• Journal of information and communication convergence engineering
• /
• 제1권2호
• /
• pp.70-73
• /
• 2003

We have studied the effects of solvents and additives in the precursor solutions on the characteristics of barium strontium titanate (BST) thin films. The solution having two solvents, ie. acetic acid for barium acetate and strontium acetate and 2-methoxyethanol for titanium isopropoxide and also having an additive of ethylene glycol shows good stability and remains homogeneous even after a month of ageing. It produces excellent BST thin film without cracks. Dielectric constant, loss tangent at 10KHz and leakage current density at 3V of the BST (70/30) thin film made from this solution are 339, 0.052 and 13.3 ${\mu}\textrm{A}$/$\texmrm{cm}^2$, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.189.1-189.1
• /
• 2013

Titanium dioxide (TiO2) is a wide bandgap semiconductor possessing photochemical stability and thus widely used for photocatalysis. However, enhancing photocatalytic efficiency is still a challenging issue. In general, the efficiency is affected by physio-chemical properties such as crystalline phase, crystallinity, exposed crystal facets, crystallite size, porosity, and surface/bulk defects. Here we propose an alternative approach to enhance the efficiency by studying interfaces between thin TiO2 layers to be stacked; that is, the interfacial phenomena influencing on the formation of porous structures, controlling crystallite sizes and crystallinity. To do so, multi-layered TiO2 thin films were fabricated by using a sol-gel method. Specifically, a single TiO2 thin layer with a thickness range of 20~40 nm was deposited on a silicon wafer and annealed at $600^{\circ}C$. The processing step was repeated up to 6 times. The resulting structures were characterized by conventional electron microscopes, and followed by carrying out photocatalytic performances. The multi-layered TiO2 thin films with enhancing photocatalytic efficiency can be readily applied for bio- and gas sensing devices.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.209-219
• /
• 2018

Colloidally stable organic-inorganic (O-I) hybrid nanoparticles could be prepared using an alkoxysilanefunctionalized amphiphilic polymer (AFAP) precursor. O-I hybrid sols could maintain colloidal stability for six months even at 45% solid content and be coated onto glass as well as PET film to form transparent O-I hybrid films. The formation of O-I hybrid nanoparticles dispersed in cured coating films could be confirmed using scanning electron microscopy. The cured coating film showed 3H and 5H pencil hardness on PET and glass, respectively. Nanoindentation measurements also showed that their modulus and hardness was varied with the type of AFAP used in its preparation.

• 한국멀티미디어학회논문지
• /
• 제22권4호
• /
• pp.417-423
• /
• 2019

This paper presents an evaluation system to determine the completeness of a space map obtained by a visual SLAM(Simultaneous Localization And Mapping) algorithm. The proposed system consists of three parts. First, the proposed system detects the occurrence of loop closing to confirm that users acquired the information from all directions. Thereafter, the acquired map is divided with regular intervals and is verified whether each area has enough map points to successfully estimate users' position. Finally, to check the effectiveness of each map point, the system checks whether the map points are identifiable even at the location where there is a large distance difference from the acquisition position. Experimental results show that space maps whose completeness is proven by the proposed system has higher stability and accuracy in terms of position estimation than other maps that are not proven.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.78-81
• /
• 2012

Colloidal titania nanoparticles were synthesized by a simple sol-gel process. The obtained nanoparticles showed high crystallinity and were of the anatase type. These crystalline colloidal titania nanoparticles were organically modified using methyl- and glycidyl-grafted silanes in order to enhance their stability and solution processability. The stabilized colloidal titania nanoparticles could be dispersed homogeneously without aggregation and converted into silica-titania hybrid films with the heterogeneous Si-O-Ti bonds by a low-temperature solution process. The fabricated silica-titania hybrid films showed high transparency (~ 90%) in the visible range, and low RMS roughness (<1 nm). Therefore, the organosilane-modified crystalline colloidal titania nanoparticles can be used in solution-processable functional coatings for electro-optical devices.

• 한국재료학회지
• /
• 제29권10호
• /
• pp.631-638
• /
• 2019

As automation systems become more common, there is growing interest in functional labeling systems using organic and inorganic hybrid materials. Especially, the demand for thermally and chemically stable labeling paper that can be used in a high temperature environment above $300^{\circ}C$ and a strong acid and base atmosphere is increasing. In this study, a composite coating solution for the development of labeling paper with excellent thermal and chemical stability is prepared by mixing a silica inorganic binder and titanium dioxide. The silica inorganic binder is synthesized using a sol-gel process and mixed with titanium dioxide to improve whiteness at high-temperature. Adhesion between the polyimide substrate and the coating layer is secured and the surface properties of the coating layer, including the thermal and chemical stability, are investigated in detail. The effects of the coating solution dispersion on the surface properties of the coating layer are also analyzed. Finally, it is confirmed that the developed functional labeling paper showed excellent printability.

• Transactions on Electrical and Electronic Materials
• /
• 제16권2호
• /
• pp.86-89
• /
• 2015

Uniform ZrO₂ nanoballs were synthesized at 700℃ using the inverse replication method through a colloid-imprinted carbon (CIC) template. The structural, dielectric, and conducting properties of the ZrO₂ nanoballs were investigated and compared with those of ZrO₂ film prepared by sol-gel method and powdered ZrO₂ chemical. Both the monoclinic and cubic phases were found in the ZrO₂ balls and film but the ZrO₂ chemical showed a monoclinic phase, where the cubic structure is known to be formed at above 2,300℃. ZrO₂ nanoballs showed the lower dielectric property of k = 21.2 at 1 MHz because the 8-coordinated cubic phase in the ZrO₂ nanoball produced lower polarization than the polarization of the 7-coordinated monoclinic ZrO₂ chemical (k = 23.6). The dielectric stability was maintained in each ZrO₂ ball, film, and chemical under the applied forward and reverse voltage range (−5 to +5 V) at 1 MHz. The ionic conductivities were 7.86 × 10⁻⁸/Ω·cm for ZrO₂ nanoballs, 3.29 × 10⁻⁸/Ω·cm for ZrO₂ chemical, and 6.70 × 10⁻⁵/Ω·cm for the thickness of 1,053 nm ZrO₂ film at room temperature with the electronic contribution being less than 0.006%.

• Current Photovoltaic Research
• /
• 제2권4호
• /
• pp.173-176
• /
• 2014

We have investigated the seed layer formation of front side contact using the inkjet printing process. Conductive silver ink was printed on textured Si wafers with 80 nm thick $SiN_x$ anti reflection coating (ARC) layers and thickened by light induced plating (LIP). The inkjet printable sliver inks were specifically formulated for inkjet printing on these substrates. Also, a novel method to prepare nano-sized glass frits by the sol-gel process with particle sizes around 5 nm is presented. Furthermore, dispersion stability of the formulated ink was measured using a Turbiscan. By implementing these glass frits, it was found that a continuous and uniform seed layer with a line width of $40{\mu}m$ could be formed by a inkjet printing process. We also investigated the contact resistance between the front contact and emitter using the transfer length model (TLM). On an emitter with the sheet resistance of $60{\Omega}/sq$, a specific contact resistance (${\rho}_c$) below $10m{\Omega}{\cdot}cm^2$ could be achieved at a peak firing temperature around $700^{\circ}C$. In addition, the correlation between the contact resistance and interface microstructures were studied using scanning electron microscopy (SEM). We found that the added glass particles act as a very effective fire through agent, and Ag crystallites are formed along the interface glass layer.

• 공업화학
• /
• 제28권6호
• /
• pp.626-631
• /
• 2017

투명 플라스틱 소재를 광학용으로 적용하기 위해서는 표면경도 및 내열성과 같은 물성의 개선이 필요하다. 본 연구에서는 이러한 물성의 개선을 위하여 자외선 경화형 유기/무기 하이브리드를 합성하였다. 유기소재 안에 무기 성분이 균일하게 최적상태로 분산되도록 하기 위하여 졸-겔 반응을 기초로 하여 동시에 반응이 진행되도록 하였다. 이러한 졸-겔 반응과 빠른 자외선 경화반응을 적절히 조합하여 우레탄 아크릴레이트 유기소재 안에 무기 성분의 분산성이 향상되도록 하여 투명성이 우수한 코팅층을 형성시킬 수 있었다. 자외선 경화형 유기/무기 하이브리드의 경화도와 코팅 물성을 변화시키기 위하여 다양한 종류의 알콕시 실란을 사용하였다. 이러한 자외선 경화형 유기/무기 하이브리드 코팅에서의 무기 성분의 함량에 따라 표면 경도와 내열성을 조절할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권4호
• /
• pp.1279-1284
• /
• 2012

Silica supported $Cs_{2.5}H_{0.5}PMo_{12}O_{40}$ catalyst was prepared through sol-gel method with ethyl silicate-40 as silicon resource and characterized by X-ray diffraction, infrared spectroscopy, scanning electron microscopy, nitrogen adsorption-desorption and potentiometric titration methods. The $Cs_{2.5}H_{0.5}PMo_{12}O_{40}$ particles with Keggin-type structure well dispersed on the surface of silica, and the catalyst exhibited high surface area and acidity. The catalytic performance of the catalysts for benzene liquid-phase nitration was examined with 65% nitric acid as nitrating agent, and the effects of various parameters were tested, which including temperature, time and amount of catalyst, reactants ratio, especially the recycle of catalyst was emphasized. Benzene was effectively nitrated to mononitro-benzene with high conversion (95%) in optimized conditions. Most importantly, the supported catalyst was proved has excellent stability in the nitration progress, and there were no any other organic solvent and sulfuric acid were used in the reaction system, so the liquid-phase nitration of benzene that we developed was an eco-friendly and attractive alternative for the commercial technology.