• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.127-135
• /
• 2016

Cellulose is the most abundant organic polymer constituent of the cell wall of green plants and of various forms of algae. The complexity of lignocellulosic biomass is a major challenge in industrial research. Most mushroom species that naturally grow on soil or wood possess cellulases and the corresponding enzymatic system and, potential candidates for the direct bioconversion of softwood polysaccharides into fermentable sugars. However, there have been fewer studies on mushroom cellulases than on fungi such as Trichoderma spp., exploit the full potential of mushroom cellulases. This review will focus on the current status ofmushroom cellulase research and applications and will provide insight into promising future prospects.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.2
• /
• pp.164-169
• /
• 2000

The reconstituted tobacco leaves(RTL) playa major part in the control of the low density and tar cigarette. Reconstituted tobacco manufactured by the papermaking process has much higher filling power than homogenized tobacco manufactured by slurry and rolling process. Fragile reconstituted tobaccos are liable to lead to small particles detrimental for filling power so they must be properly flexible. This work was conducted to determine the effect of CaCO$_3$ addition in paper-making process on the filling power and the flexibility of the reconstituted tobacco and to obtain the fundamental informations for improving the quality of domestic reconstituted tobacco. We analyzed the wood fiber species, the filler level, the fiber length, the fineness level and observed the surface of the RTL. From the obtained results, we could determine that foreign reconstituted tobacco was manufactured by blending softwood with hardwood and over 8% of calcium carbonate at the addition level. The domestic RTL has much higher fine fiber level by 23.2 % than that of foreign, so the refining treatment process and the condition must be reoptimized for the improvement of RTL quality.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.3
• /
• pp.17-23
• /
• 2003

As a fundamental study of developing sawdust board from thinning softwood logs from three species (Pinus densiflora S. et Z., Larix leptolepis G. and Pinus koraiensis S. et Z.), this study examined the effect of board density and resin content on physical and mechanical properties of sawdust board. As the board density increase, thickness swelling, bending strength, and Brinell hardness increased while water absorption decreased. With increasing the resin content, the bending strength and hardness increased while water absorption and thickness swelling decreased. The board made of L. leptolepis was slightly low in its water absorption, and the one made of P. koraiensis was a little high in its bending strength, while there was no definite difference between each kind of trees in their hardness values.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.1
• /
• pp.8-14
• /
• 1997

Stress wave velocity, wave impedance, and stress wave elasticity of small, clear bending specimens of five domestic softwoods (Pinus densiflora, Pinus koraiensis, Chamaecyparis obtusa, Cryptomeria japonica, and Larix leptolepis) and four tropical hardwoods(Kempas, Malas, Taun, and Terminalia) were correlated with static bending modulus of elasticity(MOE) and modulus of rupture(MOR). The degree of correlation between stress wave parameters and static bending properties was dependent on wood species tested. Stress wave elasticity and wave impedance were better predictors for static bending properties than stress wave velocity for each species individually and for softwood or hardwood species taken as a group, even though elasticity and impedance were nearly equally correlated with static bending properties apparently. Based upon the correlation coefficient between stress wave parameters and static properties, stress wave elasticity and wave impedance were found as stress wave parameters which can be used for the purpose of the reliable and successful prediction of bending properties. The degree of correlation between static MOE and MOR was also different according to wood species tested. Static MOE was nearly as well correlated with MOR as was stress wave elasticity. The results of this research are encouraging and can be considered as a basis for further work using full-size lumber. From the results of this study, it was concluded that stress wave measurements could provide useful predictions of static bending properties and was a feasible method for machine stress grading of domestic softwoods and tropical hardwoods tested in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.4 s.132
• /
• pp.1-8
• /
• 2005

The initiation and cessation of cambial activities were investigated to find out the growth characteristics of the major species growing in Chuncheon, Korea. The division of cambial zone in Pinus densiflora and Pinus koraiensis began from the middle of March through the end of March. The activity of cambial zone in P. densiflora and P. koraiensis was vigorous from the end of May through the middle of July. During this period the number of cells increased rapidly in radial direction. However, the number of cells in P. densiflora was gradually increased. The division of cambial zone in ring-porous wood, such as Quercus mongolica and Robinia pseudoacacia began in the middle of March, before the formation of vessel. The division of cambial zone in diffuse-porous wood, such as Cornus controversa and Prunus sargentii, began in early April, and then the formation of vessels began after one to three weeks. It was considered that the cambial zone in softwood was ceased from the beginning of November, whereas cambial activities in hardwood ceased in the middle of October. Consequently, the formation of growth ring was different among the species, even though the trees were grown under the same conditions.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.6
• /
• pp.153-163
• /
• 2009

This study was carried out to offer ecological restoration plan of local streams by analyzing the vegetation and flora around four local streams (Pungchoncheon, Namchangcheon, Ganggicheon, Woncheoncheon) in Namwon. Flora and vegetation investigation was done at April 2007 to August 2007, and June 2009. The 194 of vascular plants were identified which contain 53 families, 143 genera, 194 species. The Family frequencies arranged by the order of Family Compositae (14.4%), Family Gramineae (13.4%) Family Leguminosae (6.7%) and Family Polygonaceae (5.2%). The naturalized plants were listed as 33 species, and their naturalization ratio and urban index were found to be 17.0%, and 12.2%, respectively. In this study a total of 21 relev$\acute{e}$s collected and analyzed. 6 plant communities are differentiated : Riverine softwood forests (Phragmites japonica-Salix gracilistyla community), Perennial herb vegetations on lotic water zone (Phragmites japonica community, Phalaris arundinacea community), Perennial herb vegetations on lentic water zone (Persicaria thunbergii-Typha orientalis community, Phragmites communis community), Annual or biennial vegetations on waterside (Persicaria thunbergii community). Species showing the higer value in the plant communities were Persicaria thunbergii, Phragmites japonica, Artemisia princeps, Humulus scandens, Bidens frondosa, Oenanthe javanica, Agropyron tsukusinense var. transiens, Stellaria aquatica, and Lactuca indica var. laciniata.

• Journal of Korean Society on Water Environment
• /
• v.32 no.2
• /
• pp.205-215
• /
• 2016

In order to improve water quality in the Paldang Lake, a riparian vegetation belt, treatment wetland, and artificial floating island were designed for introduction in the upland field, the estuary of tributaries, and the section of water facing mountainous land, respectively. We synthesized vegetation information collected from a reference river and found that herbaceous, shrubby, and tree vegetation zones tended to be dominated by Phragmites japonica, Phalaris arundinacea, etc.; Salix gracilistyla, S. integra, etc.; and S. koreensis, S. subfragilis, and Morus alba, respectively. In our plan, the herbaceous vegetation zone, which is established on floodplains with a high frequency of disturbance, will be left in its natural state. A shrubby vegetation zone will be created by imitating the species composition of the reference river in the ecotone between floodplain and embankment. A tree vegetation zone will be created by imitating species composition on the embankment slope. In the treatment wetland, we plan to create emerged and softwood plant zones by imitating the species composition of the Zizania latifolia community, the Typha orientalis community, the P. communis community, the S. integra community, and the S. koreensis community. The floating island will be created by restoring Z. latifolia and T. orientalis for water purification purposes.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.6
• /
• pp.574-590
• /
• 2021

International efforts to prevent illegally logged wood are expanding around the world. The "Legal Wood Trade Promotion System" was enacted in Korea in 2019 to strengthen the legal import and distribution of commercial wood in Korea. Since then, this system has promoted and ensured that the imported wood and wood products are legal with respect to the country of origin, wood species, and harvested area. As verification methods, DNA analysis technology and anatomical analysis using a microscope are mainly used in conjunction. Therefore, in this study, wood species of plywood were identified by analyzing the anatomical characteristics of various wood products for the first time. Douglas fir (Pseudotsuga menziesii (Mirb.) Franco.) and larch (Larix kaempferi (Lamb.) Carriere) plywoods (7, 9 ply) were obtained from four companies that supply plywood in Korea. After cutting each company's plywood to a size of about 1 cm³, the layers from top to bottom were separated into single layers, and three sections were observed using an optical microscope. The results revealed that the plywood was composed of a mixture of softwood and hardwood wood species, pine wood species, poplar wood species, or a mixture of larch and pine wood species. Identification of wood species using microscopy is important and can enable the scientific analysis and verification of various wood products, including plywood, imported from countries where the likelihood of indiscriminate distribution of illegal wood and illegal logging is high.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.111-119
• /
• 2018

This study was carried out to investigate the growth characteristics and propagation methods of the Korean native Amelanchier asiatica, A. arborea, and A. alnifolia as fruit trees for gardens. Due to the lack of recent research on Amelanchier spp., their superficial classification is still unclear and the names are being used interchangeably. The results are obtained as follows : A. arborea and A. alnifolia were globular type multi-stemmed shrubs. A 20-year-old tree of A. asiatica was 7.8m in height, with a 5.2m crown width, with one trunk. As for the morphological characteristics, leaves of A. asiatica were oblong, with an acuminate of, 6.1cm and 3.6cm width, but A. arborea and A. alnifolia had acute obovate leaves. The leaf size of A. alnifolia was the largest among the three species. The flower size of A. asiatica was bigger than that of A. arborea and A. alnifolia. In addition, its petals and flower clusters were also the largest among the three species. The flowering of A. asiatica initiated on April 21 and then bloomed for a duration of 24 days in Osan, while that of A. arborea and A. alnifolia initiated flowering on April 12 and then bloomed for a duration of 22 days in the same location. The fruit of A. arborea and A. alnifolia were green on May 10~12, it changed into purplish red on May 24~26, and its matured on June 1~3. The duration of fruit persistence of A. arborea and A. alnifolia were 48~50 days. On the other hand, A. asiatica showed greenish fruit on May 20, it became red on September 4, and had fallen by October 3. The fruit size was the largest at 1.03cm of height and 1.12cm of diameter in the A. arborea, followed by the big berry of A. alnifolia and the smallest fruit in the native, A. asiatica. It was difficult to root due to the hardwood cutting of A. arborea at a 40% rate of rooting. In the softwood cutting, the rooting rate of A. arborea was increased by the treatment with concentrated IBA, especially at 5,000 and 7,000ppm. The optimum date for cutting was on June 27, when the rooting rate was more than 80%. The most effective method for rooting of A. arborea was rootone or 7,000 ppm IBA treatment on June 27 softwood cuttings, which showed a rooting rate of over 80%.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.1
• /
• pp.11-30
• /
• 1984

This study was executed to offer the basical data needed to the plywood industry as examining on the wood characteristics of veneer species that grow in Korea. According to the aggravation of log import from foreign countries caused by the gradual exhaustion of wood resources in recent years, the study on wood characteristics of veneer species growing in Korea should be carried out preferentially in promotion of the domestic timber utilization and development of it's processing technique for plywood industry. 50 commercial veneer species in this study were selected from 33 genuses, and general macroseopical wood characteristics for them were examined and described by the species. And also keys for the identification based on gross features were briefly prepared and presented by gymnosperm and angiosperm respectively.