• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.462-468
• /
• 2022

The selection and effective utilization of peak-fitting software for conventional gamma-ray spectrum analysis is significant for accurate determination of the mass fraction of elements, particularly in complex peak regions. Majority of the peak-fitting programs can derive similar peak characteristics for singlet peaks, but very few programs can deconvolute multi-peaks in a complex region. The deconvolution of multi-peaks requires special peak-fitting functions, such as left and right-skew distributions. In the this study, 843.76 keV (²⁷Mg) peak area from the complex region (840 keV-850 keV) determined and compared using four different peak-fitting programs, namely, GammaVision, Genie2000, HyperLab, and HyperGam. The 843.76 keV peak interfered with 841.63 keV (^152mEu) and 846.81 keV (⁵⁶Mn). The total Mg concentration was determined through k₀-instrumental neutron activation analysis by applying the isotopic interference correction factor ²⁷Al(n,p)²⁷Mg through the simultaneous determination of Al concentration. HyperLab and HyperGam peak-fitting programs reported consistent peak areas, and resultant concentrations agreed with the certified values of matrix-certified reference materials.

• Korean Journal of Geomatics
• /
• v.5 no.1
• /
• pp.43-49
• /
• 2005

It is well known that GPS technique can be used for high accuracy leveling positioning if a precise geoid model is available to use at a surveying point. In this study, KOGD2003 geoid model was developed in and around Korean peninsula and this geoid model could be achieved by combining GPS/leveling data with the formerly developed KOGD2002. To this end, the software for orthometric height obtaining and geodetic datum transformation has been implemented with the visual C++ language, what we called GPS-GeoL v.1.0. In order to evaluate the performance and the accuracy of the software, GPS field tests were carried out in the Korean second-order leveling network over Chollabukdo area. Results of the tests have shown that the mean value of the differences between outputs of the software developed in this research and officially announced orthometric heights by NGII (National Geographic Information Institute) was 0.0221 m and also those of RMS was 0.0332 m. Therefore, it was possible to conclude that the KOGD2003 and GPS-GeoL v.1.0 software could be used to determine orthometric heights for civil construction field applications with cm-level accuracy.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.9
• /
• pp.1146-1151
• /
• 2018

Recently, researches on the intelligence of electric power facilities have been trying to apply artificial intelligence techniques as computer platforms have improved. In particular, faults occurring in substation should be able to quickly identify possible faults and minimize power fault recovery time. This paper presents fault location technique for 154kV substation using neural network. We constructed a training matrix based on the operating conditions of the circuit breaker and IED to identify the fault location of each component of the target 154kV substation, such as line, bus, and transformer. After performing the training to identify the fault location by the neural network using Weka software, the performance of fault location discrimination of the designed neural network was confirmed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.239-245
• /
• 2019

RISC-V is a free and open ISA enabling a new era of processor innovation through open standard collaboration. Born in academia and research, RISC-V ISA delivers a new level of free, extensible software and hardware freedom on architecture, paving the way for the next 50 years of computing design and innovation. In this paper, according to the emergence of RISC-V architecture, we describe the RISC-V processor instruction set constituted by arithmetic logic, memory, branch, control, status register, environment call and break point instructions. Using ModelSim and Quartus-II, 38 instructions of RISC-V has been successfully simulated and synthesized.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.359-361
• /
• 2015

통신 미들웨어는 통신 개체들간의 연동 시뮬레이션 및 대규모 통신을 목적으로 개발되었으며 이는 국방용 대규모 시뮬레이션인 L-V-C(Live-Virtual-Constructive) 연동에 사용된다. L-V-C 연동을 위해서 L 체계에서 사용하는 미들웨어인 DDS와 V-C 체계에서 사용하는 미들웨어인 RTI의 연동을 하여 이기종간 미들웨어 연동을 구현하였다. 각 미들웨어들은 통신 품질을 보장하기 위해서 QoS(Quality of Service) 기능을 제공한다. 이종 미들웨어의 연동 시 상호간의 통신 품질을 유지하기 위해서 미들웨어간의 QoS 호환이 필요하다. 이를 위하여 각 미들웨어간 QoS 설정을 비교하였으며, 이를 구현하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2021.06a
• /
• pp.78-80
• /
• 2021

In this paper, we proposed an improved method on the picture order of coding (POC) of MPEG-5 Essential video Coding (EVC) encoder to support a short intra period for Video-based Point Cloud Compression (V-PCC). As a codec-agnostically designed standard, V-PCC claimed to be able to work with a lot of codecs. Current EVC test model software shows that the baseline profile could not provide appropriate POC calculation. The proposed method offers a solution to this POC-related problem and provides up to 44.6% coding grains for EVC based V-PCC.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.102.2-102
• /
• 2001

• Journal of Internet Computing and Services
• /
• v.22 no.3
• /
• pp.37-43
• /
• 2021

In this paper, we study how objects from front and back cameras can be recognized in real time in a mobile environment to segment regions of object pixels and synthesize them through image processing. To this work, we applied DeepLabV3 machine learning model to dual cameras provided by Apple's iOS. We also propose methods using Core Image and Core Graphics libraries from Apple for image synthesis and postprocessing. Furthermore, we improved CPU usage than previous works and compared the throughput rates and results of Depth and DeepLabV3. Finally, We also developed a camera application using these two methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.395-398
• /
• 2018

we propose a design method and process for hardware and software of hybrid V2X communication systems that support both C-ITS communication protocol and Legacy LTE communication technology. The hybrid V2X communication systems support multiple communication technologies of WAVE and LTE, in which WAVE supports multiple channels, so that it is designed to transmit road information such as LDM and positioning correction information to an autonomous vehicle in real time.

• Structural Engineering and Mechanics
• /
• v.87 no.6
• /
• pp.601-614
• /
• 2023

In this study, the uniaxial ratcheting effect of Z2CND18.12N austenitic stainless steel at room and elevated temperatures is firstly simulated based on the Ahmadzadeh-Varvani hardening rule (A-V model), which is embedded into the finite element software ABAQUS by writing the user material subroutine UMAT. The results show that the predicted results of A-V model are lower than the experimental data, and the A-V model is difficult to control ratcheting strain rate. In order to improve the predictive ability of the A-V model, the parameter γ2 of the A-V model is modified using the isotropic hardening criterion, and the extended A-V model is proposed. Comparing the predicted results of the above two models with the experimental data, it is shown that the prediction results of the extended A-V model are in good agreement with the experimental data.