• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1121-1121
• /
• 2001

A previous study (Berzaghi et al., 2001) evaluated the performance of 3 calibration methods, modified partial least squares (MPLS), local PLS (LOCAL) and artificial neural networks (ANN) on the prediction of the chemical composition of forages, using a large NIR database. The study used forage samples (n=25,977) from Australia, Europe (Belgium, Germany, Italy and Sweden) and North America (Canada and U.S.A) with reference values for moisture, crude protein and neutral detergent fibre content. The spectra of the samples were collected using 10 different Foss NIR Systems instruments, only some of which had been standardized to one master instrument. The aim of the present study was to evaluate the behaviour of these different calibration methods when predicting the same samples measured on different instruments. Twenty-two sealed samples of different kind of forages were measured in duplicate on seven instruments (one master and six slaves). Three sets of near infrared spectra (1100 to 2500nm) were created. The first set consisted of the spectra in their original form (unstandardized); the second set was created using a single sample standardization (Clone1); the third was created using a multiple sample procedure (Clone6). WinISI software (Infrasoft International Inc., Port Mathilda, PA, USA) was used to perform both types of standardization, Clone1 is just a photometric offset between a “master” instrument and the “slave” instrument. Clone6 modifies both the X-axis through a wavelength adjustment and the Y-axis through a simple regression wavelength by wavelength. The Clone1 procedure used one sample spectrally close to the centre of the population. The six samples used in Clone 6 were selected to cover the range of spectral variation in the sample set. The remaining fifteen samples were used to evaluate the performances of the different models. The predicted values for dry matter, protein and neutral detergent fibre from the master Instrument were considered as “reference Y values” when computing the statistics RMSEP, SEPC, R, Bias, Slope, mean GH (global Mahalanobis distance) and mean NH (neighbourhood Mahalanobis distance) for the 6 slave instruments. From the results we conclude that i) all the calibration techniques gave satisfactory results after standardization. Without standardization the predicted data from the slaves would have required slope and bias correction to produce acceptable statistics. ii) Standardization reduced the errors for all calibration methods and parameters tested, reducing not only systematic biases but also random errors. iii) Standardization removed slope effects that were significantly different from 1.0 in most of the cases. iv) Clone1 and Clone6 gave similar results except for NDF where Clone6 gave better RMSEP values than Clone1. v) GH and NH were reduced by half even with very large data sets including unstandardized spectra.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.40-48
• /
• 1999

This study was designed to examine the specificities of the designed primers for F. nucleatum and F. necrophorum and to compare the PCR results using clinical samples with those of the anaerobic culture method. F. nucleatum and F. necrophorum spp. are frequently isolated in infected root canals, and they are related to periapical diseases. F. nucleatum(VPI 10197) and F. necrophorum(ATCC 25286) were used as references for PCR reaction, and thirty five teeth with one canal and periapical lesion were used. The samples were cultured anaerobically and identified using Rapid ID 32A(BioMerieux Vitek, Inc., France) as biochemical battery. In the GenBank database, species-specific PCR primers(nuc1/nuc2 primers for F. nucleatum and nec1/nec2 primers for F. necrophorum) were designed from the 16S ribosomal DNA(rDNA) sequences of F. nucleatum(accession number M58683) and F. necrophorum(accession number AF044948). PCR procedures of F. nucleatum(VPI 10197) and F. necrophorum (ATCC 25286) were simulated on a computer software. Amplify(v.1.2${\beta}$ for Macintosh). 820 bps and 817 bps of nucleotides were expected, respectively. Using extracted DNAs with QiaAmp tissue kit(Qiagen co., Germany), PCR was done. The results were as follows : 1. The nuc1/nuc2 primers produced an amplicon of 820 bps and the nec1/nec2 primers produced an amplicon of 817 bps. 2. The nuc1/nuc2 primers and the nec1/nec2 primers were specific and did not react with species other than the designated ones(i.e. nuc1/nuc2 primers did not produce amplicons for F. necrophorum, and vice versa.). And the PCR products of Porphyromonas endodontalis(ATCC 35406), Porphyromonas gingivalis(ATCC 33277), Prevotella intermedia(ATCC 25611), and Prevotella nigrescens(ATCC 33563), frequently isolated in infected root canals and periapical lesions, were not amplified by the primers specific for Fusobacterium nucleatum and Fusobacterium necrophorum. 3. This method utilizing PCR could detect F. nucleatum and F. necrophorum in clinical samples, while anaerobic culture method could detect neither.

• Journal of Internet of Things and Convergence
• /
• v.4 no.2
• /
• pp.21-28
• /
• 2018

I investigated that ALK receptor tyrosine kinase (ALK) gene polymorphisms were contributed to susceptibility to ICH in Korean population. I recruited 156 ICH patients and 425 healthy controls for this study, respectively. rs1881421, rs1881420, rs3795850, and rs2246745 single nucleotide polymorphisms (SNPs) were genotyped. The genotype and allele distributions of tested four SNPs was analyzed using the SNPStats, SPSS 22.0, and the Haploview v.4.2 software. The Odd's ratios (OR), 95% confidence intervals (CI), and P values were calculated in allele and genotype models. I found that rs1881421, rs1881420, rs3795850, and rs2246745 SNPs of ALK gene (rs1881421, OR=2.02, 95% CI=1.54-2.64, p<0.001; rs1881420, OR=0.53, 95% CI=1.16-2.01, p=0.003; rs3795850, OR=1.54, 95% CI=1.17-2.02, p=0.002; rs2246745, OR=1.95, 95% CI=1.46-2.60, p<0.001 in each allele analysis). And distributions of CC, GT, and GC haplotypes between the ICH group and the control group also showed significant association with ICH (CC haplotype, p<0.001; GT haplotype, p=0.006; GC haplotype, p<0.001). These minor alleles of tested four SNPs in ALK gene were contributed to increased risk of development for ICH. Our findings suggested that the ALK gene may be a risk factor for susceptibility to ICH.The Korea Internet of Things Society.

• Quality Improvement in Health Care
• /
• v.8 no.2
• /
• pp.208-217
• /
• 2001

Background : The objective of this study is proving the basic data for developing a management system for the discharges against medical advice(AMA) by identifying the characteristics of the AMA patients of an university hospital for 10 years. Methods : By using discharge abstract data base, we divided the total discharges(435,254) into two groups, discharge against medical advice and discharge with discharge order. We confirmed the characteristics of AMA group by analyzing discharge abstract data of the both groups by SAS software V6.12 and $x^2$ test. Medical records of AMA patients in the year 2000 were reviewed to identify the reasons for AMA which we couldn't extract from discharge abstract DB. Result : The total number of AMA for 10 years were 9,358(2.15%) and the AMA rate has been continuously decreased for 10 years. Male, admission through emergency room, discharges admission via other hospital, patients without operation during hospitalization, discharges in hopeless or not improved condition showed higher AMA rate. The AMA rate was higher as the age of the patients was higher, and the average length of stay was longer in AMA patients than in those with discharge order. The AMA rate in psychiatry was highest(14.3%) and it was higher in surgery departments than those of medical or other sections. The AMA rate varied by attending physicians even in the same department and it was statistically significant. Patients with the principal diagnosis of "medical observation and evaluation for suspected diseases" showed the highest AMA rate(15.5%), and that of schizophrenia or psychosis was the nest. One hundred twenty-one patients(19.5%) out of 622 AMA in 2000 discharged against medical advice for transfer to order health care facilities. Among them 71 patients(58.7%) discharged with their medical care information, such as copies of medical record, medical certificates, summaries, etc. Written oath of the patients discharged AMA was filed in their medical records in 466 cases(74.9%) although some of them were incomplete. Conclusion : Characteristics of AMA discharge could be used as the basic data in developing a system to manage the patients who have risk factors to leave the hospital against medical advice. By reducing number of patients leaving the hospital against medical advice we can increase satisfaction of medical providers and consumers.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.20-29
• /
• 2006

Modeling urban climate caused by land use conversion is critical for human welfare and sustainable development, but has hampered because detailed information on urban characteristics is hard to obtain. With the advantage of satellite observations and the new statistical boundary system, this paper measures the economic and environmental effects of green area loss due to land use conversion in urban areas. To perform this purpose, data were collected from the various sources basic statistical unit data from the National Statistical Office, digital maps from the National Geographic Information Institute, satellite images, and field surveys when necessary. All data (maps and attributes) are built into the geographic information system (GIS). This paper also utilizes Landsat TM 5 imagery of Daegu city to derive vegetation index and to measure average surface temperature. The satellite data were examined using standard image processing software, ERDAS IMAGINE, and the results of the digital processing were presented with ARCVIEW(v.3.3). SAS package was used to perform statistical analyses. This study presents that there exists a strong relationship between land use change and climatic change as well as land price change. Based on results of the analysis, this paper suggests that planners should implement effective tools and policies of urban growth management to detect environmental quality and to make right decisions on policies concerning smart urban growth.

• Journal of Radiation Protection and Research
• /
• v.37 no.1
• /
• pp.10-15
• /
• 2012

Design and performance test results of a newly developed optically stimulated luminescence (OSL) measurement system are presented in this paper. Generally, different types of optical filters are used in OSL reader system to minimize the interference of the stimulation light in the OSL signal. For optically stimulation of $Al_2O_3:C$, we have arrived at an optimal combination of the filters, i.e., GG420 filter for filtering the stimulating light source, and a combined UG11 and BG39 filter at the detecting window (PMT). By using a high luminance blue LED (Luxeon V), sufficient luminous intensity could be obtained for optically stimulation. By using various control boards, the OSL reader device was successfully interfaced with a personal computer. A software was developed to deliver required commands to operate the OSL reader by using the LabView program (National Instruments, Inc.). In order to evaluate the reliability and the reproducibility of newly designed-OSL reader. Performance testing of the OSL reader was carried out for OSL efficiency, OSL decay curve and signal to noise ratio of the standard $Al_2O_3:C$ OSL material. It was found to be comparable with that of commercial Riso reader system.

• Journal of Bio-Environment Control
• /
• v.23 no.1
• /
• pp.26-30
• /
• 2014

Purpose of this study was a development of a sprayer arm auto control system that could be operated according to distance from pear trees for automation of pest control. Auto control system included two parts, hardware and software. First, controller was made with an MCU and relay switches. Two types of ultra-sonic sensors were installed to measure distance from pear trees: one on/off type that detect up to 3 m, and the other continuous type providing 0~5 V output corresponding to distance of 0~3 m. Second, an auto control algorithm was developed to control. Each spraying arm was controlled according to the sensor-based distance from the pear trees. And it could dodge obstacles to protect itself. Max and min signal values were eliminated, when five sensor signals was collected, and then signals were averaged to reduce sensor's noises. According to results of field experiment, auto control test result was better than non auto control test result. Spraying rates were 69.25% (left line) and 98.09% (right line) under non auto control mode, because pear trees were not planted uniformly. But, auto control test's results were 92.66% (left line) and 94.64% (right line). Spraying rate was increased by maintaining distance from tree.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.2
• /
• pp.69-73
• /
• 2016

Recently, automotive engineers have paid much attention to waste heat recovery technology as a possible means to improve the thermal efficiency of an automotive engine. A large displacement gasoline engine is generally a V-type engine. It is not cost effective to install two superheaters at each exhaust manifold for the heat recovery purposes. A single superheater could be installed as close to the exhaust manifold as possible for the higher recovery efficiency; however, only half of exhaust gas can be used for heat recovery. On the contrary, the exhaust temperature is decreased for the case where the superheater is installed at a junction of two exhaust tail pipes. With the fact in mind, the optimum position of a single superheater was investigated using simulation models developed from a commercial software package (i.e. AMESim). It was found that installing the superheater near the exhaust manifold could recover 3.8 kW more from the engine exhaust despite utilizing only half of the exhaust mass flow. Based on this result, the optimum layout of an automotive waste heat recovery system was developed and proposed in this paper.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.500-507
• /
• 2010

Regard to the global warming, the shipping industries are progressed the dedicated endeavor to reduce greenhouse gas. As the study results of 2009 GHG study team, the $CO_2$ emission of shipping industries exceeded slightly 1.0 billion ton during one year(2007) and it is 3.3% of total $CO_2$ amount exhausted from all industries. This paper are introduced the energy efficiency design index / operation indicator monitoring system(EDiMS) which matched with EVAMOS software released by the dynamics laboratory of Mokpo maritime university. EDiMS can continuously be monitored amounts of $CO_2$, NOx, SOx, and PM emitted from ship and it can be applied as the useful tool of the inventory work of air pollution and the ship energy management plan for the mitigation or reduction of ship emission.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.10
• /
• pp.712-720
• /
• 2001

Algorithms from the research of the layout migration were proposed in the paper. These are automatic recognition algorithm for the VLSI devices from it, graph based construction algorithm to maintain the constraints, dependencies, and design rule between the devices, and high speed compaction algorithm to reduce size of the VLSI area and reuse the design with compacted size for the new technology. Also, this paper describes that why proposed algorithms are essential for the era of the SoC (System on a Chip), design reuse, and IP DB, which are the big concerns in these days. In addition to introduce our algorithms, the benchmark showed that our performance is superior by 27 times faster than that of the commercial one, and has better efficiency by 3 times in disk usage.