• Title/Summary/Keyword: SolE

Search Result 384, Processing Time 0.028 seconds

Photo-catalytic Characteristics of Sol-Gel Synthesized TiO2 Thin Film (졸-겔법을 이용한 TiO2 박막의 광촉매 특성)

  • Choi, Kyu-Man;Kim, Yeo-Hwan;Lim, Hae-Jin
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.2
    • /
    • pp.846-849
    • /
    • 2013
  • Thin film of $TiO_2$ was obtained by the sol-gel dip method on the brosilicate glass substrate. It was found that the film was about $1.5{\mu}m$ thick as obtained by 4 successive coatings and annealed at varied temperatures ranged from $300^{\circ}C$ to $1100^{\circ}C$ for 2 hrs. The substrate used was having the surface area of $100mm^2$. Increasing the annealing temperature caused to change in mineralogical phase of titanium oxide i.e., amorphous, crystalline antase to rutile phases. The particle size of the titanium oxide film were ranged from $0.1{\sim}0.54{\mu}m$ estimated by the SEM analysis. The material showed an absorbance maximum at the wavelength 390nm obtained by UV-visible spectrophotometer. These results therefore, indicated that the $TiO_2$ film obtained relatively at low annealing temperature consisted predominantly with anatase phase; possessed higher photocatalytic behavior i.e., 2.4 times higher than that of only UV lamp irradiation.

Visible Light Photocatalytic Properties of Bismuth Ferrite Prepared By Sol-Gel Method (졸-겔법으로 제조된 Bismuth ferrite의 가시광 광촉매 특성)

  • Park, Byung-Geon;Chung, Kyong-Hwan
    • Korean Chemical Engineering Research
    • /
    • v.58 no.3
    • /
    • pp.486-492
    • /
    • 2020
  • The method for preparing a perovskite-type bismuth ferrite (BFO) photocatalyst which reacts to visible LED light and the characteristics of visible light photocatalysis were investigated. BFO was prepared according to the sol-gel method. The prepared BFO consisted mainly of BiFeO3 structure and formed a nano-sized crystal including Bi24Fe2O39 structure. The BFO nano crystallines were identified from the UV-visible diffuse reflectance spectra to absorb UV and visible light up to about 600 nm. The bandgap of the BFO determined from the diffuse reflectance spectrum was about 2.2 eV. Formaldehyde was decomposed by the photoreaction of BFO photocatalysts with the visible light LED lamps with wavelengths of 585 nm and 613 nm. The narrow bandgap of BFO led to elicit BFO photocatalytic activity in visible LED light.

Effects of Annealing Conditions on the Properties of Bi1-xLaxTi3O12 Thin Films (열처리 조건이 Bi1-xLaxTi3O12 (x=0.75) 박막의 특성에 미치는 효과)

  • Park Moon Heum;Kim Sang Su;Gang Min Ju;Ha Tae Gon
    • Korean Journal of Materials Research
    • /
    • v.14 no.10
    • /
    • pp.701-706
    • /
    • 2004
  • Bismuth layered structure ferroelectric thin films, La-substituted $Bi_{4}Ti_{3}O_{12}$ ($Bi_{1-x}La_{x}Ti_{3}O_{12}$, x=0.75, BLT) were prepared on the $Pt(111)/Ti/SiO_2/Si(100)$ substrates by a sol-gel spin coating process. The thin films were annealed in various conditions, i.e., oxygen, nitrogen and vacuum atmospheres for various annealing time. We investigated the annealing condition effects on the grain orientation and ferroelectric properties. The measured XRD patterns revealed that the BLT thin films showed only $Bi_{4}Ti_{3}O_{12}$-type phase with random orientation. $La^{3+}$ ion substitution for $Bi^{3+}$ ion in perovskite layers of $Bi_{4}Ti_{3}O_{12}$ decreased the degree of c-axis orientation and increased the remanent polarization ($2P_{r}$). The remanent polarization ($2P_{r}$) and the coercive field ($2E_{c}$) of the BLT thin film annealed at $650^{\circ}C$ for 5 min in oxygen atmosphere were $87{\mu}C/cm^2$ and 182 kV/cm, respectively, at an applied electric field of 240 kV/cm. For all of the BLT thin films annealed in various conditions, the fatigue resistance was shown. The improvement of ferroelectric properties with La substitution in $Bi_{4}Ti_{3}O_{12}$ could be attributed to the changes in space charge densities and grain orientation in the thin film.

Synthesis of TiO2-Fe2O3 Nanocomposite Powders for Magnetic Photocatalyst (자성광촉매용 TiO2-Fe2O3 나노복합분말의 합성)

  • Lee Chang-Woo;Kim Soon-Gil;Yun Sung-Hee;Lee Jai-Sung;Choa Yong-Ho
    • Korean Journal of Materials Research
    • /
    • v.15 no.8
    • /
    • pp.508-513
    • /
    • 2005
  • [ $TiO_2-Fe_2O_3$ ] nanocomposite powders for magnetic photocatalyst were synthesized by sol-gel process, in which $TiO_2$ photocatalytic layer was formed on the surface of $\gamma-Fe_2O_3$ magnetic core. Transmission electron microscopy (TEM) observation and X-ray diffractometry (XRD) analysis revealed that$\gamma-Fe_2O_3$ nanoparticles, $10\~20nm$ in diameter, were coated by $TiO_2$ shell of 5nm in thickness and $TiO_2$ was anatase phase. Also hydroxyl group (-OH) used to decompose organic compounds was detected by Fourier transformation infrared spectrometry(FT-IR) analysis. UV-Visible spectrophotometry results showed that light absorption occurred in the wavelength range of $400\~700 nm$, and the band gap energy $(E_g)$ of powder was 1.8 eV. Finally it was found that the coercivity $(H({ci})$ and saturation magnetization $(M_s)$ of the powder were 79 Oe and 14.8 emu/g, respectively as experimental vibrating sample magnetometer (VSM) measurements.

Synthesis of Mullite Powders by the Geopolymer Technique (Geopolymer Technique에 의한 Mullite 분말의 합성)

  • Son, Se-Gu;Lee, Ji-Hyeon;Lee, Jeong-Mi;Kim, Young-Do
    • Journal of the Korean Ceramic Society
    • /
    • v.45 no.5
    • /
    • pp.303-308
    • /
    • 2008
  • Mullite precursors were synthesized with aluminosilicate gels from mixture of aluminum nitrate and sodium orthosilicate by the geopolymer technique at ambient temperature. Then, the gel was heat-treated in air up to $1200^{\circ}C$ at intervals of $100^{\circ}C$. Raw and heat-treated gels were characterized by TG-DTA, XRD, FTIR, $^{29}Si$ MAS-NMR, TEM. The result to examine the crystallization of behavior though DTA, the synthesized precursors were crystallized in the temperature range from $950^{\circ}C$ to $1050^{\circ}C$. The XRD results showed that the gel compositions were begun to crystallize at various temperature. Also, it was found that the precursors of M-4 begun to crystallize at about $950^{\circ}C$. The M-4 XRD peaks were characterized better than $M-1{\sim}M-3$ at $1000^{\circ}C$. The formation temperature of mullite in this study is much lower than that of previous sol-gel methods, which crystallized at up of $1200^{\circ}C$. TEM investigations revealed that the sample with 10 nm particle size was obtained via heat-treated at $1000^{\circ}C$ for M-4.

Complete genome sequence of Escherichia coli K_EC180, a bacterium producing shiga-like toxin isolated from swine feces

  • Kim, Hyeri;Cho, Jae Hyoung;Cho, Jin Ho;Song, Minho;Shin, Hakdong;Kim, Sheena;Kim, Eun Sol;Kim, Hyeun Bum;Lee, Ju-Hoon
    • Journal of Animal Science and Technology
    • /
    • v.63 no.2
    • /
    • pp.461-464
    • /
    • 2021
  • Escherichia coli normally colonizes the lower intestine of animals and humans, but some serotypes are foodborne pathogens. The Escherichia coli K_EC180 was isolated from swine feces that were collected from a weaner pig. In this genome announcement, E. coli K_EC180 was sequenced using PacBio RS II and Illumina NextSeq 500 platforms. The complete chromosome of E. coli K_EC180 is composed of one circular chromosome (5,017,281 bp) with 50.4% of guanine + cytosine (G + C) content, 4,935 of coding sequence (CDS), 88 of tRNA, and 22 of rRNA genes. The complete genome of E. coli K_EC180 contains the toxin genes such as shiga-like toxins (stxA and stxB).

Multi-coated YBa2Cu3O7-x Films Fabricated by a Fluorine-Free Sol-Gel Process

  • Cho, E.A.;Jang, G.E.;Hyun, O.B.
    • Journal of Magnetics
    • /
    • v.16 no.2
    • /
    • pp.186-191
    • /
    • 2011
  • [ $YBa_2C_3O_{7-x}$ ]films were fabricated on a $SrTiO_3$ (100) substrate using a trimethylaceate propionic acid (TMAP)-based MOD process by controlling the precursor solution viscosity, firing temperature, and by using various coatings. The viscosity of the precursor solution was controlled by the addition of Xylenes. The films were heat treated with different temperatures from 750 to $800^{\circ}C$. c-axis oriented films were obtained. After adding 9 ml of Xylene into the precursor solution, the $T_c$ of the YBCO film, which was coated 2 times and heat treated at $800^{\circ}C$, was 86 K and the measured $J_c$ was above 2.5 MA/$cm^2$ at 77 K in a zero-field.

Estimation for the Variation of the Concentration of Greenhouse Gases with Modified Shannon Entropy (변형된 샤논 엔트로피식을 이용한 온실가스 농도변화량 예측)

  • Kim, Sang-Mok;Lee, Do-Haeng;Choi, Eol;Koh, Mi-Sol;Yang, Jae-Kyu
    • Journal of Environmental Science International
    • /
    • v.22 no.11
    • /
    • pp.1473-1479
    • /
    • 2013
  • Entropy is a measure of disorder or uncertainty. This terminology is qualitatively used in the understanding of its correlation to pollution in the environmental area. In this research, three different entropies were defined and characterized in order to quantify the qualitative entropy previously used in the environmental science. We are dealing with newly defined distinct entropies $E_1$, $E_2$, and $E_3$ originated from Shannon entropy in the information theory, reflecting concentration of three major green house gases $CO_2$, $N_2O$ and $CH_4$ represented as the probability variables. First, $E_1$ is to evaluate the total amount of entropy from concentration difference of each green house gas with respect to three periods, due to industrial revolution, post-industrial revolution, and information revolution, respectively. Next, $E_2$ is to evaluate the entropy reflecting the increasing of the logarithm base along with the accumulated time unit. Lastly, $E_3$ is to evaluate the entropy with a fixed logarithm base by 2 depending on the time. Analytical results are as follows. $E_1$ shows the degree of prediction reliability with respect to variation of green house gases. As $E_1$ increased, the concentration variation becomes stabilized, so that it follows from linear correlation. $E_2$ is a valid indicator for the mutual comparison of those green house gases. Although $E_3$ locally varies within specific periods, it eventually follows a logarithmic curve like a similar pattern observed in thermodynamic entropy.

HPV 16 E6/E7 Transgenic Mice have Hyperkeratosis and Elevated ROS Related Enzyme Activities

  • Kim, Myoung-Ok;Lee, Eun-Ju;Kim, Sung-Hyun;Park, Jun-Hong;Kyoungin-Cho;Jung, Boo-Kyung;Kim, Hee-Chul;Sol ha Hwang;Kim, Sun-Jung
    • Proceedings of the KSAR Conference
    • /
    • 2003.06a
    • /
    • pp.45-45
    • /
    • 2003
  • Human papillomavirus type 16(HPV16) has been known to the major factor for the development of uterine cervical carcinomas. We have extended these studies to investigate the in vivo activities of HPV-16 E6/E7 when expressed in squamous epithelia of transgenic mice. Grossly, hK14HPV16E6/E7 transgenic mice had multiple phenotypes, including wrinkled skin that was apparent prior to the appearance of hair on neonates, thickened ears, and loss of hair in adults. In the transgenic mice, the wrinkled skin phenotype on the body and legs died at the age of 3∼4 weeks. Histological analysis of demonstrated that E6/E7 causes epidermal hyperplasia in multiple transgenic lineages with high penetrance. This epithelial hyperplasia was characterized by an expansion of the proliferating compartment and an expansion of the keratinocyte and was associated with hyperkeratosis. These transgenic mice expressed E6/E7 transgene mainly in skin, heart, pancreas and kidney. Hyperplasia was found at the skin. The enzyme activities of GR, GPx and CuZnSOD were measured from the transgene cause keratinocyte at the skin. The specific enzyme activities were significantly higher in transgenic mice skin compared to the normal mice skin. Thus these transgenic mice may be useful for the develpment of antioxidant enzymes or other therapies for HPV-associated hyperkeratosis.

  • PDF