• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.687-692
• /
• 1997

The barley grown in pot-soil was treated with the NaCl solution of -20 bar in osmotic potential for 10 days, varying the time of treatment: from 20th day before heading; from 10th day before heading and the time of heading. The greatest injury was observed in the case of salt stress at heading or at 10th day before heading: Culm length decreased by 87% : the number of spikes per plant by 82% ; the number of grain per spike by 92% : 1, 000-grain weight by 94% ; yield per pot by 75%. The results also greatly varied depending upon the cultivars and the time of salt stress. Salt stress at the time of heading or at 10th day before heading remarkably decreased yield and yield components. And in terms of grain yield the salt resistance was high in the order of Baegdong, Albori, Hyangmaeg, Olbori and Durubori.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.59-68
• /
• 2007

In this study, evaluation of load capacity and CPT-load capacity parameters were performed using calibration chamber tests for different types of piles including straight-side and tapered piles. Various soil conditions were considered in the investigation, aiming at establishing design procedure for foundation of electronic transmission tower structures. Test results show that no significant difference of total load capacity from straight-side and tapered piles, while individual components of base and shaft load capacities were quite different. Based on the test results, values of CPT-load capacity correlation parameters for different pile types were analyzed for the evaluation of both base and shaft load capacities.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.4
• /
• pp.37-46
• /
• 2008

Application of resilient modulus, representing mechanical behavior of pavement materials, has become general concept for pavement design, analysis and maintenance after '86 AASHTO selected it as a basic input property of subgrade. It is known that resilient modulus of domestic subgrade soil is affected greatly by material factors, such as water content and dry weight unit, and stress components, such as deviatoric stress and confining stress, while effects of loading frequency and loading repeat were regarded negligible. If design based on resilient modulus is to be successfully implemented, design input variables of relevant models should be able to reflect local conditions. In this study, generalized mechanical model for subgrade is proposed. Model parameters are estimated from test results. Verification of the model was performed through finite element analysis using the proposed model, which showed good agreement with measured results of pavement deflections.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.2
• /
• pp.81-97
• /
• 2020

Geopark refers to a single boundary area consisting of a collection of geosites and geotrails, which includes ecological, historical and cultural elements based on geological and geomorphological resources. To ensure the continued development and conservation of existing listed geoparks, it is necessary to carry out an environmental sensitivity analysis of the geopark components by utilizing spatial information from various scales. The objectives of this study are to analyze the environmental sensitivity in Cheongsong UNESCO global geopark in relation with slope disaster using GIS and to understand its spatial distribution in connection with geosites and geotrails. Two types of spatial database were constructed; geosites and geotrails in Cheongsong UNESCO global geopark and spatial data to perform environmental sensitivity. Potential soil loss and slope stability were analyzed to derive environmental sensitivity related to slope hazard. The results showed relatively high environmental sensitivity along the drainage network of Cheongsong UNESCO global geopark. Zonal statistics analysis was conducted for further detailed distribution of environmental sensitivity based on buffer zones of geosites and geotrails. Majority of geological sites, geological trails, Jeolgol gorge~Jusan Pond section in hiking trails, and Dalgi Mineral Spring Site~Artistic Genius Republic of Korea(Jangnankki gonghwaguk) section in road areas show relatively high slope hazard sensitivity within buffer zones.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.97-97
• /
• 2022

The yield characteristics of corn for feed by sowing period and the crude protein, crude fat, and coarse flour contents of grain in the harvesting period were compared. The varieties are Kwangpyeongok(KPO), Dapyeongok(DPO) and Pyeonggangok(PGO), and cultivation was tested by the National Food Engineering Department and the Central Crop Department. It was sown at a planting distance of 70×25cm on April 15, June 14, and July 15, 2021, and the amount of fertilizer was applied through soil inspection. For the growth characteristics, plant height, biomass and grain weight were investigated after 50 days of sowing, and general components were analyzed by drying and pulverizing each seed. Compared to the results of sowing in April, which is the right time to sow corn, all three varieties sown on June 14 showed an increase in biomass. In the case of sowing on July 15, the fresh weight of KPO and DPO decreased, and the grain weight of KPO and PGO decreased by 10-20% compared to the sowing in April. There was no significant difference in the crude protein content of grain according to the sowing seasons in April and June, but decreased in the corn sown in July. The crude fat content was highest in KPO sown on June 14 and DPO sown on July 15. Combining the yield and general composition results, it is thought that the cultivation of corn for feed in Suwon in the central part can be sown by mid-June.

• Journal of Ecology and Environment
• /
• v.47 no.3
• /
• pp.146-156
• /
• 2023

Background: Endemic species are important components in the flora of most world regions. Most of these species have become threatened and exposed to extinction within the last few years. The present study aims to evaluate the ecosystem services offered by the endemic plant taxa in Egypt and the threats that affect them. Twenty-five field visits were conducted during summer 2018 to spring 2022 to several locations all over Egypt. In each location, the main habitats, national distribution, abundance, goods and threats were recorded. Results: Egypt has 41 endemic taxa belonging to 36 genera and 20 families inhabiting 10 main habitats. Rocky surfaces and sandy formations have the highest number of endemic species. The relation between the number of endemic taxa and the abundance categories indicated that 2 taxa are rare (4.9% of the total taxa), while the remaining were very rare (95%). The most represented offered good was the medicinal uses (32 taxa = 78%), while fuel plants were only represented by 2 taxa (2 taxa = 4.9%). Besides, 14 taxa (34.1% of the total studied taxa) have at least 1 environmental service. Soil fertility (7 taxa = 50%) was the most represented, followed by sand accumulations (6 taxa out of 14 taxa = 43%), while shading plant was the least (1 taxon = 7.1%) (Rosa arabica). The most represented threat is over-cutting and over-collecting (38 taxa = 92.7%), while mining and quarrying is the least represented (4 taxa = 9.8%). Conclusions: The potential and actual goods, services and threats of the endemic taxa were assessed as follows; field observation, information collected from local inhabitants and herbalists, and a literature review. The present study recommended planning a strategy about the importance, threats and conservation of endemic taxa in Egypt that would help in the protection and rescue of these plants and increase awareness about the importance of these plants.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.1
• /
• pp.92-100
• /
• 2008

Experimental studies were conducted to identify the active agents for reductive dechlorination of TCE in cement/Fe(II) systems focusing on cement components such as CaO, $Fe_2O_3$, and $Al_2O_3$. A hematite that was used to simulate an $Fe_2O_3$ component in cement was found to have degradation efficiencies (k = 0.641 $day^{-1}$) equivalent to that of cement/Fe(II) systems in the presence of CaO/Fe(II), only when it contained an aluminum impurity$(Al_2O_3)$. When the effect of $Al_2O_3$ content of hematite/CaO/$Al_2O_3$/Fe(II) system was tested, the mole ratio of $Al_2O_3$ to CaO affected the rate of TCE degradation with an optimum ratio around 1 : 10 that resulted in a rate constant of 0.895 $day^{-1}$. In the SEM images of hematite/CaO/$Al_2O_3$/Fe(II) systems, acicular crystals were also found that were also observed in cement/Fe(II) systems. Thus it was suspected that these crystals were reactive reductants and that they might be goethite or ettringite that are known to have acicular structures. An EDS element map analysis revealed that these crystals were not goethite crystals. A subsequent experiment that tested reactivities of compounds formed during the ettringite synthesis showed that ettringite and minerals associated with ettringite formation are not reactive reductants. These observations conclude that a mineral containing CaO and $Al_2O_3$ with a acicular structure could be a major reactive reductant of cement/Fe(II) systems.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.2
• /
• pp.133-140
• /
• 1999

This pot experiment was conducted to find out the forage productivity and quality in a grass/clover sward as affected by the application of three different fertilizers; double superphosphate(DS), fused Mg-phosphate(FP), and complex fertilizer(CF), on newly reclaimed hilly soil. This 1st part was concerned with the forage yields, yield components and botanical composition. The results obtained are summarized as follows: 1. The significant differences in the yields(relative yields, %) of whole forages and legume were laid in the following increasing order; CF(relative yield: 150.4% in whole forages and 169.7% in ladino clover) > FP(125.4% in whole forages and 121.7% in ladino clover) > DS(100.0%). The yield of orchardgrass was significantly reduced in the DS plot, compared with the yields in the FP and CF plots, whereas these showed no significant differences between the FP and CF plots. 2. In the botanicl composition, it showed that the rates of grass : legume were 48:52% in the DS and FP, and 40:60% in the CF. It was recognized that the application of complex fertilizer contributed to the increasing of the yields of whole forages, and especially legume yield and rate in the mixed sward.

• Analytical Science and Technology
• /
• v.23 no.4
• /
• pp.371-382
• /
• 2010

TSP and PM2.5 atmospheric aerosols have been collected at Gosan site of Jeju Island, and their compositions were analyzed to understand the pollution characteristics. The composition ratios of nss (non-sea salt)-$SO_4^{2-}$ and $NH_4^+$ were higher in Gosan site than those in other Korean background and urban sites. However the composition ratio of $NO_3^-$ was conversely lower in Gosan site. From the study of aerosol components according to particle sizes, the anthropogenic nss-$SO_4^{2-}$, $NO_3^-$ and $NH_4^+$ components were mostly existed in the fine particles. But the nss-$Ca^{2+}$, $Na^+$, $Cl^-$ and $Mg^{2+}$ originated from soil and marine sources were distributed relatively in the coarse particles. In the seasonal comparison, the concentrations of nss-$Ca^{2+}$, Al, Fe, Ca and $NO_3^-$ increased in spring season, and nss-$SO_4^{2-}$ showed higher concentration in summer and spring seasons. Based on the factor analysis, the atmospheric aerosols in Gosan site have been found to be influenced largely by anthropogenic sources, and next by marine and soil sources. The backward trajectory analyses showed that the concentrations of nss-$SO_4^{2-}$, $NO_3^-$, Pb and nss-$Ca^{2+}$ increased when the air mass moved from Chinese continent to Jeju area. On the other hand, their concentrations decreased when the air mass moved in from the North Pacific Ocean.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.307-319
• /
• 2016

A Land-Atmosphere Modeling Package (LAMP) for supporting agricultural and forest management was developed at the National Center for AgroMeteorology (NCAM). The package is comprised of two components; one is the Weather Research and Forecasting modeling system (WRF) coupled with Noah-Multiparameterization options (Noah-MP) Land Surface Model (LSM) and the other is an offline one-dimensional LSM. The objective of this paper is to briefly describe the two components of the NCAM-LAMP and to evaluate their initial performance. The coupled WRF/Noah-MP system is configured with a parent domain over East Asia and three nested domains with a finest horizontal grid size of 810 m. The innermost domain covers two Gwangneung deciduous and coniferous KoFlux sites (GDK and GCK). The model is integrated for about 8 days with the initial and boundary conditions taken from the National Centers for Environmental Prediction (NCEP) Final Analysis (FNL) data. The verification variables are 2-m air temperature, 10-m wind, 2-m humidity, and surface precipitation for the WRF/Noah-MP coupled system. Skill scores are calculated for each domain and two dynamic vegetation options using the difference between the observed data from the Korea Meteorological Administration (KMA) and the simulated data from the WRF/Noah-MP coupled system. The accuracy of precipitation simulation is examined using a contingency table that is made up of the Probability of Detection (POD) and the Equitable Threat Score (ETS). The standalone LSM simulation is conducted for one year with the original settings and is compared with the KoFlux site observation for net radiation, sensible heat flux, latent heat flux, and soil moisture variables. According to results, the innermost domain (810 m resolution) among all domains showed the minimum root mean square error for 2-m air temperature, 10-m wind, and 2-m humidity. Turning on the dynamic vegetation had a tendency of reducing 10-m wind simulation errors in all domains. The first nested domain (7,290 m resolution) showed the highest precipitation score, but showed little advantage compared with using the dynamic vegetation. On the other hand, the offline one-dimensional Noah-MP LSM simulation captured the site observed pattern and magnitude of radiative fluxes and soil moisture, and it left room for further improvement through supplementing the model input of leaf area index and finding a proper combination of model physics.