• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.29.1-29.1
• /
• 2011

The selective catalytic reduction (SCR) of $MnO_x$ with $NH_3$ is an effective method for the removal of $MnO_x$ from stationary system. The typical catalyst for this method is $V_2O_5-WO_3(MoO_3)/TiO_2$, caused by the high activity and stability. However, This catalyst is active within $300{\sim}400^{\circ}C$ and occurs the pore plugging from the deposition of ammonium sulfate salts on the catalysts surface. It needs to locate the SCR unit after the desulfurizer and electrostatic precipitator without reheating of the flue gas as well as deposition of dust on the catalyst. The manganese oxides supported on titania catalysts have attracted interest because of its high SCR activity at low temperature. The catalytic activity of $MnO_x/TiO_2$ SCR catalyst with different manganese precursors have investigated for low-temperature SCR in terms of structural, morphological, and physico-chemical analyses. The $MnO_x/TiO_2$ were prepared from three different precursors such as manganese nitrate, manganese acetate (II), and manganese acetate (III) by the sol-gel method and then it calcinated at $500^{\circ}C$ for 2 hr. The structural analysis was carried out to identify the phase transition and the change intensity of catalytic activity by various manganese precursors was analyzed by FT-IR and Raman spectroscopy. These different precursors also led to various surface Mn concentrations indicated by SEM. The Mn acetate (III) tends to be more suppressive the crystalline phase (rutile), and it has not only smaller particle size, but also better distributed than the others. It was confirmed that the catalytic activity of MA (III)-$MnO_x/TiO_2$ was the highest among them.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.109-109
• /
• 2012

아라미드 섬유는 태양광의 직사광선에 계속 노출될 경우 120주 경과 후에는 강도가 3분의 1로 떨어지는 단점이 있다. 이와 같은 단점을 보완하기 위해 나노 크기의 금속산화물인 $TiO_2$ 졸-겔 나노합성법을 이용하여 나노졸을 제조하고 이를 직물에 함침하는 공정을 통하여 아라미드 섬유의 내광성 증진에 대해 연구하였다. TTIP, TEOS 등의 금속전구체를 이용하여 구형의 나노졸 합성에 의한 $TiO_2$ 나노졸을 수분산형태의 졸로서 섬유가공 공정상에 접목하였다. 제조된 나노크기의 $TiO_2$ 입자분포와 크기, 미세구조 및 결정상을 알아보기 위해 입도분포분석기, TEM, XRD를 이용하였다. $TiO_2$ 나노졸을 함침한 아라미드 직물은 내광성은 24, 48, 96시간 동안 Xenon-arc 광조사한 후, 물성변화를 분석하였다. 나노졸 합성시 반응물의 농도 및 용액의 pH 조건에 따른 나노졸의 미세구조를 TEM을 이용하여 관찰한 결과, 반응물의 농도에 따라 평균입도는 313.7nm, 500.5nm, 840.3nm, 1002nm로 커졌다. 하지만, 반응물의 농도가 증가할수록 시간이 지남에 따라 입자들이 층 분리 현상이 관찰되었으며, 단분산된 나노졸 입자를 제조하기 위해서는 TTIP의 투입량을 0.67mole(200ml)로 유지하였다. 또한 이를 아라미드 직물에 함침하여 광조사 시간에 따른 아라미드 섬유의 물리적 특성의 변화를 분석하였다.

• Archives of Pharmacal Research
• /
• 제28권6호
• /
• pp.736-742
• /
• 2005

Xyloglucan (XG), which exhibits thermal sol to gel transition, non-toxicity, and low gelation concentration, is of interest in the development of sustained release carriers for drug delivery. Drug-loaded XG beads were prepared by extruding dropwise a dispersion of indomethacin in aqueous XG solution (2 wt.-$\%$) through a syringe into corn oil. Enteric coating of XG bead was performed using Eudragit L 100 to improve the stability of XG bead in gastrointestinal (GI) track and to achieve gastroresistant drug release. Release behavior of indomethacin from XG beads in vitro was investigated as a function of loading content of drug, pH of release medium, and concentration of coating agent. Adhesive force of XG was also measured using the tensile test. Uniform-sized spherical beads with particle diameters ranging from 692 $\pm$ 30 to 819 $\pm$ 50 $\mu$m were obtained. The effect of drug content on the release of indomethacin from XG beads depended on the medium pH. Release of indomethacin from XG beads was retarded by coating with Eudragit and increased rapidly with the change in medium pH from 1.2 to 7.4. Adhesive force of XG was stronger than that of Carbopol 943 P, a well-known commercial mucoadhesive polymer, in wet state. Results indicate the enteric-coated XG beads may be suitable as a carrier for oral drug delivery of irritant drug in the stomach.

• 한국수소및신에너지학회논문집
• /
• 제26권3호
• /
• pp.212-220
• /
• 2015

The engineering plastic of sulfonated polyether ether ketone (SPEEK) as a polymer matrix has been developed in this lab to replace Nafion, solid polymer electrolytes of perfluorosulfonic acid membrane which has several flaws such as high cost, and limited operational temperature above $80^{\circ}C$. The SPEEK was prepared in the sulfonation reaction of polyether ether ketone (PEEK). The organic-inorganic blended composite membranes were prepared by sol-gel casting method with loading the highly dispersed ceria and cesium-substituted tungstosilicic acid (Cs-TSiA) with cross-linking agent contents of 0.01 mL. In conclusion, CL-SPEEK/Cs-TSiA/ceria 1% membrane showed the optimum results such as 0.1882 S/cm of proton conductivity at $80^{\circ}C$, and 99.61 MPa of tensile strength which were better than Nafion 117 membrane.

• 공업화학
• /
• 제18권2호
• /
• pp.142-147
• /
• 2007

본 연구에서는 주형물질로 $C_{16}TMABr$을 이용하여 염기 조건하에서 메조세공을 갖는 산화주석을 졸-겔법으로 합성하였다. 메조세공 $SnO_2$의 합성 최적조건을 탐사하였으며, 얻어진 시료는 X선회절, 질소흡착 및 투과전자현미경 등으로 분석하여 특성을 조사하였다. 금전극과 백금히터 회로를 알루미나 기재상에 스크린 프린팅 법으로 코팅하고, 합성한 메조세공의 산화주석을 전극상에 접합시켜 하나의 유니트로 구성하였으며, 제작한 센서는 $350^{\circ}C$에서 1~10,000 ppm 농도범위의 메탄과 일산화탄소에 대하여 검지능력을 평가하였다. $SnO_2$ 상에 담지된 팔라듐량의 변화가 이들 측정가스의 검출에 미치는 영향도 검토하였다. 메조세공을 갖는 산화주석은 비다공성의 상용 산화주석에 비하여 동일한 측정 조건하에서 측정가스에 대해 보다 높은 감도를 나타낼 뿐 아니라 안정성이 있으면서도 빠른 응답속도를 보였다.

• 한국축산식품학회지
• /
• 제40권3호
• /
• pp.377-387
• /
• 2020

The aim of this study was to compare the effect of seawater to that of conventional salt (NaCl) on the technological properties of chicken emulsion sausages in a model system. Chicken sausages were prepared with seawater at three levels (10%, 15%, and 20%) in iced water (10%, 5%, and 0%, respectively) or with iced water (20%) and salt (1.2%). There was no difference in pH values and fat loss from emulsion stability between the two treatments. In general, with an increase in the amount of seawater, the water holding capacity (cooking yield and water loss), protein solubility (total and myofibrillar protein), and viscosity were increased. The addition of 20% seawater induced greater (p<0.05) water holding capacity, protein solubility, and viscosity compared to the control sample treated with salt, which was accompanied by an increase in the level of myosin heavy chain protein of samples with 10% and 20% seawater. Furthermore, addition of at least 15% seawater increased all of the main textural properties except for cohesiveness along with the moisture of sausage, whereas the fat and protein contents were decreased. Based on these results, the addition of ≥15% seawater to chicken breast sausage can induce equivalent or enhanced technological properties to those induced with salt, including water holding capacity, protein solubility, viscosity, and textural properties.

• 대한조선학회논문집
• /
• 제50권3호
• /
• pp.175-181
• /
• 2013

This paper presents a simulation for passenger ship evacuation considering the inclination of a ship. In order to describe a passenger's behavior in an evacuation situation, a passenger is modeled as a rigid body which translates in the horizontal plane and rotates along the vertical axis. The position and rotation angle of a passenger are calculated by solving the dynamic equations of motions at each time step. To calculate inclined angle of damaged ship, static equilibrium equations of damaged ship are derived using "added weight method". Using these equations, physical external forces due to the inclination of a ship act on the body of each passenger. The crowd behavior of the passenger is considered as the flock behavior, a form of collective behavior of a large number of interacting passengers with a common group objective. Passengers can also avoid an obstacle due to penalty forces acting on their body. With the passenger model and forces acting on its body, the test problems in International Maritime Organization, Maritime Safety Committee/Circulation 1238(IMO MSC/Circ.1238) are implemented and the effects of ship's inclination on the evacuation time are confirmed.

• 공업화학
• /
• 제29권2호
• /
• pp.168-175
• /
• 2018

본 논문에서는 대나무 섬유(BF)의 화학처리가 BF 및 폴리프로필렌(PP)/대나무섬유(BF) 복합체의 물성에 미치는 영향을 고찰하기 위해, 알칼리 처리 전후의 BF에 대해 ${\gamma}$-aminopropyltriethoxysilane (APS), ${\gamma}$-glycidoxypropyl-trimethoxysilane (GPS) 그리고 ${\gamma}$-mercaptopropyltrimethoxysilane (MRPS)을 이용하여 실란 상용화제를 처리하였다. BF의 화학처리에 따른 형태학적 특성은 광학현미경(OM)과 주사전자현미경(SEM)을 통해 확인하였으며, 화학 구조의 변화는 FT-IR과 EDS를 통해 확인하였다. 실란처리 시 BF의 열안정성이 증가함을 TGA를 통해 확인하였다. 실란 처리한 PP/BF 복합체의 굴곡강도와 충격특성이 개선되는 것을 만능시험기(UTM)와 충격강도시험기(Izod impact test)를 통해 확인하였고, PP/BF 계면 접착특성이 개선되는 것을 인장시험 후 시편의 파단면을 SEM 사진을 통해 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제21권1호
• /
• pp.50-57
• /
• 2010

Stepwise production of syn-gas and hydrogen from methane on ferrite based media added with yttria-stabilized zirconia (YSZ) was carried out using a fixed bed infrared reactor. In this study, all M-ferrite (M=Co, Cu, Mn and Ni) media were prepared by co-precipitation method, and there the YSZ was added as a binder to improve thermal stability, reactivity, and resistance against carbon deposition. Most of the ferrite media containing YSZ showed the good redox property for temperature programmed reduction/oxidation (TPR/O) tests. Notably, the Cu-substituted ferrite medium with YSZ showed the great resistance against carbon deposition as well as the good reactivity for the stepwise production of syngas and hydrogen. Furthermore, it also showed the good durability without significant deactivation during five repeated cyclic tests.

• 대한본초학회지
• /
• 제26권1호
• /
• pp.13-19
• /
• 2011

Objective : This study was to compare antioxidant activity and HPLC pattern analysis from 4 species of changpo(ch$\={a}$ngp$\'{u}$). Methods : To compare the antioxidant activity and HPLC pattern analysis from the 4 species of changpo, we performed the in vitro anti-oxidative activity assays and HPLC analysis from 70% ethanol extracts of Acorus gramineus Sol. (=AG), A. tatarinowii Schott (=AT), A. calamus L. (=AC) and Anemone altaica Fisch. ex C.A.Mey (=AA) taken in the herbal medicine market of Korea. Results : AG has the most effective anti-oxidative activity among 4 species of changpo. As the HPLC pattern analysis, AT was detected the unknown peak at retention time 14.9 min whereas AG was not showed any peak at the same retention time. These results suggest that AG could be used rather than AT when it need to be prescribed as anti-oxidative medicine. Conclusions : This result can be used as the basic data contributing to the stability of AG according to an appropriate clinical application.