• Animal Bioscience
• /
• v.36 no.6
• /
• pp.980-989
• /
• 2023

Objective: Iris pattern recognition system is well developed and practiced in human, however, there is a scarcity of information on application of iris recognition system in animals at the field conditions where the major challenge is to capture a high-quality iris image from a constantly moving non-cooperative animal even when restrained properly. The aim of the study was to validate and identify Black Bengal goat biometrically to improve animal management in its traceability system. Methods: Forty-nine healthy, disease free, 3 months±6 days old female Black Bengal goats were randomly selected at the farmer's field. Eye images were captured from the left eye of an individual goat at 3, 6, 9, and 12 months of age using a specialized camera made for human iris scanning. iGoat software was used for matching the same individual goats at 3, 6, 9, and 12 months of ages. Resnet152V2 deep learning algorithm was further applied on same image sets to predict matching percentages using only captured eye images without extracting their iris features. Results: The matching threshold computed within and between goats was 55%. The accuracies of template matching of goats at 3, 6, 9, and 12 months of ages were recorded as 81.63%, 90.24%, 44.44%, and 16.66%, respectively. As the accuracies of matching the goats at 9 and 12 months of ages were low and below the minimum threshold matching percentage, this process of iris pattern matching was not acceptable. The validation accuracies of resnet152V2 deep learning model were found 82.49%, 92.68%, 77.17%, and 87.76% for identification of goat at 3, 6, 9, and 12 months of ages, respectively after training the model. Conclusion: This study strongly supported that deep learning method using eye images could be used as a signature for biometric identification of an individual goat.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.158-163
• /
• 2023

Recently, the global demands for high voltage power semiconductors are increasing across various industrial fields. The use of electric cars with high safety and convenience is becoming practical, and IGBT modules of 3.3 kV and 1.2 kA or higher are used for electric locomotives. Delicate design and advanced process technology are required, and research on the optimization of high-voltage IGBT parts is urgently needed in the industry. In this study, we attempted to design a simulation process through TCAD (technology computer-aid design) software to optimize the process conditions of the fielding process among the core unit processes for an especial high yield voltage. As well, the prior circuit technology design and a ring pattern with a large number of ring formation structures outside the wafer similar to the chip structure of other companies were constructed for 3.3 kV NPT-IGBT through a unit process demonstration experiment. The ring pattern was designed with 21 rings and the width of the ring was 6.6 ㎛. By changing the spacing between patterns from 17.4 ㎛ to 35.4 ㎛, it was possible to optimize the spacing from 19.2 ㎛ to 18.4 ㎛.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.1
• /
• pp.126-146
• /
• 2024

Caladium bicolor is one of the most popular plants in Thailand. The original species of Caladium bicolor was found a hundred years ago. Until now, there are more than 500 species through multiplication. The classification of Caladium bicolor can be done by using its color and shape. This study aims to develop a model to classify Caladium bicolor using a transfer learning technique. This work also presents a proof of concept, GUI design, and web application deployment using the user-design-center method. We also evaluated the performance of the following pre-trained models in this work, and the results are as follow: 87.29% for AlexNet, 90.68% for GoogleNet, 93.59% for XceptionNet, 93.22% for MobileNetV2, 89.83% for RestNet18, 88.98% for RestNet50, 97.46% for RestNet101, and 94.92% for InceptionResNetV2. This work was implemented using MATLAB R2023a.

• International Journal of Computer Science & Network Security
• /
• v.24 no.1
• /
• pp.95-106
• /
• 2024

The article is devoted to the design and development of an information system for preserving the results of testing to verify the residual knowledge of students of the resource for training specialists in information and communication technologies. The purpose of the study is to provide a scientific justification for the problem of developing professional training of specialists in information and communication technologies in the process of using an information system to save test results to verify students' residual knowledge and to verify the effectiveness of its implementation in universities. According to the results of the experiment, it can be argued that the introduction of an information system to preserve the results of testing to test students' residual knowledge in the educational process contributes to the professional training of specialists in information and communication technologies at the universities of Ukraine. The practice of development and use of modern information technologies focused on the implementation of psychological and pedagogical goals of teaching and education is fundamentally new mediated by modern technical and technological innovations.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.247-256
• /
• 2024

The glass series modified by tungsten oxide was created using the compounds (75-x) B₂O₃- 10SrCO₃- 8TeO₂- 7ZnO - xWO₃, where x = 0, 1, 5, 10, 22, 27, 34, and 40% mole percentage. A UV-visible spectrophotometer and thermogravimetric-differential thermal analysis (TG-DTA) methods were employed to characterize the specimen's optical and phase transition attributes, respectively. The mass-attenuation coefficient (AC) of all created glasses from BSTZW0 to BSTZ7 was estimated using Geant4 code from 0.05 to 3 MeV and compared to the XCOM software results, with a relative difference of less than 2% between the two results. The increase of WO₃ percentage lead to an increase in the Linear-AC at each studied energy, and this is mainly due to the fact that the higher the percentage of WO₃ in the glass increases its density which causes an increase in the Linear-AC, so an energy of 0.06 MeV, as an example, the values of the Linear-AC was 4.009, 4.509, 5.442, 6812, 8.564, 9.856, 10.999 and 11.628 cm^-1 form BSTZW0 too BSTZW7, respectively. The Half-VL (value layer), Mean-FP (free path), Tenth-VL, and Radiation attenuation performance (RAP) were also calculated for the current BSTZW-glass samples and revealed that BSTZW7 had the best gamma ray attenuation performance at all discussed energies when compared to other studied glass samples.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1526-1528
• /
• 1999

In this papaer, 7-segment was implemented using AC powder EL. ZnS:Cu and $BaTiO_3$ was used as a phosphor and dielectric respectively. The preparation of phosphor and dielectic layer was performed with screen printing. The implemented system of 7-segment was divided as following; EL display. driving circuit. software for driving. The properties of fabricated devices was measured with EL spectrum. brightness and J-V.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.511-513
• /
• 2005

하드웨어의 성능향상으로 임베디드 통신 소프트웨어의 복잡도가 크게 증가되고, 이에 따르는 추가적인 개발 비용이 발생하고 있다. 개발자들은 임베디드 통신 소프트웨어의 복잡도를 해결하는데 필요한 소프트웨어 도구와 기술을 필요로 하고 있다. 본 논문에서는 임베디드 통신 소프트웨어 개발에 효과적인 SDL(Specification Description Language) 기반의 통합 개발도구인 SDT(SDL Design Tool)를 사용하여 소프트웨어를 개발하는 절차에 대하여 기술한다. 그리고 통신 소프트웨어인 ITU-T V.76 프로토콜에 개발 절차를 적용하여, SDT를 사용한 개발 절차와 일반적인 임베디드 통신 소프트웨어 개발 절차를 비교, 분석한다. 그 결과, SDT를 사용한 개발 절차가 개발 효율성과 유지보수 효율성에서 더 좋은 성능을 보였다.

• Coupled systems mechanics
• /
• v.1 no.2
• /
• pp.133-154
• /
• 2012

In this paper a bridge flutter prediction is performed by using advanced numerical simulation. Two novel approaches were developed simultaneously by utilizing the ANSYS v12.1 commercial software package. The first one is a fluid-structure interaction simulation involving the three-dimensional elastic motion of a bridge deck and the fluid flow around it. The second one is an updated forced oscillation technique based on the dynamic mode shapes of the bridge. An aeroelastic wind tunnel model was constructed in order to validate the numerical results. Good agreement between the numerical results and the measurements proves the applicability of the novel methods in bridge flutter assessment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.285-285
• /
• 2009

Due to a development of a modem technology as Power Line Communication(PLC) over 200 Mbps, the high-speed multi-media data trasmission could be currently possible. In This paper we develop a high quality media transmitter-receiver based on merging the HomePlug AV, which is 200 Mbps class PLC technology and HDMI Interface technology. Smart Live 6 software were used for the assessment of audio property. As the result of measurement of the HD class images by capturing from the receiver of the PLC, the quality of images couldn't be confirm any deterioration, which has compared with original reflections. In case of audio part as the result of confirmation of the Phase, Magnitude, it has been confirmed that over 90% of nomal transmition and receiving of acoustic signal.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.399-402
• /
• 2004

This paper presents a system-on-chip prototype implementing a full integration for a portable digital audio system. The chip is composed of a audio processor block to implements audio decoding and voice compression or decompression software, a system control block including 8-bit MCU core and Memory Management Unit (MMU) a low power 16-bit ${\Sigma}{\Delta}$ CODEC, two DC-to-BC converter, and a flash memory controller. In order to support other audio algorithms except Mask ROM type's fixed codes, a novel 16-bit fixed-point DSP core with the program-download architecture is proposed. Funker, an efficient power management technique such as task-based clock management is implemented to reduce power consumption for portable application. The proposed chip has been fabricated with a 4 metal 0.25um CMOS technology and the chip area is about 7.1 mm ${\times}$ 7.1mm with 100mW power dissipation at 2.5V power supply.