• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.5
• /
• pp.59-69
• /
• 2000

Sludge is generated in the process of water and wastewater treatment, and it has been causing various environmental problems. From this point of view, recycling of sludge appears to be the best way. The firing technology in pottery industry is applied to the sludge treatment , and the final product is called artificial soil. The effect of mixed artificial soil with upland soil was investigated through the crop growth experiment and the physical & chemical characteristics of the mixed soils were analyses. After the growth experiment , mixed soil plots contained more CEC, OM, TN, TP than upland soil plots. This result shows that the artificial soil produced form sludge can be mixed with upland soil, and crop can be increased. From the growth analysis, growth of soybean and corn in the mixed soil plots was better than that in the original upland soil plots. Heavy metals contents in the mixed soil plots were within the quality standard. This is a promising result since in most cases heavy metals are the most concern in the application of sludge product to farmland.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.1-11
• /
• 2016

Currently, urban green space is disappearing due to urbanization, industrialization and various environmental problems including the disruption of the ecology in urban areas. To solve such problems and increase urban green area, roof greening has been suggested as an alternative. Through observing the responses of three plant species (Mukdenia rossii, Dianthus chinensis, and Pachysandra terminalis) plantrd on the soil mixed with Geohumus, this study investigated the effect of Gehumus on soil water content and plant survival. Soil water content of the rooftop soils has been increased when mixed with Geohumus. The responses were proportional to the amount of Geohumus in the mixture. Geohumus exerted a stronger influence on raising soil moisture content for soil A which had lower water-holding capacity. The stress responses of the plants varied in relation to the amount of Geohumus and soil moisture content. The stress response was lowest for Dianthus chinensis and increased in the order of Mukdenia rossii and Pachysandra terminalis. With the highest plant stress, Pachysandra terminalis showed the lowest survival rate among the three species. Without irrigation, the plants survived only for six weeks on green roofs. The survival rate differed depending on the amount of Geohumus mixed. The results of the experiment showed, with some exceptions, that Geohumus helped to improve soil water content, reduce plant stress, and extend plant survival period.

• Journal of the Korean Society of Safety
• /
• v.22 no.5
• /
• pp.50-56
• /
• 2007

In the past, a number of approaches, such as analytical, numerical or experimental methods, have been developed to deal with the soil-structure interaction effects. However, for many problems with complex geometry and material discontinuity most of approaches are nearly unpractical since it is difficult to model structures and complicated soil profiles precisely. This paper presents a soil-structure interaction analysis approach, which carl consider precisely characteristics of structures and complicated soil profiles. The presented approach overcomes the difficulties by adopting an unaligned mesh generation approach. From numerical examples, the applicability of the proposed approach is validated and dynamic responses of soil-structure systems subjected to earthquake loading are investigated considering characteristics of structures and complicated soil profiles.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.195-197
• /
• 2003

Soil moisture is a crucial variable in research works of hydrology, meteorology and plant sciences. Adequate soil moisture is essential for plant growth; excesses and deficits of soil moisture must be considered in agricultural practices. There are already several remote sensing methods used for monitoring soil moisture, such as thermal inertia, vegetation water-supplying index, crop water stress index and multi-factor regression. In this paper, an improved method has been discussed which is based on the thermal inertia. We analyzed the problems of monitoring soil moisture using satellites at first, and then put forward an simplified method which directly uses land surface temperature differences to measure soil moisture. Also we have taken the influence of vegetation into account, and import NDVI into the model. The method was used in the study of soil moisture in Heilongjiang Province, China, and we draw the conclusion by the experiments that the model can evidently increase the precision of monitoring soil moisture.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.188-190
• /
• 2001

This study presents procedures and analysis methods for well known two field soil permeability tests, disc-tension infiltrometer and Guelph permeameter. Some case tests are demonstrated and then some problems involving the tests were clarified. This study may be helpful for practical field hydrogeologists.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.2
• /
• pp.81-103
• /
• 1979

The weathered granite soil involves problems in its stability in soil structures depending upon the reduction of soil strength due to the water absorption, crushability, and content of colored mineral and feldspar. As an attemt to solve the problems associated with soil stability, the crushability of weathered granite soil was investigated by conducting tests such as compaction test, CBR test, unconfined compression test, direct shear test, triaxial compression test, and permeability test on the five soil samples different in weathering and mineral compositions. The experimental results are summarized as follows: The ratio of increasing dry density in the weathered granite soil was high as the compaction energy was low, while it was low as the compaction energy was increased. The unconfined compressive strength. and CBR value were highest in the dry side rather than in the soil with the optimum moisture content, when the soil was compacted by adjusting water content. However, the unconfined compressive strength of smples, which were compacted and oven dried, were highest in the wet side rather than in soil with the optimum moisture content. As the soil becomes coarse grain, the ratio of specific surface area increased due to increased crushability, and the increasing ratio of the specific surface area decreased as the compaction energy was increased. The highest ratio of grain crushability was attained in the wet side rather than in the soil with the optimum moisture content. Such tendency was transforming to the dry side as the compaction energy was increased. The effect of water on the grain crushability of soil was high in the coarse grained soil. The specific surface area of WK soil sample, when compacted under the condition of air dried and under the optimum moisture content, was constant regardless of the compaction energy. When the weathered granite soil and river sand with the same grain size were compacted with low compaction energy, the weathered granite soil with crushability had higher dry density than river sand. However, when the compaction energy reached to certain point over limitation, the river sand had higher dry density than the weathered granite soil. The coefficient of permeability was lowest in the wet side rather than in the optimum moisture content, when the soil was compacted by adjusting soil water content. The reduction of permeability of soil due to the compaction was more apparent in the weathered granite soil than in the river sand. The highly significant correlation coefficient was obtained between the amount of particle breakage and dry density of the compacted soil.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5587-5594
• /
• 2012

Determination of the soil-water characteristic curve is one of the most important things to solve geotechnical engineering problems. Expecially, convenient and reliable method to measure the soil-water characteristic curve during drying and wetting cycles is required with lower labor input, more independence from operator experience, and shorter testing time than other available methods. Many measurement methods including the flow pump system have been developed to characterize the soil-water characteristic curve for the several decades. This study measured the soil-water characteristic curve during drying and wetting cycles using a suction control technique with the flow pump system. Two test materials were used for determination of the soil-water characteristic curve, and it is concluded that suction control technique is suitable for determination of the soil-water characteristic curve and characterization of the hydraulic hysteresis with varying test conditions. Especially, the suction control technique can reduce error of measurement and save time in measuring the soil-water characteristic curve due to automated system and high degree of precision.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.1
• /
• pp.65-75
• /
• 2012

Since the modem reinforced soil wall technology was introduced in domestic civil engineering society in the year 1980, the reinforced soil walls have been extensively used because these technologies have advantages such as economical efficiency, graceful appearance, and easy construction. This paper describes the application of reinforced soil wall, design criteria, and construction problems. Many cases of troubles, which include a severe deformation of facing, cracks of facing block, overall sliding failure and so on, have been reported. Inappropriate design and construction management mainly induce these problems. The technological level of design and quantity control for reinforced soil wall is not sufficiently supported to cope with the growth quantity of reinforced soil wall construction market and the increasing number of construction companies. The unified standard design and construction criteria of reinforced soil wall should be established with the detail consideration of overall performance and stability. The quality control of design and construction, and cost of construction must be seriously executed to construct a high quality of reinforced soil wall.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.127-133
• /
• 1999

This paper is a research about system identification which optimizes uncertain geothechnical properties from the data measured during geotechnical design and construction. Various numerical optimization algorithms of Simplex method, Powell method, Rosenbrock method and Levenberg-Marquardt method were applied to the excavation problem to determine which method showed the best results with respect to robustness of success in finding an optimal solution to within a certain accuracy and number of function evaluations. From the results of numerical analysis, all of four algorithms are converged to exact solution after satisfying the allowed criteria, and Levenberg-Marquardt's algorithms was identified to be the most efficient method in number of function evaluations. System identification was applied to geotechnical engineering problems, possibly being occurred in field, to verify its applicability : estimation of settlement due to self-weight consolidation in dredged and filled soil. For self-weight consolidational settlement of a dredged soil, a program of evaluating the constitutive relationship of effective stress-void ratio-permeability was developed by using the technique of system identification. Thus, consolidational characteristics of a dredged soil, having a very high initial void ratio, can be evaluated.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.3
• /
• pp.60-74
• /
• 1980

Soil-cement mixtures involve problems in it's durability in grain size distribution and mineral composition of the used soils as well as in cement content, compaction energy, molding water content, and curing. As an attempt to solve the problems associated with durability of weathered granite soil with cement treated was investigated by conducting tests such as unconfined compression test, it's moisture, immers, wet-dry and freeze-thaw curing, mesurement of loss of weight with wet-dry and freeze-thaw by KS F criteria and CBR test with moisture curing on the five soil samples different in weathering and mineral composition. The experimental results are summarized as follows; The unconfined compressive strength was higher in moisture curing rather than in the immers and wet-dry, while it was lowest in freeze-thaw. Decreasing ratio of unconfined compressive strength in soil-cement mixtures were lowest in optimum moisture content or in the dry side rather than optimum moisture content with freeze-thaw. The highly significant ceofficient was obtained between the cement content and loss of weight with freeze-thaw and wet-dry. It was possible to obtain the durability of soil-cement mixtures, as the materials of base for roads, containing above 4 % of cement content, above 3Okg/cm$_2$ of unconfined compressive trength with seven days moisture curing or 12 cycle of freeze-thaw after it, above 100% of relative unconfined compressive strength, 80% of index of resistance, below 14% of loss of weight with 12 cycle of wet-dry and above 1. 80g/cm$_2$ of dry density.