• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.05a
• /
• pp.108-109
• /
• 1993

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.281-282
• /
• 2007

$Mg_4Nb_2O_9$ (MN) ceramics have been prepared by a sol-gel method. The powder characteristics, phase evolution, and microwave dielectric properties of the MN were investigated in various processing conditions such as sol-gel compositions, calcination, and sintering temperatures. A Qxfo value of 111,717 GHz with a ${\varepsilon}_r$ of 10.59 and a ${\tau}_f$ of $+1.736\;ppm/^{\circ}C$ was obtained after sintering at $1300^{\circ}C$ for 5 h.

• Journal of the Korean Ceramic Society
• /
• v.28 no.12
• /
• pp.1012-1018
• /
• 1991

SiC whisker-reinforced LAS matrix composites were developed by a mixed colloidal processing route. An optimization of processing conditions was made using the zeta potential data of silica, boehmite, and SiC whisker dispersions. Similarly, the SiC whisker-reinforced composites were also fabricated by the conventional sol-gel process using the hydrolysis-condensation reaction of relevant metal alkoxides. The composites fabricated by the mixed colloidal processing route were characterized by a uniform spatial distribution of SiC whisker throughout the matrix. The fracture toughness increased from 1.3 MPa.m1/2 for the LAS specimen to 5.0 Mpa.m1/2 for the hot-pressed composite (95$0^{\circ}C$ and 20 MPa for 20 min) containing 20 wt% SiC whisker. The increase in fracture toughness appears to result mainly from the crack deflection and the crack bridging by whiskers with some additional toughenings from the whisker pullout and the matrix prestressing mechanisms.

• Journal of the Korean Ceramic Society
• /
• v.28 no.11
• /
• pp.865-872
• /
• 1991

LAS (lithium aluminosilicate) sol was synthesized using the hydrolysis-condensation reaction of TEOS, chelated Al(OBus)3 and LiNO3 with H2O in alcohol (ethanol+2-propanol) medium. Lowering Li content by a factor of 1/2 significantly enhanced densification and retarded the crystallization of LAS gel by ~30$0^{\circ}C$. Dense LAS specimen with essentially pore-free microstructure was obtained by sintering the sol-gel derived gel at 80$0^{\circ}C$ for 4 h and annealing at 120$0^{\circ}C$ for 2 h. Similary, a mixed colloidal processing was attempted as a convenient, alternative route for the fabrication of dense LAS sintered body. The $\beta$-spodumene seeding (~0.8 ${\mu}{\textrm}{m}$) in the sol-gel derived LAS modified the sequence of phase transformations and lowered the temperature of crystallization by ~12$0^{\circ}C$. Combining the epitaxial seeding with the sol-gel process, we could lower the crystallization temperature to the sintering temperature range (~80$0^{\circ}C$) and, demonstrate a possibility of making the viscous sintering/crystallization as a continuous as a continuous unit process.

• Journal of the Korean Ceramic Society
• /
• v.28 no.5
• /
• pp.365-372
• /
• 1991

LAS (lithium aluminosilicate) sol was synthesized using the hydrolysis-condensation reaction of TEOS, chelated Al(OBus)3 and Li-salt with H2O in alcohol (EtOH+2-Propanol) medium. Effects of important reaction parameters on the properties of sol and gel-derived LAS were examined. The crystallization of the sol-gel derived LAS with ${\beta}$-spodumene composition began at ∼600$^{\circ}C$, and a series of polymorphic transformations occurred as temperature was increased to 1100$^{\circ}C$: amorphous LAS\longrightarrowhexagonal LiAl(SiO3)2\longrightarrow${\beta}$-spodumene. Lowering Li content in the gel enhanced densification and retarded the crystallization significantly. Optimum reaction conditions of LAS sol formation for thin coating applications were derived from rheological measurements, and these can be summarized as: H2O/total alkoxides molar ratio=4, pH=∼2.5, and aging time of ∼250h.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.05a
• /
• pp.32.1-32.1
• /
• 2007

• Journal of Information Display
• /
• v.10 no.1
• /
• pp.24-27
• /
• 2009

A simple nonalkoxide sol-gel route for depositing an Al-doped ZnO thin film on a glass substrate was derived in this study. The initial Al dopant concentration in the sol-gel preparation varied and ranged from 0 to 5%. The sol-gel-derived thin films showed c-plane preferred crystallization of their hexagonal phase, with nanosized grain structures. First and second post-heat-treatments were carried out to improve the film’s electrical resistivity. The carrier density and the Hall mobility were measured and discussed to explain the electrical resistivity. The optical transmittance within the visible range showed compatible properties, which indicates the possible use of A1-doped ZnO as a transparent electrode in flat panel displays.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1328_1329
• /
• 2009

Nano porous indium tin oxide (ITO) powder was synthesized employing a new route sol-gel combustion hybrid method using Ketjen Black as a fuel. The nano porous ITO powder was composed of $SnCl_4$-98.0% and $In(NO_3)_3{\cdot}XH_2O$-99.999%, produce with a $NH_4OH$ with sol-gel method as a catalyst [1,2]. Crystal structures were examined by powder X-ray diffraction (XRD), and those results show shaper intensity peak at $25.6^{\circ}(2{\Theta})$ of $SnO_2$ by increased sintering temperature. A particle morphology as well as crystal size was investigated by scanning electron microscopy(FE-SEM), and the size of the nano porous powder was found to be in the range of 20~30nm. ITO films could controlled by nano porous powder at various sintering temperature in this paper[3,4]. The sol-gel combustion method was offered simple and effective route for the synthesis of nano porous ITO powder[5].

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.414-417
• /
• 2011

Indium tin oxide (In:$SnO_2$) nanoparticles were synthesized employing a sol-gel combustion method followed by annealing. The TG, XRD, XPS and SEM results of the precursor powders and calcinated In:$SnO_2$ nanoparticles were investigated. Crystal structures were examined by powder XRD, and those results show shaper intensity peak at $25.6^{\circ}$ ($2{\theta}$) of $SnO_2$ by increased annealing temperature. A particle morphology and size was examined by SEM, and the size of the nanoparticles was found to be in the range of 20~30nm. In:$SnO_2$ films could controlled by nanoparticle material at various annealing temperature. The sol-gel combustion method was offered simple and effective route for the synthesis of In:$SnO_2$ nanoparticles.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1078-1084
• /
• 2002

The formation temperature for the perovskite lead zirconate titanate [Pb(Zr,Ti)O3, PZT] derived from sol-gel route was lowered by more than $100^{\circ}C$ with the addition of crystallographically suitable seed particles, such as barium titanat e (BT) or PZT. We investigated the effect of seeding on the crystallization of perovskite phase and in the microstructure of the sol-gel derived PZT powder by varying the concentration, size and chemical species of seed particles. The phase transition as a function of temperature was monitored by DTA, XRD, and Raman spectroscopy, and the interface between the seed particle and grown PZT layer was analyzed by SEM and high resolution TEM techniques. It was found that both the heterogeneous and homogeneous nucleation contributes competitively in the formation of perovskite PZT grains.