also on the temperature of the sample. It can then be interpreted that the Ga ion distribution is dependent on the temperature of the sample. The M$\ddot{o}$ssbauer measurement was carried out in order to investigate the atomic migration in $Tb_2Bi_1Ga_1Fe_4O_{12}$.

Electrospun Antimicrobial Polyurethane Nanofibers Containing Silver Nanoparticles for Biotechnological Applications

  • Sheikh, Faheem A.;Barakat, Nasser A.M.;Kanjwal, Muzafar A.;Chaudhari, Atul A.;Jung, In-Hee;Lee, John-Hwa;Kim, Hak-Yong
    • Macromolecular Research
    • /
    • 제17권9호
    • /
    • pp.688-696
    • /
    • 2009
  • In this study, a new class of polyurethane (PU) nanofibers containing silver (Ag) nanoparticles (NPs) was synthesized by electrospinning. A simple method that did not depending on additional foreign chemicals was used to self synthesize the silver NPs in/on PU nanofibers. The synthesis of silver NPs was carried out by exploiting the reduction ability of N,N-dimethylformamide (DMF), which is used mainly to decompose silver nitrate to silver NPs. Typically, a sol-gel consisting of $AgNO_3$/PU was electrospun and aged for one week. Silver NPs were created in/on PU nanofibers. SEM confirmed the well oriented nanofibers and good dispersion of pure silver NPs. TEM indicated that the Ag NPs were 5 to 20 nm in diameter. XRD demonstrated the good crystalline features of silver metal. The mechanical properties of the nanofiber mats showed improvement with increasing silver NPs content. The fixedness of the silver NPs obtained on PU nanofibers was examined by harsh successive washing of the as-prepared mats using a large amount of water. The results confirmed the good stability of the synthesized nanofiber mats. Two model organisms, E. coli and S. typhimurium, were used to check the antimicrobial influence of these nanofiber mats. Subsequently, antimicrobial tests indicated that the prepared nanofibers have a high bactericidal effect. Accordingly, these results highlight the potential use of these nanofiber mats as antimicrobial agents.

Influence of pH and Dye Concentration on the Physical Properties and Microstructure of New Coumarin 4 Doped SiO2-PDMS ORMOSIL

  • Oh, E.O.;Gupta, R.K.;Cho, N.H.;Yoo, Y.C.;Cho, W.S.;Whang, C.M.
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권3호
    • /
    • pp.299-305
    • /
    • 2003
  • Physical properties and microstructure of new coumarin 4 doped $SiO_2$-PDMS ORMOSILs, synthesized by one-step (OS, acid-catalysis) and two-step (TS, acid-base catalysis) routes of sol-gel method with varying pH (0.6 to 7) and dye content $(5\;{times}\;10^{-4}\;to\;5{\times}\;10^{-2}\;mole)$, are reported. BET, UV-visible spectroscopy and SEM were used for characterizations. The increase in acid or base concentration increased the size of pores and aggregated silica particles. The samples with pH ≤ 2.5 were transparent and attributed to the small size of pores (~20 Å) and silica particles. The samples with pH > 2.5 were translucent or opaque due to non-uniform pore system formed by voids and large aggregated silica particles. The surface area was found a key factor controlling the interactions between the gel matrix and the dye. The OS samples with the highest dye concentration exhibited the minimal values of pore size, surface area and silica particle size, resulting in the concentration-quenching phenomenon.

Multi-coating법으로 제조된 두꺼운 PZT막의 두께 변화에 따른 미세구조 및 전기적 특성 (Microstructures and Electrical Properties of Thick PZT Films with Thickness Variation Fabricated by Multi-coating Method)

  • 박준식;장연태;박효덕;최승철;강성군
    • 한국재료학회지
    • /
    • 제12권3호
    • /
    • pp.211-214
    • /
    • 2002
  • Properties of 52/48 PZT films with various thicknesses for piezoelectric micro-electro mechanical systems (MEMS) devices fabricated by multi-coating method on $Pt(3500{\AA})/Ti(400{\AA})/SiO_2(3000{\AA})/Si$(525$\mu\textrm{m}$) substrates were investigated. PZT films were deposited by spin-coating process at 3500 rpm for 30 sec, followed by pyrolysis at 45$0^{\circ}C$ for 10 min producing the thickness of about 120nm. These processes were repeated 4, 8, 12, 16 and 20 times in order to have various thicknesses, respectively. Finally, they were crystallized at $650^{\circ}C$ for 30 min. All thick PZT films showed dense and homogeneous surface microstructures. Thick PZT films showed crystalline structures of random orientations with increasing thickness. Dielectric constants of thick PZT films were increased with increasing film thickness and reached 800 at 100kHz for 2.3$\mu\textrm{m}$ thick PZT film. $P_r\; and\; E_c$ of 2.3$\mu\textrm{m}$ thick PZT films were about 20$\mu$C/$\textrm{cm}^2$ and 63kV/cm. Depth profile analysis by Auger Electron Spectroscopy (AES) of 4800 $\AA$ thick PZT film showed the formation of the perovskite phase on Pt layer by Pb diffusion behavior. It was considered that Pb-Pt intermediate layer promoted PZT (111) columnar structures.

산처리 공정에 따라 추출한 돈피 젤라틴의 이화학적 특성에 관한 연구 (Effect of Acid Treatment Process on the Physicochemical Properties of Gelatin Extracted from Pork Skin)

  • 염건웅;;민상기
    • 한국축산식품학회지
    • /
    • 제24권3호
    • /
    • pp.266-272
    • /
    • 2004
  • 본 연구는 gelatin의 생산공정에서 각종 산 처리가 최종 gelatin의 품질에 어떤 영향을 주는지를 평가함으로써 양질의 gelatin을 생산하는데 기초를 제공하고자 하였다. Gelatin gel의 물성은 lactic acid로 처리한 gelatin이 높은 hardness, cohesiveness, brittleness를 나타내었고 다음으로는 citric acid, acetic acid 순으로 나타났다. Gelatin의 색도는 citric acid, 처리한 gelatin이 acetic acid나 lactic acid로 산침한 젤라틴 보다 높은 명도를 나타냈다. a-value는 acetic acid로 산침한 gelatin이 가장 높게 나타났으며 황색도를 나타내는 b-value는 lactic > acetic acid > citric acid 순으로 높게 나타났다. Gelatin의 점도를 측정한 결과 전단속도(shear rate)에 대한 전단응력(shear stress)의 관계는 모두 전단속도가 증가함에 따라 전단응력이 증가하는Newton성 유체로 판단되었다. 그 기울기는 acetic acid로 산침한 것이 가장 높게 나타났으며 lactic acid, citric acid 순으로 높게 나타났다. Gelatin내의 hydroxyproline 함량을 살펴보면 acetic acid(0.186 g/100 g sample)로 가장 높은 수치를 나타나며 다음으로 lactic acid, citric acid 순으로 나타났다. 그러나, sample중 crude protein 함량을 비교하면 acetic acid(68.74%), lactic acid(80.08%), citric acid(85.47%)로 나타났다. 이것은 gelatin의 열수 추출시 가장 작게 용출된 acetic acid가 가장 높은 collagenous connective tissue 함량(1.35 g/100g)을 나타내었다.

Prevalence and Characteristics of Antimicrobial-Resistant Staphylococcus aureus and Methicillin-Resistant Staphylococcus aureus from Retail Meat in Korea

  • Kim, Yong Hoon;Kim, Han Sol;Kim, Seokhwan;Kim, Migyeong;Kwak, Hyo Sun
    • 한국축산식품학회지
    • /
    • 제40권5호
    • /
    • pp.758-771
    • /
    • 2020
  • This study was to investigate the prevalence and characteristics of antimicrobial-resistant Staphylococcus aureus and methicillin-resistant S. aureus (MRSA) from 4,264 retail meat samples including beef, pork, and chicken in Korea between 2013 and 2018. A broth microdilution antimicrobial susceptibility testing was performed for S. aureus. Molecular typing by multilocus sequence typing (MLST), spa typing, and pulsed-field gel electrophoresis (PFGE), was performed on mecA-positive S. aureus strain. S. aureus was isolated at a rate of 18.2% (777/4,264), of which MRSA comprised 0.7% (29 strains). MLST analysis showed that 11 out of the 29 MRSA isolates were predominantly sequence type (ST) 398 (37.9%). In addition, ST72, ST692, ST188, ST9, and ST630 were identified in the MRSA isolates. The spa typing results were classified into 11 types and showed a high correlation with MLST. The antimicrobial resistance assays revealed that MRSA showed 100% resistance to cefoxitin and penicillin. In addition, resistance to tetracycline (62.1%), clindamycin (55.2%), and erythromycin (55.2%) was relatively high; 27 of the 29 MRSA isolates exhibited multidrug resistance. PFGE analysis of the 18 strains excluding the 11 ST398 strains exhibited a maximum of 100% homology and a minimum of 64.0% homology. Among these, three pairs of isolates showed 100% homology in PFGE; these results were consistent with the MLST and spa typing results. Identification of MRSA at the final consumption stage has potential risks, suggesting that continuous monitoring of retail meat products is required.