• Journal of the Korea Furniture Society
• /
• v.25 no.3
• /
• pp.233-237
• /
• 2014

The eco-friendly preservatives such as ACQ or CUAZ have been used in landscape architectural facilities these days. In this study, the decay efficacies of ACQ treatments were evaluated according to domestic veneer species, concentration of ACQ, weathering test, adhesive type, and fungus type. In case of veneer species, hinoki cypress and yellow poplar showed the highest and lowest decay resistance, respectively. And the decay resistance appeared to be greater in plywoods bonded by resorcinol resin-bonded plywood and non-weathering treated plywood than polyurethane resin-bonded plywood and weathering treated plywood.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.190-193
• /
• 1982

Conclusion: The results of this study are encouraging for the development of a set of interpretable diagnostic criteria for a reasonably reliable identification of some species. The present study has been limited in the characteristics studied and was made on relatively poor photography. Further study on high quality photography, over wider areas and including such additional characteristics as crown texture and shadow intensity should prove useful. A preliminary examination has been made of some photo-image characteristics of a number of important tree species on large scale (1:9,000) contact prints of panchromatic mm. The characteristics studied were crown image tone, and shape. Image tone was estimated against a standard grey-scale and shows within-species consistency and a range between species. Crown shapes were subjectively assessed but there appears to be a within-species consistency and interpretable between-species differences. The results of this trial suggest that it should be practicable to make a number of important species distinctions by photo-interpretation with a useful degree of reliability. Other characteristics beside those studied might be usefully examined. Photography: Hand-printed glossy contact prints of vertical 1:9,000 scale panchromatic photography of Kwangnung Experimental Forest flown May 1964. The filter used is unknown (probably minus-blue). The camera is unknown but was probably a military type K-17 or K-22 with 6"(apostfophy) lens. The photography shows notably poor resolution. Species: 143 individual trees ranging through 11 species (7 softwood, 4 hardwood) were included in the study. A range of size classes were included for each species.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.4
• /
• pp.61-71
• /
• 2000

The effect of the treatment with CCFZ, FR-4, and PEG400 from butt end on the dimensional stability and bending properties was examined. Three softwood species such as red pine, Korean white pine and Japanese larch and three hardwood species such as poplar, alder and oak were investigated in this research. Shrinkage of red pine, Korean white pine, poplar, and alder treated with PEG400 decreased. However, there was no significant decrease of shrinkage in Japanese larch and oak. The decrease of shrinkage when moisture content changed from about 20% to 10% was larger than that at any other phase. In regard to the effect of treatment on bending properties, bending MOE and MOR of all specimens treated with PEG400 decreased significantly. Especially in the case of red pine, poplar, and alder treated with PEG400, bending MOR reduced 9%, 14%, and 12%, respectively. Reductions of MOR of the hardwood was also much larger than that of the softwood. However, in all species, treatment with CCFZ and FR-4 did not affect the change of bending MOE and MOR significantly. Comparing the large specimen which also included heartwood with the small specimen which included only treated sapwood, there was a difference in the change of bending MOE and MOR between them. The large specimens of Korean white pine, alder and Poplar, which had a relatively low proportion of sapwood(18~22%), showed the decrease of MOR by 11~13% more than that of small specimens, while red pine, Japanese larch and oak, which had a relatively high proportion of sapwood(35~40%), showed little decrease. It means that bending MOE and MOR of structural wood treated from butt end should be considered in terms of sapwood proportion as well as effect of treated chemicals.

• Journal of the Korea Furniture Society
• /
• v.11 no.1
• /
• pp.13-23
• /
• 2000

This study was carried out to investigate the wood properties for development the proper uses of lesser-known tree species. The tested species are Kebambang(Pentace sp.), Bawang-bawang(Dysoxylum alliaceum Bl .), Garu buaya( Gonystylus brunescens A. Shaw)grown in Indonesia. fundamental wood properties such as anatomical, physical, mechanical and chemical properties and characteristics related to wood processing were examined. The results are summarized as follows : The woods of these species are diffuse porous, coarse textured, and interlocked grained. The heartwood of Kebambang is distinguished clearly to the sapwood, but the heartwood of other species are not distinguished clearly to the softwood. The woods of Kebambang and Bawang-bawang have the moderate weight density and the low strength properties, but Garu buaya has the high weight density and the high strength properties. The woods of these species has high shrinkage. The sawing characteristics of Kebambang are excellent but the other species are moderate. The machining characteristics by planer and drying characteristics of these species are moderate. These woods has poor characteristics in bending processing and decay durability. The wood of Bawang-bawang has high content of the extractives and lignin.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.2 s.130
• /
• pp.1-7
• /
• 2005

Tree species of wooden structural members of the Beomeo Temple were identified based on light and scanning electron microscopic characters in the present study. Of 10 structural members, 9 softwoods and 1 hardwood were identified. Among softwood members, 7 belonged to hard pine of the Sylvestris section, and the remaining 2 to hard pine of other than the Sylvestris section and hemlock of the genus Tsuga, respectively. A single hardwood member was identified as white oak of the Prinus section under the subgenus Lepidobalanus.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.34-42
• /
• 1998

Three hardwood (ash, alder and black locust) and three softwood (Japanese red pine, radiata pine and Western hemlock) specimens were dried in microwave(MlW) oven and their drying rates were obtained. Their specific permeabilities were also measured by using a modified liquid permeability measuring device. The correlation between the M/W drying rates and permeabilities of six species were statistically analyzed. It was revealed that within a species there is a logarithmic relationship between the M/W drying rates and average moisture contents and that among species there is a linear relationship between the M/W maximum drying rates and the average specific permeabilities. A exception was Western hemlock, which was of low permeability and of high drying rate. A Me-time equation, which showed a good agreement with the actual data, was derived. Thus using this equation the moisture contents of wood and the drying end points of M/W drying could be predicted. Infrared images of the thermal distribution in wood were illustrated.

• Journal of Conservation Science
• /
• v.5 no.2 s.6
• /
• pp.51-56
• /
• 1996

This paper deals with the restoration of ancient wooden bridge foundation which excavated in Seta river Shiga Prefecture, Japan. Shiga Archeological Research started a marine archeological investigation of the bridge foundation in 1987. The bridge foundation stricture excavated and have since then recovered about a lots of woods and another materials. The bridge foundation structure constructed log, timbers and stones. The species of those waterlogged wood were identified as two types, hardwood and softwood. Hardwood(log : Cyclobalanopsis) was used for below foundation and softwood (timber' Chamaecyparis obtusa Endl. Cupreessaceae) was used for base structure. One of those timber sample dated by dendrochronology, we asked Dr. Misutani*. The softwood gave a felling date of 567 A.D. In result, the ancient Seta bridge foundation structure had constructed between Asuka and Nara period. We healed the news that ancient bridge foundation excavated at Woljyongyo site in Kyongju, Korea 1987. The bridge foundation Setakarahashi is similar in plane and structure to Woljyongyo structures. The Woljyongyo site report had be of value for reference. We had planning to restore those woods. Hardwood log was got serious damage. The water content varies from 400 to $600\%$. The other timbers water content varies about $200\%$. In the Shiga Center for Archaeological Operations and the Azuchi Castle Archaeological Museum, we set up the PEG impregnation tank. Those wooden objects treated by PEG method. PEG with a molecular weight of 4000. The treatment results may be considered satisfactory. The ancient wooden Seta bridge was reconstructed in Biwako Museum which established in Oct. 1996. We must take care of indoor exhibition environments. (*Nara National Cultual Properties Research Institute).

• Journal of the Korea Furniture Society
• /
• v.19 no.3
• /
• pp.156-162
• /
• 2008

Three major domestic softwoods, Korean red pine, Korean pine and larch, were heat-treated at $220^{\circ}C$ and for various treatment times for color changing. A new heat treatment equipment was developed for this study and was revealed working well for changing the colors of the three softwoods. The color difference index of 15 was obtained after 8 hours for Korean red pine and Korean pine, and 10 hours for Larch. The correlations of brightness, redness and yellowness with treatment time were different between species.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.3
• /
• pp.25-32
• /
• 2004

This research work explored physical and mechanical properties of impregnated sawdust boards from three softwood species (P, densifora, L. kaemferi, and P. koraiensis) with phenol-formaldehyde (PF) resin by various vacuum treatment methods of combining pressure, vacuum, and ultrasonic waves. Simultaneous vacuum and ultrasonic wave treatments with no pressure resulted in the greatest increase in resin content, density, dimensional changes (thickness and length), bending strength, and hardness of impregnated board. This result seemed to be attributed to the ultrasonic wave treatment.

• Mycobiology
• /
• v.29 no.4
• /
• pp.205-209
• /
• 2001

The Korean sawmills have recently recognized the importance of prevention of fungal discoloration due to increased losses in revenue. Before establishing integrated control strategies of fungal discoloration, more complete knowledge about causal organisms is needed. As a first step, we initiated a through survey of fungi colonizing commercially important softwood(Pinus dens flora, Pinus koraiensis, and Pinus radiata) logs and lumber in Korea. In this paper we report results obtained from Japanese red pine(Pinus densiflora) log study. In summer 2000, fungi were isolated from Japanese red pine logs in storage, and identified based on their cultural and morphological characteristics. A total of 595 fungi were isolated, representing 21 genera and 30 species. Mold fungi, mostly Trichoderma species, were the most frequently isolating fungi, representing more than half of all isolates. Dematiaceous fungi represented approximately one fifth of the isolates, and Rhinocladiella atorvirens was the most abundant in all samples. Opiostoma species represented 7% of all isolates from cores planted on malt extract agar(MEA) and the incidence of these species doubled with the addition of streptomycin and cycloheximide to MEA. The results indicate that Japanese red pine sapwood is susceptible to colonization by a variety of fungal species. As a result, control strategies that concentrate on one fungus may have limited success because of interference from competing flora.