• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.215-218
• /
• 2002

In this paper, a dual-frequency printed slot antenna loaded with an open-ring conducting strip and capacitively fed by a coplanar waveguide(CPW) is designed. The designed antenna has a bandwidth of 240㎒(1690㎒-1930㎒) at PCS frequency band and of 160㎒(2380㎒-2540㎒) at WLAN frequency band. In both frequency ranges, pattern and gain requirements are satisfied. The commercial software, IE3D, was used to design slot antenna. The predicted characteristics along with measured data are presented for verification purpose.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.893-900
• /
• 2004

This paper is to define the method that develops the software In proper to application areas of Geographic Information Systems and design patterns according to functions and roles that implement the system for safety evaluation of the groundwater well based on an object oriented spatial model. In order to design the user interface of the groundwater well, this paper proposes the framework that should classify only requisite components adaptable to various application areas. By specifying De pattern appropriate to the application domain and designing the analysis pattern using the UML based on the object oriented methodology. this paper shah contribute to enhance the reuse of components that can develop and distribute a .large scale open system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.631-636
• /
• 2009

This paper presents design and analysis of ultrasonic vibrator featuring the piezoelectric actuator. After describing a geometric configuration of the proposed vibrator, an analytical model of the ultrasonic vibrator is formulated by adopting liquid film pattern theory and wave theory. The dynamic analysis and geometric optimization are then undertaken using a software ANSYS. The optimization is performed by taking the amplitude of the tip displacement as an objective function. The fluid flow characteristics of the proposed vibrator are analyzed by taking three different fluids: water, silicon oil and ethylene-glycol. This is achieved using a software FLUENT.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.12
• /
• pp.1289-1295
• /
• 2009

This paper presents design and analysis of ultrasonic vibrator featuring the piezoelectric actuator. After describing a geometric configuration of the proposed vibrator, an analytical model of the ultrasonic vibrator is formulated by adopting liquid film pattern theory and wave theory. The dynamic analysis and geometric optimization are then undertaken using a software ANSYS. The optimization is performed by taking the amplitude of the tip displacement as an objective function. The fluid flow characteristics of the proposed vibrator are analyzed by taking three different fluids: water, silicon oil and ethylene-glycol. This is achieved using a software FLUENT.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.295-296
• /
• 2017

본 논문에서는 과거 절차 지향적으로 개발 된 함정 전투체계을 표준화 된 새로운 전투체계 소프트웨어로 변화 시키는 방안을 제안한다. 최근 전투체계 소프트웨어는 새로운 장비의 추가와 기능 변경으로 수정이 빈번이 일어나고 있다. 이러한 확장성관련문제를 해결하기 위해 본 논문에서는 객체 지향 프로그래밍 및 디자인 패턴을 사용하여 전투체계 소프트웨어를 확장성과 유지보유성이 우수한 소프트웨어로 변경하는 방법을 연구하고 실제로 전투체계 소프트웨어 중 교전 모듈에 적용하는 과정을 보여준다. 그리고 함정전투체계에 이러한 표준화를 적용할 경우 어떠한 효용성이 있는지에 대하여 알아본다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.943-950
• /
• 2010

A secure entrance system is complicated because it should have various functions like monitoring, logging, tracing, authentication, authorization, staff locating, managing staff enter-and-leave, and gate control. In this paper, we built and applied a secure entrance system for a domestic nuclear plant using Aspect Oriented Programming(AOP) and design pattern. Using AOP has an advantage of clearly distinguishing the role for each functional module because building a system separated independently from the system's business logic and security logic is possible. It can manage system alternation flexibility by frequent change of external environment, building a more flexible system based on increased code reuse, efficient functioning is possible which is an original advantage of AOP. Using design pattern enables to design by structuring the complicated problems that arise in general software development. Therefore, the safety of the system can also be guaranteed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.158-163
• /
• 2023

Recently, the global demands for high voltage power semiconductors are increasing across various industrial fields. The use of electric cars with high safety and convenience is becoming practical, and IGBT modules of 3.3 kV and 1.2 kA or higher are used for electric locomotives. Delicate design and advanced process technology are required, and research on the optimization of high-voltage IGBT parts is urgently needed in the industry. In this study, we attempted to design a simulation process through TCAD (technology computer-aid design) software to optimize the process conditions of the fielding process among the core unit processes for an especial high yield voltage. As well, the prior circuit technology design and a ring pattern with a large number of ring formation structures outside the wafer similar to the chip structure of other companies were constructed for 3.3 kV NPT-IGBT through a unit process demonstration experiment. The ring pattern was designed with 21 rings and the width of the ring was 6.6 ㎛. By changing the spacing between patterns from 17.4 ㎛ to 35.4 ㎛, it was possible to optimize the spacing from 19.2 ㎛ to 18.4 ㎛.

• Transactions of Materials Processing
• /
• v.25 no.5
• /
• pp.319-324
• /
• 2016

Recently, the roll forming process is one of the most widely used processes for manufacturing automotive part. In this study, flower patterns of roll forming process were designed to manufacture an ultra high strength bumper beam using the finite element analysis. Three types of flower patterns such as the basic type, the rotation type and the split type were designed based on the constant arc length forming method using the design software, UBECO Profil. Finite element analysis was performed to evaluate the suitability of designed flower patterns in terms of the longitudinal strain and the bow defect. The analytical results show that the split type represents more uniform longitudinal strain distributions and a good dimensional accuracy than other types of flower patterns.

• Genomics & Informatics
• /
• v.6 no.1
• /
• pp.50-53
• /
• 2008

We have released five Java Application Programming Interface (API) packages for viewing three-dimensional structures of proteins from the Protein Data Bank. To this end, the user interface of an earlier version has been refactored in an object-oriented fashion, in which refactoring is the process of changing a software system to improve its internal structure, without altering the external behavior. Various GUI design and features have been provided conveniently thanks to the Model-View-Control (MVC) model, which is an architectural pattern used in software engineering. Availability: The source code and API specification can be downloaded from https://sourceforge.net/projects/j3dpsv/.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.63-74
• /
• 2004

This study shows that clothes to be just the same as the real thing can be Produced through the third dimension computer graphics, and then presents that not only the area of fashion design can be expanded in the virtual reality field by doing the simulation of the fashion show, but also the information can be made the real time public ownership and the communication can be fulfilled smoothly. In this study, analyzing the third dimension computer graphic programs to be used much at present, Alias Wavefront Company's Maya software which was the most effective in the clothes simulation and the clothes CAD SGS OptiTex 8.7 which went well substitutive for it were used of them. The conclusions of this study that got through the work manufacture are as follows： The first, if the file manufacturing in the clothes CAD by using the computer was stored, the pattern used 3D simulation was available because it could be summoned in 3D software. The second, if the data of DXF form in Maya program was summoned, they could not be applied by Maya Cloth supported in Nurbs only because they were recognized as the DXF＿layer. So the curve along the outer lines of the pattern was drawn and Maya Cloth was applied to be possible to get the natural silhouette of clothes. The third, when the clothes were manufactured by 3D, if the draping character was applied according to the textile special quality, not only the control of textile's thickness, weight, quality feeling, and silhouette was available, but also the clothes were available to graft the special textile materials. The fourth, the natural motion of model was produced by capturing the actual model's walking action In order to produce the fashion show motion and also the dynamic fashion show was available by the angle of camera, the establishment of lighting, and etc. in the final rendering. The clothes manufactured by 3D are available to change the design by changing the materials, or by adding the details, or by utilizing the special materials on clothes. Therefore, the trial and error following at the clothes manufacture can be reduced. But the elevation of the rendering speed, the price down, the strengthening of personal security, and etc. are required.